|
| class | ns3::BsrLteControlMessage |
| | The uplink BsrLteControlMessage defines the specific extension of the CE element for reporting the buffer status report. More...
|
| |
| class | ns3::CcHelper |
| | Creation and configuration of Component Carrier entities. More...
|
| |
| class | ns3::ComponentCarrier |
| | ComponentCarrier Object, it defines a single Carrier This is the parent class for both ComponentCarrierBaseStation and ComponentCarrierUe. More...
|
| |
| class | ns3::ComponentCarrierBaseStation |
| | Defines a Base station, that is a ComponentCarrier but with a cell Id. More...
|
| |
| class | ns3::ComponentCarrierEnb |
| | Defines a single carrier for enb, and contains pointers to LteEnbPhy, LteEnbMac, LteFfrAlgorithm, and FfMacScheduler objects. More...
|
| |
| class | ns3::ComponentCarrierUe |
| | ComponentCarrierUe Object, it defines a single Carrier for the Ue. More...
|
| |
| class | ns3::DlCqiLteControlMessage |
| | The downlink CqiLteControlMessage defines an ideal list of feedback about the channel quality sent by the UE to the eNodeB. More...
|
| |
| class | ns3::DlDciLteControlMessage |
| | The Downlink Data Control Indicator messages defines the RB allocation for the users in the downlink. More...
|
| |
| class | ns3::DlHarqFeedbackLteControlMessage |
| | The downlink DlHarqFeedbackLteControlMessage defines the specific messages for transmitting the DL HARQ feedback through PUCCH. More...
|
| |
| class | ns3::DownlinkLteGlobalPathlossDatabase |
| | Store the last pathloss value for each TX-RX pair for downlink. More...
|
| |
| class | ns3::DrbActivator |
| | DrbActivatior allows user to activate bearers for UEs when EPC is not used. More...
|
| |
| class | ns3::EmuEpcHelper |
| | Create an EPC network using EmuFdNetDevice. More...
|
| |
| class | ns3::EpcEnbApplication |
| | This application is installed inside eNBs and provides the bridge functionality for user data plane packets between the radio interface and the S1-U interface. More...
|
| |
| class | ns3::EpcHelper |
| | Base helper class to handle the creation of the EPC entities. More...
|
| |
| class | ns3::EpcMmeApplication |
| | This application implements the Mobility Management Entity (MME) according to the 3GPP TS 23.401 document. More...
|
| |
| class | ns3::EpcPgwApplication |
| | This application implements the Packet Data Network (PDN) Gateway Entity (PGW) according to the 3GPP TS 23.401 document. More...
|
| |
| class | ns3::EpcS11SapMme |
| | MME side of the S11 Service Access Point (SAP), provides the MME methods to be called when an S11 message is received by the MME. More...
|
| |
| class | ns3::EpcS11SapSgw |
| | SGW side of the S11 Service Access Point (SAP), provides the SGW methods to be called when an S11 message is received by the SGW. More...
|
| |
| class | ns3::EpcS1apSap |
| | Base class that defines EPC S1-AP Service Access Point (SAP) interface. More...
|
| |
| class | ns3::EpcS1apSapEnb |
| | eