The LteSpectrumPhy models the physical layer of LTE. More...

#include "lte-spectrum-phy.h"

Inheritance diagram for ns3::LteSpectrumPhy:

Collaboration diagram for ns3::LteSpectrumPhy:

Public Types
enum	State { IDLE , TX_DL_CTRL , TX_DATA , TX_UL_SRS , RX_DL_CTRL , RX_DATA , RX_UL_SRS }
	PHY states. More...

Public Member Functions
	LteSpectrumPhy ()

	~LteSpectrumPhy () override

void	AddCtrlSinrChunkProcessor (Ptr< LteChunkProcessor > p)

void	AddDataPowerChunkProcessor (Ptr< LteChunkProcessor > p)

void	AddDataSinrChunkProcessor (Ptr< LteChunkProcessor > p)

void	AddExpectedTb (uint16_t rnti, uint8_t ndi, uint16_t size, uint8_t mcs, std::vector< int > map, uint8_t layer, uint8_t harqId, uint8_t rv, bool downlink)

void	AddInterferenceCtrlChunkProcessor (Ptr< LteChunkProcessor > p)
	LteChunkProcessor devoted to evaluate interference + noise power in control symbols of the subframe.

void	AddInterferenceDataChunkProcessor (Ptr< LteChunkProcessor > p)
	LteChunkProcessor devoted to evaluate interference + noise power in data symbols of the subframe.

void	AddRsPowerChunkProcessor (Ptr< LteChunkProcessor > p)

int64_t	AssignStreams (int64_t stream)
	Assign a fixed random variable stream number to the random variables used by this model.

void	DoDispose () override
	Destructor implementation.

Ptr< Object >	GetAntenna () const override
	Get the AntennaModel used by this SpectrumPhy instance for transmission and/or reception.

Ptr< SpectrumChannel >	GetChannel ()

Ptr< NetDevice >	GetDevice () const override
	Get the associated NetDevice instance.

Ptr< MobilityModel >	GetMobility () const override
	Get the associated MobilityModel instance.

Ptr< const SpectrumModel >	GetRxSpectrumModel () const override

void	RemoveExpectedTb (uint16_t rnti)
	Remove expected transport block.

void	Reset ()
	reset the internal state

void	SetAntenna (Ptr< AntennaModel > a)
	set the AntennaModel to be used

void	SetCellId (uint16_t cellId)

void	SetChannel (Ptr< SpectrumChannel > c) override
	Set the channel attached to this device.

void	SetComponentCarrierId (uint8_t componentCarrierId)

void	SetDevice (Ptr< NetDevice > d) override
	Set the associated NetDevice instance.

void	SetHarqPhyModule (Ptr< LteHarqPhy > harq)
	Set HARQ phy function.

void	SetLtePhyDlHarqFeedbackCallback (LtePhyDlHarqFeedbackCallback c)
	set the callback for the DL HARQ feedback as part of the interconnections between the LteSpectrumPhy and the PHY

void	SetLtePhyRxCtrlEndErrorCallback (LtePhyRxCtrlEndErrorCallback c)
	set the callback for the erroneous end of a RX ctrl frame, as part of the interconnections between the LteSpectrumPhy and the PHY

void	SetLtePhyRxCtrlEndOkCallback (LtePhyRxCtrlEndOkCallback c)
	set the callback for the successful end of a RX ctrl frame, as part of the interconnections between the LteSpectrumPhy and the PHY

void	SetLtePhyRxDataEndErrorCallback (LtePhyRxDataEndErrorCallback c)
	set the callback for the end of a RX in error, as part of the interconnections between the PHY and the MAC

void	SetLtePhyRxDataEndOkCallback (LtePhyRxDataEndOkCallback c)
	set the callback for the successful end of a RX, as part of the interconnections between the PHY and the MAC

void	SetLtePhyRxPssCallback (LtePhyRxPssCallback c)
	set the callback for the reception of the PSS as part of the interconnections between the LteSpectrumPhy and the UE PHY

void	SetLtePhyUlHarqFeedbackCallback (LtePhyUlHarqFeedbackCallback c)
	set the callback for the UL HARQ feedback as part of the interconnections between the LteSpectrumPhy and the PHY

void	SetMobility (Ptr< MobilityModel > m) override
	Set the mobility model associated with this device.

void	SetNoisePowerSpectralDensity (Ptr< const SpectrumValue > noisePsd)
	set the noise power spectral density

void	SetState (State newState)
	Set the state of the phy layer.

void	SetTransmissionMode (uint8_t txMode)

void	SetTxPowerSpectralDensity (Ptr< SpectrumValue > txPsd)
	set the Power Spectral Density of outgoing signals in W/Hz.

void	StartRx (Ptr< SpectrumSignalParameters > params) override
	Notify the SpectrumPhy instance of an incoming signal.

void	StartRxData (Ptr< LteSpectrumSignalParametersDataFrame > params)
	Start receive data function.

void	StartRxDlCtrl (Ptr< LteSpectrumSignalParametersDlCtrlFrame > lteDlCtrlRxParams)
	Start receive DL control function.

void	StartRxUlSrs (Ptr< LteSpectrumSignalParametersUlSrsFrame > lteUlSrsRxParams)
	Start receive UL SRS function.

bool	StartTxDataFrame (Ptr< PacketBurst > pb, std::list< Ptr< LteControlMessage > > ctrlMsgList, Time duration)
	Start a transmission of data frame in DL and UL.

bool	StartTxDlCtrlFrame (std::list< Ptr< LteControlMessage > > ctrlMsgList, bool pss)
	Start a transmission of control frame in DL.

bool	StartTxUlSrsFrame ()
	Start a transmission of control frame in UL.

void	UpdateSinrPerceived (const SpectrumValue &sinr)

Public Member Functions inherited from ns3::SpectrumPhy
	SpectrumPhy ()

	SpectrumPhy (const SpectrumPhy &)=delete

	~SpectrumPhy () override

SpectrumPhy &	operator= (const SpectrumPhy &)=delete

Public Member Functions inherited from ns3::Object
	Object ()
	Constructor.

	~Object () override
	Destructor.

void	AggregateObject (Ptr< Object > other)
	Aggregate two Objects together.

void	Dispose ()
	Dispose of this Object.

AggregateIterator	GetAggregateIterator () const
	Get an iterator to the Objects aggregated to this one.

TypeId	GetInstanceTypeId () const override
	Get the most derived TypeId for this Object.

template<typename T >
Ptr< T >	GetObject () const
	Get a pointer to the requested aggregated Object.

template<>
Ptr< Object >	GetObject () const
	Specialization of () for objects of type ns3::Object.

template<typename T >
Ptr< T >	GetObject (TypeId tid) const
	Get a pointer to the requested aggregated Object by TypeId.

template<>
Ptr< Object >	GetObject (TypeId tid) const
	Specialization of (TypeId tid) for objects of type ns3::Object.

void	Initialize ()
	Invoke DoInitialize on all Objects aggregated to this one.

bool	IsInitialized () const
	Check if the object has been initialized.

void	UnidirectionalAggregateObject (Ptr< Object > other)
	Aggregate an Object to another Object.

Public Member Functions inherited from ns3::SimpleRefCount< Object, ObjectBase, ObjectDeleter >
	SimpleRefCount ()
	Default constructor.

	SimpleRefCount (const SimpleRefCount &o)
	Copy constructor.

uint32_t	GetReferenceCount () const
	Get the reference count of the object.

SimpleRefCount &	operator= (const SimpleRefCount &o)
	Assignment operator.

void	Ref () const
	Increment the reference count.

void	Unref () const
	Decrement the reference count.

Public Member Functions inherited from ns3::ObjectBase
virtual	~ObjectBase ()
	Virtual destructor.

void	GetAttribute (std::string name, AttributeValue &value, bool permissive=false) const
	Get the value of an attribute, raising fatal errors if unsuccessful.

bool	GetAttributeFailSafe (std::string name, AttributeValue &value) const
	Get the value of an attribute without raising errors.

void	SetAttribute (std::string name, const AttributeValue &value)
	Set a single attribute, raising fatal errors if unsuccessful.

bool	SetAttributeFailSafe (std::string name, const AttributeValue &value)
	Set a single attribute without raising errors.

bool	TraceConnect (std::string name, std::string context, const CallbackBase &cb)
	Connect a TraceSource to a Callback with a context.

bool	TraceConnectWithoutContext (std::string name, const CallbackBase &cb)
	Connect a TraceSource to a Callback without a context.

bool	TraceDisconnect (std::string name, std::string context, const CallbackBase &cb)
	Disconnect from a TraceSource a Callback previously connected with a context.

bool	TraceDisconnectWithoutContext (std::string name, const CallbackBase &cb)
	Disconnect from a TraceSource a Callback previously connected without a context.

Static Public Member Functions
static TypeId	GetTypeId ()
	Get the type ID.

Static Public Member Functions inherited from ns3::SpectrumPhy
static TypeId	GetTypeId ()
	Get the type ID.

Static Public Member Functions inherited from ns3::Object
static TypeId	GetTypeId ()
	Register this type.

Static Public Member Functions inherited from ns3::ObjectBase
static TypeId	GetTypeId ()
	Get the type ID.

Private Member Functions
void	ChangeState (State newState)
	Change state function.

void	EndRxData ()
	End receive data function.

void	EndRxDlCtrl ()
	End receive DL control function.

void	EndRxUlSrs ()
	End receive UL SRS function.

void	EndTxData ()
	End transmit data function.

void	EndTxDlCtrl ()
	End transmit DL control function.

void	EndTxUlSrs ()
	End transmit UL SRS function.

void	SetTxModeGain (uint8_t txMode, double gain)
	Set transmit mode gain function.

Private Attributes
Ptr< AntennaModel >	m_antenna
	the antenna model

uint16_t	m_cellId
	the cell ID

Ptr< SpectrumChannel >	m_channel
	the channel

uint8_t	m_componentCarrierId
	the component carrier ID

bool	m_ctrlErrorModelEnabled
	when true (default) the phy error model is enabled for DL ctrl frame

bool	m_dataErrorModelEnabled
	when true (default) the phy error model is enabled

Ptr< NetDevice >	m_device
	the device

TracedCallback< PhyReceptionStatParameters >	m_dlPhyReception
	Trace information regarding PHY stats from DL Rx perspective PhyReceptionStatParameters (see lte-common.h)

EventId	m_endRxDataEvent
	end receive data event

EventId	m_endRxDlCtrlEvent
	end receive DL control event

EventId	m_endRxUlSrsEvent
	end receive UL SRS event

EventId	m_endTxEvent
	end transmit event

expectedTbs_t	m_expectedTbs
	the expected TBS

Time	m_firstRxDuration
	the first receive duration

Time	m_firstRxStart
	the first receive start

Ptr< LteHarqPhy >	m_harqPhyModule
	the HARQ phy module

Ptr< LteInterference >	m_interferenceCtrl
	the control interference

Ptr< LteInterference >	m_interferenceData
	the data interference

uint8_t	m_layersNum
	layers num

LtePhyDlHarqFeedbackCallback	m_ltePhyDlHarqFeedbackCallback
	the LTE phy DL HARQ feedback callback

LtePhyRxCtrlEndErrorCallback	m_ltePhyRxCtrlEndErrorCallback
	the LTE phy receive control end error callback

LtePhyRxCtrlEndOkCallback	m_ltePhyRxCtrlEndOkCallback
	the LTE phy receive control end ok callback

LtePhyRxDataEndErrorCallback	m_ltePhyRxDataEndErrorCallback
	the LTE phy receive data end error callback

LtePhyRxDataEndOkCallback	m_ltePhyRxDataEndOkCallback
	the LTE phy receive data end ok callback

LtePhyRxPssCallback	m_ltePhyRxPssCallback
	the LTE phy receive PSS callback

LtePhyUlHarqFeedbackCallback	m_ltePhyUlHarqFeedbackCallback
	the LTE phy UL HARQ feedback callback

Ptr< MobilityModel >	m_mobility
	the modility model

TracedCallback< Ptr< const Packet > >	m_phyRxEndErrorTrace
	the phy receive end error trace callback

TracedCallback< Ptr< const Packet > >	m_phyRxEndOkTrace
	the phy receive end ok trace callback

TracedCallback< Ptr< const PacketBurst > >	m_phyRxStartTrace
	the phy receive start trace callback

TracedCallback< Ptr< const PacketBurst > >	m_phyTxEndTrace
	the phy transmit end trace callback

TracedCallback< Ptr< const PacketBurst > >	m_phyTxStartTrace
	the phy transmit start trace callback

Ptr< UniformRandomVariable >	m_random
	Provides uniform random variables.

std::list< Ptr< LteControlMessage > >	m_rxControlMessageList
	the receive control message list

std::list< Ptr< PacketBurst > >	m_rxPacketBurstList
	the receive burst list

Ptr< const SpectrumModel >	m_rxSpectrumModel
	the spectrum model

SpectrumValue	m_sinrPerceived
	the preceived SINR

State	m_state
	the state

uint8_t	m_transmissionMode
	for UEs: store the transmission mode

std::list< Ptr< LteControlMessage > >	m_txControlMessageList
	the transmit control message list

std::vector< double >	m_txModeGain
	duplicate value of LteUePhy

Ptr< PacketBurst >	m_txPacketBurst
	the transmit packet burst

Ptr< SpectrumValue >	m_txPsd
	the transmit PSD

TracedCallback< PhyReceptionStatParameters >	m_ulPhyReception
	Trace information regarding PHY stats from UL Rx perspective PhyReceptionStatParameters (see lte-common.h)

Friends
class	LteUePhy
	allow LteUePhy class friend access

Additional Inherited Members
Protected Member Functions inherited from ns3::Object
	Object (const Object &o)
	Copy an Object.

virtual void	DoInitialize ()
	Initialize() implementation.

virtual void	NotifyNewAggregate ()
	Notify all Objects aggregated to this one of a new Object being aggregated.

Protected Member Functions inherited from ns3::ObjectBase
void	ConstructSelf (const AttributeConstructionList &attributes)
	Complete construction of ObjectBase; invoked by derived classes.

virtual void	NotifyConstructionCompleted ()
	Notifier called once the ObjectBase is fully constructed.

Related Symbols inherited from ns3::ObjectBase
static TypeId	GetObjectIid ()
	Ensure the TypeId for ObjectBase gets fully configured to anchor the inheritance tree properly.

Detailed Description

The LteSpectrumPhy models the physical layer of LTE.

It supports a single antenna model instance which is used for both transmission and reception.

Definition at line 138 of file lte-spectrum-phy.h.

Member Enumeration Documentation

◆ State

enum ns3::LteSpectrumPhy::State

PHY states.

Enumerator
IDLE
TX_DL_CTRL
TX_DATA
TX_UL_SRS
RX_DL_CTRL
RX_DATA
RX_UL_SRS

Definition at line 147 of file lte-spectrum-phy.h.

Constructor & Destructor Documentation

◆ LteSpectrumPhy()

ns3::LteSpectrumPhy::LteSpectrumPhy ( )

Definition at line 87 of file lte-spectrum-phy.cc.

References ns3::CreateObject(), m_interferenceCtrl, m_interferenceData, m_random, m_txModeGain, and NS_LOG_FUNCTION.

Here is the call graph for this function:

◆ ~LteSpectrumPhy()

ns3::LteSpectrumPhy::~LteSpectrumPhy ( )

override

Definition at line 107 of file lte-spectrum-phy.cc.

References m_expectedTbs, m_txModeGain, and NS_LOG_FUNCTION.

Member Function Documentation

◆ AddCtrlSinrChunkProcessor()

void ns3::LteSpectrumPhy::AddCtrlSinrChunkProcessor ( Ptr< LteChunkProcessor > p )

Parameters

p	the new LteChunkProcessor to be added to the ctrl processing chain

Definition at line 1280 of file lte-spectrum-phy.cc.

References m_interferenceCtrl.

◆ AddDataPowerChunkProcessor()

void ns3::LteSpectrumPhy::AddDataPowerChunkProcessor ( Ptr< LteChunkProcessor > p )

Parameters

p	the new LteChunkProcessor to be added to the Data Channel power processing chain

Definition at line 1256 of file lte-spectrum-phy.cc.

References m_interferenceData.

◆ AddDataSinrChunkProcessor()

void ns3::LteSpectrumPhy::AddDataSinrChunkProcessor ( Ptr< LteChunkProcessor > p )

Parameters

p	the new LteChunkProcessor to be added to the data processing chain

Definition at line 1262 of file lte-spectrum-phy.cc.

References m_interferenceData.

◆ AddExpectedTb()

void ns3::LteSpectrumPhy::AddExpectedTb	(	uint16_t	rnti,
		uint8_t	ndi,
		uint16_t	size,
		uint8_t	mcs,
		std::vector< int >	map,
		uint8_t	layer,
		uint8_t	harqId,
		uint8_t	rv,
		bool	downlink )

Parameters

rnti	the RNTI of the source of the TB
ndi	new data indicator flag
size	the size of the TB
mcs	the MCS of the TB
map	the map of RB(s) used
layer	the layer (in case of MIMO tx)
harqId	the id of the HARQ process (valid only for DL)
rv	the redundancy version
downlink	true when the TB is for DL

Definition at line 887 of file lte-spectrum-phy.cc.

References m_expectedTbs, ns3::TbId_t::m_layer, ns3::TbId_t::m_rnti, and NS_LOG_FUNCTION.

◆ AddInterferenceCtrlChunkProcessor()

void ns3::LteSpectrumPhy::AddInterferenceCtrlChunkProcessor ( Ptr< LteChunkProcessor > p )

LteChunkProcessor devoted to evaluate interference + noise power in control symbols of the subframe.

Parameters

p	the new LteChunkProcessor to be added to the data processing chain

Definition at line 1268 of file lte-spectrum-phy.cc.

References m_interferenceCtrl.

◆ AddInterferenceDataChunkProcessor()

void ns3::LteSpectrumPhy::AddInterferenceDataChunkProcessor ( Ptr< LteChunkProcessor > p )

LteChunkProcessor devoted to evaluate interference + noise power in data symbols of the subframe.

Parameters

p	the new LteChunkProcessor to be added to the data processing chain

Definition at line 1274 of file lte-spectrum-phy.cc.

References m_interferenceData.

◆ AddRsPowerChunkProcessor()

void ns3::LteSpectrumPhy::AddRsPowerChunkProcessor ( Ptr< LteChunkProcessor > p )

Parameters

p	the new LteChunkProcessor to be added to the RS power processing chain

Definition at line 1250 of file lte-spectrum-phy.cc.

References m_interferenceCtrl.

◆ AssignStreams()

int64_t ns3::LteSpectrumPhy::AssignStreams ( int64_t stream )

Assign a fixed random variable stream number to the random variables used by this model.

Return the number of streams (possibly zero) that have been assigned.

Parameters

stream first stream index to use

Returns: the number of stream indices assigned by this model

Definition at line 1312 of file lte-spectrum-phy.cc.

References m_random, and NS_LOG_FUNCTION.

◆ ChangeState()

void ns3::LteSpectrumPhy::ChangeState ( State newState )

private

Change state function.

Parameters

newState the new state to set

Definition at line 383 of file lte-spectrum-phy.cc.

References m_state, and NS_LOG_LOGIC.

Referenced by EndRxData(), EndRxDlCtrl(), EndRxUlSrs(), EndTxData(), EndTxDlCtrl(), EndTxUlSrs(), SetState(), StartRxData(), StartRxDlCtrl(), StartRxUlSrs(), StartTxDataFrame(), StartTxDlCtrlFrame(), and StartTxUlSrsFrame().

Here is the caller graph for this function:

◆ DoDispose()

void ns3::LteSpectrumPhy::DoDispose ( )

overridevirtual

Destructor implementation.

This method is called by Dispose() or by the Object's destructor, whichever comes first.

Subclasses are expected to implement their real destruction code in an overridden version of this method and chain up to their parent's implementation once they are done. i.e, for simplicity, the destructor of every subclass should be empty and its content should be moved to the associated DoDispose() method.

It is safe to call GetObject() from within this method.

Reimplemented from ns3::Object.

Definition at line 115 of file lte-spectrum-phy.cc.

References ns3::Object::DoDispose(), m_channel, m_device, m_interferenceCtrl, m_interferenceData, m_ltePhyDlHarqFeedbackCallback, m_ltePhyRxCtrlEndErrorCallback, m_ltePhyRxCtrlEndOkCallback, m_ltePhyRxDataEndErrorCallback, m_ltePhyRxDataEndOkCallback, m_ltePhyRxPssCallback, m_ltePhyUlHarqFeedbackCallback, m_mobility, ns3::MakeNullCallback(), and NS_LOG_FUNCTION.

Here is the call graph for this function:

◆ EndRxData()

void ns3::LteSpectrumPhy::EndRxData ( )

private

End receive data function.

Definition at line 933 of file lte-spectrum-phy.cc.

References ns3::DlInfoListElement_s::ACK, ChangeState(), ns3::EffectiveCodingRate, ns3::LteRadioBearerTag::GetLayer(), ns3::Time::GetMilliSeconds(), ns3::LteRadioBearerTag::GetRnti(), ns3::LteMiErrorModel::GetTbDecodificationStats(), IDLE, ns3::Callback< R, UArgs >::IsNull(), m_cellId, m_componentCarrierId, m_dataErrorModelEnabled, m_dlPhyReception, m_expectedTbs, m_harqPhyModule, ns3::DlInfoListElement_s::m_harqProcessId, ns3::DlInfoListElement_s::m_harqStatus, m_interferenceData, ns3::TbId_t::m_layer, m_layersNum, m_ltePhyDlHarqFeedbackCallback, m_ltePhyRxCtrlEndOkCallback, m_ltePhyRxDataEndOkCallback, m_ltePhyUlHarqFeedbackCallback, m_phyRxEndErrorTrace, m_phyRxEndOkTrace, m_random, ns3::DlInfoListElement_s::m_rnti, ns3::TbId_t::m_rnti, ns3::UlInfoListElement_s::m_rnti, m_rxControlMessageList, m_rxPacketBurstList, m_sinrPerceived, m_state, ns3::UlInfoListElement_s::m_tpc, m_transmissionMode, m_txModeGain, m_ulPhyReception, ns3::TbStats_t::mi, ns3::DlInfoListElement_s::NACK, ns3::UlInfoListElement_s::NotOk, ns3::Simulator::Now(), NS_ASSERT, NS_ASSERT_MSG, NS_LOG_DEBUG, NS_LOG_FUNCTION, NS_LOG_INFO, NS_LOG_LOGIC, ns3::UlInfoListElement_s::Ok, RX_DATA, and ns3::TbStats_t::tbler.

Referenced by StartRxData().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ EndRxDlCtrl()

void ns3::LteSpectrumPhy::EndRxDlCtrl ( )

private

End receive DL control function.

Definition at line 1179 of file lte-spectrum-phy.cc.

References ChangeState(), ns3::LteMiErrorModel::GetPcfichPdcchError(), IDLE, ns3::Callback< R, UArgs >::IsNull(), m_ctrlErrorModelEnabled, m_interferenceCtrl, m_ltePhyRxCtrlEndErrorCallback, m_ltePhyRxCtrlEndOkCallback, m_random, m_rxControlMessageList, m_sinrPerceived, m_state, m_transmissionMode, m_txModeGain, NS_ASSERT, NS_LOG_DEBUG, NS_LOG_FUNCTION, NS_LOG_LOGIC, and RX_DL_CTRL.

Referenced by StartRxDlCtrl().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ EndRxUlSrs()

void ns3::LteSpectrumPhy::EndRxUlSrs ( )

private

End receive UL SRS function.

Definition at line 1229 of file lte-spectrum-phy.cc.

References ChangeState(), IDLE, m_interferenceCtrl, m_state, NS_ASSERT, and RX_UL_SRS.

Referenced by StartRxUlSrs().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ EndTxData()

void ns3::LteSpectrumPhy::EndTxData ( )

private

End transmit data function.

Definition at line 566 of file lte-spectrum-phy.cc.

References ChangeState(), IDLE, m_phyTxEndTrace, m_state, m_txPacketBurst, NS_ASSERT, NS_LOG_FUNCTION, NS_LOG_LOGIC, and TX_DATA.

Referenced by StartTxDataFrame().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ EndTxDlCtrl()

void ns3::LteSpectrumPhy::EndTxDlCtrl ( )

private

End transmit DL control function.

Definition at line 578 of file lte-spectrum-phy.cc.

References ChangeState(), IDLE, m_state, m_txPacketBurst, NS_ASSERT, NS_LOG_FUNCTION, NS_LOG_LOGIC, and TX_DL_CTRL.

Referenced by StartTxDlCtrlFrame().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ EndTxUlSrs()

void ns3::LteSpectrumPhy::EndTxUlSrs ( )

private

End transmit UL SRS function.

Definition at line 589 of file lte-spectrum-phy.cc.

References ChangeState(), IDLE, m_state, m_txPacketBurst, NS_ASSERT, NS_LOG_FUNCTION, NS_LOG_LOGIC, and TX_UL_SRS.

Referenced by StartTxUlSrsFrame().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ GetAntenna()

Ptr< Object > ns3::LteSpectrumPhy::GetAntenna ( ) const

overridevirtual

Get the AntennaModel used by this SpectrumPhy instance for transmission and/or reception.

Note that in general and depending on each module design, there can be multiple SpectrumPhy instances per NetDevice.

Returns: a Ptr to the AntennaModel used by this SpectrumPhy instance for transmission and/or reception

Implements ns3::SpectrumPhy.

Definition at line 364 of file lte-spectrum-phy.cc.

References m_antenna.

◆ GetChannel()

Ptr< SpectrumChannel > ns3::LteSpectrumPhy::GetChannel ( )

Returns: the previously set channel

Definition at line 258 of file lte-spectrum-phy.cc.

References m_channel.

◆ GetDevice()

Ptr< NetDevice > ns3::LteSpectrumPhy::GetDevice ( ) const

overridevirtual

Get the associated NetDevice instance.

Returns: a Ptr to the associated NetDevice instance

Implements ns3::SpectrumPhy.

Definition at line 223 of file lte-spectrum-phy.cc.

References m_device, and NS_LOG_FUNCTION.

◆ GetMobility()

Ptr< MobilityModel > ns3::LteSpectrumPhy::GetMobility ( ) const

overridevirtual

Get the associated MobilityModel instance.

Returns: a Ptr to the associated MobilityModel instance

Implements ns3::SpectrumPhy.

Definition at line 230 of file lte-spectrum-phy.cc.

References m_mobility, and NS_LOG_FUNCTION.

◆ GetRxSpectrumModel()

Ptr< const SpectrumModel > ns3::LteSpectrumPhy::GetRxSpectrumModel ( ) const

overridevirtual

Returns: returns the SpectrumModel that this SpectrumPhy expects to be used for all SpectrumValues that are passed to StartRx. If 0 is returned, it means that any model will be accepted.

Implements ns3::SpectrumPhy.

Definition at line 264 of file lte-spectrum-phy.cc.

References m_rxSpectrumModel.

◆ GetTypeId()

TypeId ns3::LteSpectrumPhy::GetTypeId ( )

static

Get the type ID.

Returns: the object TypeId

Definition at line 173 of file lte-spectrum-phy.cc.

References m_ctrlErrorModelEnabled, m_dataErrorModelEnabled, m_dlPhyReception, m_phyRxEndErrorTrace, m_phyRxEndOkTrace, m_phyRxStartTrace, m_phyTxEndTrace, m_phyTxStartTrace, m_ulPhyReception, ns3::MakeBooleanAccessor(), ns3::MakeBooleanChecker(), ns3::MakeTraceSourceAccessor(), and ns3::TypeId::SetParent().

Here is the call graph for this function:

◆ RemoveExpectedTb()

void ns3::LteSpectrumPhy::RemoveExpectedTb ( uint16_t rnti )

Remove expected transport block.

When UE context at eNodeB is removed and if UL TB is expected to be received but not transmitted due to break in radio link. The TB with different rnti or lcid remains during the transmission of a new TB and causes problems with m_ulPhyReception trace, since the UE context was already removed. TB has to be removed when ue context at eNodeB is removed

Parameters

rnti	The RNTI of the UE

Definition at line 915 of file lte-spectrum-phy.cc.

References m_expectedTbs, ns3::TbId_t::m_layer, ns3::TbId_t::m_rnti, and NS_LOG_FUNCTION.

◆ Reset()

void ns3::LteSpectrumPhy::Reset ( )

reset the internal state

Definition at line 288 of file lte-spectrum-phy.cc.

References ns3::EventId::Cancel(), IDLE, m_cellId, m_channel, m_endRxDataEvent, m_endRxDlCtrlEvent, m_endRxUlSrsEvent, m_endTxEvent, m_expectedTbs, m_layersNum, m_rxControlMessageList, m_rxPacketBurstList, m_rxSpectrumModel, m_state, m_transmissionMode, m_txControlMessageList, m_txPacketBurst, and NS_LOG_FUNCTION.

Here is the call graph for this function:

◆ SetAntenna()

void ns3::LteSpectrumPhy::SetAntenna ( Ptr< AntennaModel > a )

set the AntennaModel to be used

Parameters

a	the Antenna Model

Definition at line 370 of file lte-spectrum-phy.cc.

References m_antenna, and NS_LOG_FUNCTION.

◆ SetCellId()

void ns3::LteSpectrumPhy::SetCellId ( uint16_t cellId )

Parameters

cellId the Cell Identifier

Definition at line 1238 of file lte-spectrum-phy.cc.

References m_cellId.

◆ SetChannel()

void ns3::LteSpectrumPhy::SetChannel ( Ptr< SpectrumChannel > c )

overridevirtual

Set the channel attached to this device.

Parameters

c	the channel

Implements ns3::SpectrumPhy.

Definition at line 251 of file lte-spectrum-phy.cc.

References m_channel, and NS_LOG_FUNCTION.

◆ SetComponentCarrierId()

void ns3::LteSpectrumPhy::SetComponentCarrierId ( uint8_t componentCarrierId )

Parameters

componentCarrierId the component carrier id

Definition at line 1244 of file lte-spectrum-phy.cc.

References m_componentCarrierId.

◆ SetDevice()

void ns3::LteSpectrumPhy::SetDevice ( Ptr< NetDevice > d )

overridevirtual

Set the associated NetDevice instance.

Parameters

d	the NetDevice instance

Implements ns3::SpectrumPhy.

Definition at line 237 of file lte-spectrum-phy.cc.

References m_device, and NS_LOG_FUNCTION.

◆ SetHarqPhyModule()

void ns3::LteSpectrumPhy::SetHarqPhyModule ( Ptr< LteHarqPhy > harq )

Set HARQ phy function.

Parameters

harq	the HARQ phy module

Definition at line 390 of file lte-spectrum-phy.cc.

References m_harqPhyModule.

◆ SetLtePhyDlHarqFeedbackCallback()

void ns3::LteSpectrumPhy::SetLtePhyDlHarqFeedbackCallback ( LtePhyDlHarqFeedbackCallback c )

set the callback for the DL HARQ feedback as part of the interconnections between the LteSpectrumPhy and the PHY

Parameters

c	the callback

Definition at line 350 of file lte-spectrum-phy.cc.

References m_ltePhyDlHarqFeedbackCallback, and NS_LOG_FUNCTION.

◆ SetLtePhyRxCtrlEndErrorCallback()

void ns3::LteSpectrumPhy::SetLtePhyRxCtrlEndErrorCallback ( LtePhyRxCtrlEndErrorCallback c )

set the callback for the erroneous end of a RX ctrl frame, as part of the interconnections between the LteSpectrumPhy and the PHY

Parameters

c	the callback

Definition at line 336 of file lte-spectrum-phy.cc.

References m_ltePhyRxCtrlEndErrorCallback, and NS_LOG_FUNCTION.

◆ SetLtePhyRxCtrlEndOkCallback()

void ns3::LteSpectrumPhy::SetLtePhyRxCtrlEndOkCallback ( LtePhyRxCtrlEndOkCallback c )

set the callback for the successful end of a RX ctrl frame, as part of the interconnections between the LteSpectrumPhy and the PHY

Parameters

c	the callback

Definition at line 329 of file lte-spectrum-phy.cc.

References m_ltePhyRxCtrlEndOkCallback, and NS_LOG_FUNCTION.

◆ SetLtePhyRxDataEndErrorCallback()

void ns3::LteSpectrumPhy::SetLtePhyRxDataEndErrorCallback ( LtePhyRxDataEndErrorCallback c )

set the callback for the end of a RX in error, as part of the interconnections between the PHY and the MAC

Parameters

c	the callback

Definition at line 315 of file lte-spectrum-phy.cc.

References m_ltePhyRxDataEndErrorCallback, and NS_LOG_FUNCTION.

◆ SetLtePhyRxDataEndOkCallback()

void ns3::LteSpectrumPhy::SetLtePhyRxDataEndOkCallback ( LtePhyRxDataEndOkCallback c )

set the callback for the successful end of a RX, as part of the interconnections between the PHY and the MAC

Parameters

c	the callback

Definition at line 322 of file lte-spectrum-phy.cc.

References m_ltePhyRxDataEndOkCallback, and NS_LOG_FUNCTION.

◆ SetLtePhyRxPssCallback()

void ns3::LteSpectrumPhy::SetLtePhyRxPssCallback ( LtePhyRxPssCallback c )

set the callback for the reception of the PSS as part of the interconnections between the LteSpectrumPhy and the UE PHY

Parameters

c	the callback

Definition at line 343 of file lte-spectrum-phy.cc.

References m_ltePhyRxPssCallback, and NS_LOG_FUNCTION.

◆ SetLtePhyUlHarqFeedbackCallback()

void ns3::LteSpectrumPhy::SetLtePhyUlHarqFeedbackCallback ( LtePhyUlHarqFeedbackCallback c )

set the callback for the UL HARQ feedback as part of the interconnections between the LteSpectrumPhy and the PHY

Parameters

c	the callback

Definition at line 357 of file lte-spectrum-phy.cc.

References m_ltePhyUlHarqFeedbackCallback, and NS_LOG_FUNCTION.

◆ SetMobility()

void ns3::LteSpectrumPhy::SetMobility ( Ptr< MobilityModel > m )

overridevirtual

Set the mobility model associated with this device.

Parameters

m	the mobility model

Implements ns3::SpectrumPhy.

Definition at line 244 of file lte-spectrum-phy.cc.

References m_mobility, and NS_LOG_FUNCTION.

◆ SetNoisePowerSpectralDensity()

void ns3::LteSpectrumPhy::SetNoisePowerSpectralDensity ( Ptr< const SpectrumValue > noisePsd )

set the noise power spectral density

Parameters

noisePsd the Noise Power Spectral Density in power units (Watt, Pascal...) per Hz.

Definition at line 278 of file lte-spectrum-phy.cc.

References m_interferenceCtrl, m_interferenceData, m_rxSpectrumModel, NS_ASSERT, and NS_LOG_FUNCTION.

◆ SetState()

void ns3::LteSpectrumPhy::SetState ( State newState )

Set the state of the phy layer.

Parameters

newState the state

Definition at line 377 of file lte-spectrum-phy.cc.

References ChangeState().

Here is the call graph for this function:

◆ SetTransmissionMode()

void ns3::LteSpectrumPhy::SetTransmissionMode ( uint8_t txMode )

Parameters

txMode UE transmission mode (SISO, MIMO tx diversity, ...)

Definition at line 1286 of file lte-spectrum-phy.cc.

References m_layersNum, m_transmissionMode, m_txModeGain, NS_ASSERT_MSG, NS_LOG_FUNCTION, and ns3::TransmissionModesLayers::TxMode2LayerNum().

Here is the call graph for this function:

◆ SetTxModeGain()

void ns3::LteSpectrumPhy::SetTxModeGain	(	uint8_t	txMode,
		double	gain )

private

Set transmit mode gain function.

Parameters

txMode	the transmit mode
gain	the gain to set

Definition at line 1296 of file lte-spectrum-phy.cc.

References m_txModeGain, and NS_LOG_FUNCTION.

◆ SetTxPowerSpectralDensity()

void ns3::LteSpectrumPhy::SetTxPowerSpectralDensity ( Ptr< SpectrumValue > txPsd )

set the Power Spectral Density of outgoing signals in W/Hz.

Parameters

txPsd

Definition at line 270 of file lte-spectrum-phy.cc.

References m_txPsd, NS_ASSERT, and NS_LOG_FUNCTION.

◆ StartRx()

void ns3::LteSpectrumPhy::StartRx ( Ptr< SpectrumSignalParameters > params )

overridevirtual

Notify the SpectrumPhy instance of an incoming signal.

Parameters

params the parameters of the signals being received

Implements ns3::SpectrumPhy.

Definition at line 600 of file lte-spectrum-phy.cc.

References ns3::DynamicCast(), m_interferenceCtrl, m_interferenceData, m_state, NS_LOG_FUNCTION, NS_LOG_LOGIC, StartRxData(), StartRxDlCtrl(), and StartRxUlSrs().

Referenced by LteDownlinkCtrlSinrTestCase::DoRun(), LteDownlinkDataSinrTestCase::DoRun(), LteUplinkDataSinrTestCase::DoRun(), and LteUplinkSrsSinrTestCase::DoRun().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ StartRxData()

void ns3::LteSpectrumPhy::StartRxData ( Ptr< LteSpectrumSignalParametersDataFrame > params )

Start receive data function.

Parameters

params Ptr<LteSpectrumSignalParametersDataFrame>

Definition at line 640 of file lte-spectrum-phy.cc.

References ChangeState(), EndRxData(), IDLE, m_cellId, m_endRxDataEvent, m_firstRxDuration, m_firstRxStart, m_interferenceData, m_phyRxStartTrace, m_rxControlMessageList, m_rxPacketBurstList, m_state, ns3::Simulator::Now(), NS_ASSERT, NS_FATAL_ERROR, NS_LOG_DEBUG, NS_LOG_FUNCTION, NS_LOG_LOGIC, RX_DATA, RX_DL_CTRL, ns3::Time::S, ns3::Simulator::Schedule(), TX_DATA, TX_DL_CTRL, and TX_UL_SRS.

Referenced by StartRx().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ StartRxDlCtrl()

void ns3::LteSpectrumPhy::StartRxDlCtrl ( Ptr< LteSpectrumSignalParametersDlCtrlFrame > lteDlCtrlRxParams )

Start receive DL control function.

Parameters

lteDlCtrlRxParams Ptr<LteSpectrumSignalParametersDlCtrlFrame>

Definition at line 722 of file lte-spectrum-phy.cc.

References ChangeState(), EndRxDlCtrl(), IDLE, ns3::Callback< R, UArgs >::IsNull(), m_cellId, m_endRxDlCtrlEvent, m_firstRxDuration, m_firstRxStart, m_interferenceCtrl, m_ltePhyRxPssCallback, m_rxControlMessageList, m_state, ns3::Simulator::Now(), NS_ASSERT, NS_ASSERT_MSG, NS_FATAL_ERROR, NS_LOG_FUNCTION, NS_LOG_LOGIC, RX_DATA, RX_DL_CTRL, RX_UL_SRS, ns3::Simulator::Schedule(), TX_DATA, TX_DL_CTRL, and TX_UL_SRS.

Referenced by StartRx().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ StartRxUlSrs()

void ns3::LteSpectrumPhy::StartRxUlSrs ( Ptr< LteSpectrumSignalParametersUlSrsFrame > lteUlSrsRxParams )

Start receive UL SRS function.

Parameters

lteUlSrsRxParams Ptr<LteSpectrumSignalParametersUlSrsFrame>

Definition at line 806 of file lte-spectrum-phy.cc.

References ChangeState(), EndRxUlSrs(), IDLE, m_cellId, m_endRxUlSrsEvent, m_firstRxDuration, m_firstRxStart, m_interferenceCtrl, m_rxControlMessageList, m_state, ns3::Simulator::Now(), NS_ASSERT, NS_FATAL_ERROR, NS_LOG_FUNCTION, NS_LOG_LOGIC, RX_DATA, RX_DL_CTRL, RX_UL_SRS, ns3::Simulator::Schedule(), TX_DATA, TX_DL_CTRL, and TX_UL_SRS.

Referenced by StartRx().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ StartTxDataFrame()

bool ns3::LteSpectrumPhy::StartTxDataFrame	(	Ptr< PacketBurst >	pb,
		std::list< Ptr< LteControlMessage > >	ctrlMsgList,
		Time	duration )

Start a transmission of data frame in DL and UL.

Parameters

pb	the burst of packets to be transmitted in PDSCH/PUSCH
ctrlMsgList	the list of LteControlMessage to send
duration	the duration of the data frame

Returns: true if an error occurred and the transmission was not started, false otherwise.

Definition at line 396 of file lte-spectrum-phy.cc.

References ChangeState(), ns3::Create(), EndTxData(), ns3::Object::GetObject(), IDLE, m_antenna, m_cellId, m_channel, m_endTxEvent, m_phyTxStartTrace, m_state, m_txPacketBurst, m_txPsd, NS_ASSERT, NS_FATAL_ERROR, NS_LOG_FUNCTION, NS_LOG_LOGIC, RX_DATA, RX_DL_CTRL, RX_UL_SRS, ns3::Simulator::Schedule(), TX_DATA, TX_DL_CTRL, and TX_UL_SRS.

Here is the call graph for this function:

◆ StartTxDlCtrlFrame()

bool ns3::LteSpectrumPhy::StartTxDlCtrlFrame	(	std::list< Ptr< LteControlMessage > >	ctrlMsgList,
		bool	pss )

Start a transmission of control frame in DL.

Parameters

ctrlMsgList	the burst of control messages to be transmitted
pss	the flag for transmitting the primary synchronization signal

Returns: true if an error occurred and the transmission was not started, false otherwise.

Definition at line 456 of file lte-spectrum-phy.cc.

References ChangeState(), ns3::Create(), ns3::DL_CTRL_DURATION, EndTxDlCtrl(), ns3::Object::GetObject(), IDLE, m_antenna, m_cellId, m_channel, m_endTxEvent, m_state, m_txPsd, NS_ASSERT, NS_FATAL_ERROR, NS_LOG_FUNCTION, NS_LOG_LOGIC, RX_DATA, RX_DL_CTRL, RX_UL_SRS, ns3::Simulator::Schedule(), TX_DATA, TX_DL_CTRL, and TX_UL_SRS.

Here is the call graph for this function:

◆ StartTxUlSrsFrame()

bool ns3::LteSpectrumPhy::StartTxUlSrsFrame ( )

Start a transmission of control frame in UL.

Returns: true if an error occurred and the transmission was not started, false otherwise.

Definition at line 512 of file lte-spectrum-phy.cc.

References ChangeState(), ns3::Create(), EndTxUlSrs(), ns3::Object::GetObject(), IDLE, m_antenna, m_cellId, m_channel, m_endTxEvent, m_state, m_txPsd, NS_ASSERT, NS_FATAL_ERROR, NS_LOG_FUNCTION, NS_LOG_LOGIC, RX_DATA, RX_DL_CTRL, RX_UL_SRS, ns3::Simulator::Schedule(), TX_DATA, TX_DL_CTRL, TX_UL_SRS, and ns3::UL_SRS_DURATION.

Here is the call graph for this function:

◆ UpdateSinrPerceived()

void ns3::LteSpectrumPhy::UpdateSinrPerceived ( const SpectrumValue & sinr )

Parameters

sinr	vector of sinr perceived per each RB

Definition at line 880 of file lte-spectrum-phy.cc.

References m_sinrPerceived, and NS_LOG_FUNCTION.

Referenced by ns3::LteHelper::InstallSingleEnbDevice(), and ns3::LteHelper::InstallSingleUeDevice().

Here is the caller graph for this function:

Friends And Related Symbol Documentation

◆ LteUePhy

friend class LteUePhy

friend

allow LteUePhy class friend access

Definition at line 435 of file lte-spectrum-phy.h.

Member Data Documentation

◆ m_antenna

Ptr<AntennaModel> ns3::LteSpectrumPhy::m_antenna

private

the antenna model

Definition at line 476 of file lte-spectrum-phy.h.

Referenced by GetAntenna(), SetAntenna(), StartTxDataFrame(), StartTxDlCtrlFrame(), and StartTxUlSrsFrame().

◆ m_cellId

uint16_t ns3::LteSpectrumPhy::m_cellId

private

the cell ID

Definition at line 516 of file lte-spectrum-phy.h.

Referenced by EndRxData(), Reset(), SetCellId(), StartRxData(), StartRxDlCtrl(), StartRxUlSrs(), StartTxDataFrame(), StartTxDlCtrlFrame(), and StartTxUlSrsFrame().

◆ m_channel

Ptr<SpectrumChannel> ns3::LteSpectrumPhy::m_channel

private

the channel

Definition at line 479 of file lte-spectrum-phy.h.

Referenced by DoDispose(), GetChannel(), Reset(), SetChannel(), StartTxDataFrame(), StartTxDlCtrlFrame(), and StartTxUlSrsFrame().

◆ m_componentCarrierId

uint8_t ns3::LteSpectrumPhy::m_componentCarrierId

private

the component carrier ID

Definition at line 518 of file lte-spectrum-phy.h.

Referenced by EndRxData(), and SetComponentCarrierId().

◆ m_ctrlErrorModelEnabled

bool ns3::LteSpectrumPhy::m_ctrlErrorModelEnabled

private

when true (default) the phy error model is enabled for DL ctrl frame

Definition at line 525 of file lte-spectrum-phy.h.

Referenced by EndRxDlCtrl(), and GetTypeId().

◆ m_dataErrorModelEnabled

bool ns3::LteSpectrumPhy::m_dataErrorModelEnabled

private

when true (default) the phy error model is enabled

Definition at line 524 of file lte-spectrum-phy.h.

Referenced by EndRxData(), and GetTypeId().

◆ m_device

Ptr<NetDevice> ns3::LteSpectrumPhy::m_device

private

the device

Definition at line 477 of file lte-spectrum-phy.h.

Referenced by DoDispose(), GetDevice(), and SetDevice().

◆ m_dlPhyReception

TracedCallback<PhyReceptionStatParameters> ns3::LteSpectrumPhy::m_dlPhyReception

private

Trace information regarding PHY stats from DL Rx perspective PhyReceptionStatParameters (see lte-common.h)

Definition at line 542 of file lte-spectrum-phy.h.

Referenced by EndRxData(), and GetTypeId().

◆ m_endRxDataEvent

EventId ns3::LteSpectrumPhy::m_endRxDataEvent

private

end receive data event

Definition at line 551 of file lte-spectrum-phy.h.

Referenced by Reset(), and StartRxData().

◆ m_endRxDlCtrlEvent

EventId ns3::LteSpectrumPhy::m_endRxDlCtrlEvent

private

end receive DL control event

Definition at line 552 of file lte-spectrum-phy.h.

Referenced by Reset(), and StartRxDlCtrl().

◆ m_endRxUlSrsEvent

EventId ns3::LteSpectrumPhy::m_endRxUlSrsEvent

private

end receive UL SRS event

Definition at line 553 of file lte-spectrum-phy.h.

Referenced by Reset(), and StartRxUlSrs().

◆ m_endTxEvent

EventId ns3::LteSpectrumPhy::m_endTxEvent

private

end transmit event

Definition at line 550 of file lte-spectrum-phy.h.

Referenced by Reset(), StartTxDataFrame(), StartTxDlCtrlFrame(), and StartTxUlSrsFrame().

◆ m_expectedTbs

expectedTbs_t ns3::LteSpectrumPhy::m_expectedTbs

private

the expected TBS

Definition at line 519 of file lte-spectrum-phy.h.

Referenced by ~LteSpectrumPhy(), AddExpectedTb(), EndRxData(), RemoveExpectedTb(), and Reset().

◆ m_firstRxDuration

Time ns3::LteSpectrumPhy::m_firstRxDuration

private

the first receive duration

Definition at line 491 of file lte-spectrum-phy.h.

Referenced by StartRxData(), StartRxDlCtrl(), and StartRxUlSrs().

◆ m_firstRxStart

Time ns3::LteSpectrumPhy::m_firstRxStart

private

the first receive start

Definition at line 490 of file lte-spectrum-phy.h.

Referenced by StartRxData(), StartRxDlCtrl(), and StartRxUlSrs().

◆ m_harqPhyModule

Ptr<LteHarqPhy> ns3::LteSpectrumPhy::m_harqPhyModule

private

the HARQ phy module

Definition at line 532 of file lte-spectrum-phy.h.

Referenced by EndRxData(), and SetHarqPhyModule().

◆ m_interferenceCtrl

Ptr<LteInterference> ns3::LteSpectrumPhy::m_interferenceCtrl

private

the control interference

Definition at line 514 of file lte-spectrum-phy.h.

Referenced by LteSpectrumPhy(), AddCtrlSinrChunkProcessor(), AddInterferenceCtrlChunkProcessor(), AddRsPowerChunkProcessor(), DoDispose(), EndRxDlCtrl(), EndRxUlSrs(), SetNoisePowerSpectralDensity(), StartRx(), StartRxDlCtrl(), and StartRxUlSrs().

◆ m_interferenceData

Ptr<LteInterference> ns3::LteSpectrumPhy::m_interferenceData

private

the data interference

Definition at line 513 of file lte-spectrum-phy.h.

Referenced by LteSpectrumPhy(), AddDataPowerChunkProcessor(), AddDataSinrChunkProcessor(), AddInterferenceDataChunkProcessor(), DoDispose(), EndRxData(), SetNoisePowerSpectralDensity(), StartRx(), and StartRxData().

◆ m_layersNum

uint8_t ns3::LteSpectrumPhy::m_layersNum

private

layers num

Definition at line 529 of file lte-spectrum-phy.h.

Referenced by EndRxData(), Reset(), and SetTransmissionMode().

◆ m_ltePhyDlHarqFeedbackCallback

LtePhyDlHarqFeedbackCallback ns3::LteSpectrumPhy::m_ltePhyDlHarqFeedbackCallback

private

the LTE phy DL HARQ feedback callback

Definition at line 534 of file lte-spectrum-phy.h.

Referenced by DoDispose(), EndRxData(), and SetLtePhyDlHarqFeedbackCallback().

◆ m_ltePhyRxCtrlEndErrorCallback

LtePhyRxCtrlEndErrorCallback ns3::LteSpectrumPhy::m_ltePhyRxCtrlEndErrorCallback

private

the LTE phy receive control end error callback

Definition at line 510 of file lte-spectrum-phy.h.

Referenced by DoDispose(), EndRxDlCtrl(), and SetLtePhyRxCtrlEndErrorCallback().

◆ m_ltePhyRxCtrlEndOkCallback

LtePhyRxCtrlEndOkCallback ns3::LteSpectrumPhy::m_ltePhyRxCtrlEndOkCallback

private

the LTE phy receive control end ok callback

Definition at line 508 of file lte-spectrum-phy.h.

Referenced by DoDispose(), EndRxData(), EndRxDlCtrl(), and SetLtePhyRxCtrlEndOkCallback().

◆ m_ltePhyRxDataEndErrorCallback

LtePhyRxDataEndErrorCallback ns3::LteSpectrumPhy::m_ltePhyRxDataEndErrorCallback

private

the LTE phy receive data end error callback

Definition at line 503 of file lte-spectrum-phy.h.

Referenced by DoDispose(), and SetLtePhyRxDataEndErrorCallback().

◆ m_ltePhyRxDataEndOkCallback

LtePhyRxDataEndOkCallback ns3::LteSpectrumPhy::m_ltePhyRxDataEndOkCallback

private

the LTE phy receive data end ok callback

Definition at line 505 of file lte-spectrum-phy.h.

Referenced by DoDispose(), EndRxData(), and SetLtePhyRxDataEndOkCallback().

◆ m_ltePhyRxPssCallback

LtePhyRxPssCallback ns3::LteSpectrumPhy::m_ltePhyRxPssCallback

private

the LTE phy receive PSS callback

Definition at line 511 of file lte-spectrum-phy.h.

Referenced by DoDispose(), SetLtePhyRxPssCallback(), and StartRxDlCtrl().

◆ m_ltePhyUlHarqFeedbackCallback

LtePhyUlHarqFeedbackCallback ns3::LteSpectrumPhy::m_ltePhyUlHarqFeedbackCallback

private

the LTE phy UL HARQ feedback callback

Definition at line 536 of file lte-spectrum-phy.h.

Referenced by DoDispose(), EndRxData(), and SetLtePhyUlHarqFeedbackCallback().

◆ m_mobility

Ptr<MobilityModel> ns3::LteSpectrumPhy::m_mobility

private

the modility model

Definition at line 475 of file lte-spectrum-phy.h.

Referenced by DoDispose(), GetMobility(), and SetMobility().

◆ m_phyRxEndErrorTrace

TracedCallback<Ptr<const Packet> > ns3::LteSpectrumPhy::m_phyRxEndErrorTrace

private

the phy receive end error trace callback

Definition at line 500 of file lte-spectrum-phy.h.

Referenced by EndRxData(), and GetTypeId().

◆ m_phyRxEndOkTrace

TracedCallback<Ptr<const Packet> > ns3::LteSpectrumPhy::m_phyRxEndOkTrace

private

the phy receive end ok trace callback

Definition at line 498 of file lte-spectrum-phy.h.

Referenced by EndRxData(), and GetTypeId().

◆ m_phyRxStartTrace

TracedCallback<Ptr<const PacketBurst> > ns3::LteSpectrumPhy::m_phyRxStartTrace

private

the phy receive start trace callback

Definition at line 497 of file lte-spectrum-phy.h.

Referenced by GetTypeId(), and StartRxData().

◆ m_phyTxEndTrace

TracedCallback<Ptr<const PacketBurst> > ns3::LteSpectrumPhy::m_phyTxEndTrace

private

the phy transmit end trace callback

Definition at line 495 of file lte-spectrum-phy.h.

Referenced by EndTxData(), and GetTypeId().

◆ m_phyTxStartTrace

TracedCallback<Ptr<const PacketBurst> > ns3::LteSpectrumPhy::m_phyTxStartTrace

private

the phy transmit start trace callback

Definition at line 494 of file lte-spectrum-phy.h.

Referenced by GetTypeId(), and StartTxDataFrame().

◆ m_random

Ptr<UniformRandomVariable> ns3::LteSpectrumPhy::m_random

private

Provides uniform random variables.

Definition at line 523 of file lte-spectrum-phy.h.

Referenced by LteSpectrumPhy(), AssignStreams(), EndRxData(), and EndRxDlCtrl().

◆ m_rxControlMessageList

std::list<Ptr<LteControlMessage> > ns3::LteSpectrumPhy::m_rxControlMessageList

private

the receive control message list

Definition at line 487 of file lte-spectrum-phy.h.

Referenced by EndRxData(), EndRxDlCtrl(), Reset(), StartRxData(), StartRxDlCtrl(), and StartRxUlSrs().

◆ m_rxPacketBurstList

std::list<Ptr<PacketBurst> > ns3::LteSpectrumPhy::m_rxPacketBurstList

private

the receive burst list

Definition at line 484 of file lte-spectrum-phy.h.

Referenced by EndRxData(), Reset(), and StartRxData().

◆ m_rxSpectrumModel

Ptr<const SpectrumModel> ns3::LteSpectrumPhy::m_rxSpectrumModel

private

the spectrum model

Definition at line 481 of file lte-spectrum-phy.h.

Referenced by GetRxSpectrumModel(), Reset(), and SetNoisePowerSpectralDensity().

◆ m_sinrPerceived

SpectrumValue ns3::LteSpectrumPhy::m_sinrPerceived

private

the preceived SINR

Definition at line 520 of file lte-spectrum-phy.h.

Referenced by EndRxData(), EndRxDlCtrl(), and UpdateSinrPerceived().

◆ m_state

State ns3::LteSpectrumPhy::m_state

private

the state

Definition at line 489 of file lte-spectrum-phy.h.

Referenced by ChangeState(), EndRxData(), EndRxDlCtrl(), EndRxUlSrs(), EndTxData(), EndTxDlCtrl(), EndTxUlSrs(), Reset(), StartRx(), StartRxData(), StartRxDlCtrl(), StartRxUlSrs(), StartTxDataFrame(), StartTxDlCtrlFrame(), and StartTxUlSrsFrame().

◆ m_transmissionMode

uint8_t ns3::LteSpectrumPhy::m_transmissionMode

private

for UEs: store the transmission mode

Definition at line 528 of file lte-spectrum-phy.h.

Referenced by EndRxData(), EndRxDlCtrl(), Reset(), and SetTransmissionMode().

◆ m_txControlMessageList

std::list<Ptr<LteControlMessage> > ns3::LteSpectrumPhy::m_txControlMessageList

private

the transmit control message list

Definition at line 486 of file lte-spectrum-phy.h.

Referenced by Reset().

◆ m_txModeGain

std::vector<double> ns3::LteSpectrumPhy::m_txModeGain

private

duplicate value of LteUePhy

Definition at line 530 of file lte-spectrum-phy.h.

Referenced by LteSpectrumPhy(), ~LteSpectrumPhy(), EndRxData(), EndRxDlCtrl(), SetTransmissionMode(), and SetTxModeGain().

◆ m_txPacketBurst

Ptr<PacketBurst> ns3::LteSpectrumPhy::m_txPacketBurst

private

the transmit packet burst

Definition at line 483 of file lte-spectrum-phy.h.

Referenced by EndTxData(), EndTxDlCtrl(), EndTxUlSrs(), Reset(), and StartTxDataFrame().

◆ m_txPsd

Ptr<SpectrumValue> ns3::LteSpectrumPhy::m_txPsd

private

the transmit PSD

Definition at line 482 of file lte-spectrum-phy.h.

Referenced by SetTxPowerSpectralDensity(), StartTxDataFrame(), StartTxDlCtrlFrame(), and StartTxUlSrsFrame().

◆ m_ulPhyReception

TracedCallback<PhyReceptionStatParameters> ns3::LteSpectrumPhy::m_ulPhyReception

private

Trace information regarding PHY stats from UL Rx perspective PhyReceptionStatParameters (see lte-common.h)

Definition at line 548 of file lte-spectrum-phy.h.

Referenced by EndRxData(), and GetTypeId().

The documentation for this class was generated from the following files:

src/lte/model/lte-spectrum-phy.h
src/lte/model/lte-spectrum-phy.cc

Public Types

Public Member Functions

Static Public Member Functions

Private Member Functions

Private Attributes

Friends

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ State

Constructor & Destructor Documentation

◆ LteSpectrumPhy()

◆ ~LteSpectrumPhy()

Member Function Documentation

◆ AddCtrlSinrChunkProcessor()

◆ AddDataPowerChunkProcessor()

◆ AddDataSinrChunkProcessor()

◆ AddExpectedTb()

◆ AddInterferenceCtrlChunkProcessor()

◆ AddInterferenceDataChunkProcessor()

◆ AddRsPowerChunkProcessor()

◆ AssignStreams()

◆ ChangeState()

◆ DoDispose()

◆ EndRxData()

◆ EndRxDlCtrl()

◆ EndRxUlSrs()

◆ EndTxData()

◆ EndTxDlCtrl()

◆ EndTxUlSrs()

◆ GetAntenna()

◆ GetChannel()

◆ GetDevice()

◆ GetMobility()

◆ GetRxSpectrumModel()

◆ GetTypeId()

◆ RemoveExpectedTb()

◆ Reset()

◆ SetAntenna()

◆ SetCellId()

◆ SetChannel()

◆ SetComponentCarrierId()

◆ SetDevice()

◆ SetHarqPhyModule()

◆ SetLtePhyDlHarqFeedbackCallback()

◆ SetLtePhyRxCtrlEndErrorCallback()

◆ SetLtePhyRxCtrlEndOkCallback()

◆ SetLtePhyRxDataEndErrorCallback()

◆ SetLtePhyRxDataEndOkCallback()

◆ SetLtePhyRxPssCallback()

◆ SetLtePhyUlHarqFeedbackCallback()

◆ SetMobility()

◆ SetNoisePowerSpectralDensity()

◆ SetState()

◆ SetTransmissionMode()

◆ SetTxModeGain()

◆ SetTxPowerSpectralDensity()

◆ StartRx()

◆ StartRxData()

◆ StartRxDlCtrl()

◆ StartRxUlSrs()

◆ StartTxDataFrame()

◆ StartTxDlCtrlFrame()

◆ StartTxUlSrsFrame()

◆ UpdateSinrPerceived()

Friends And Related Symbol Documentation

◆ LteUePhy

Member Data Documentation

◆ m_antenna

◆ m_cellId

◆ m_channel

◆ m_componentCarrierId

◆ m_ctrlErrorModelEnabled

◆ m_dataErrorModelEnabled

◆ m_device

◆ m_dlPhyReception

◆ m_endRxDataEvent

◆ m_endRxDlCtrlEvent

◆ m_endRxUlSrsEvent

◆ m_endTxEvent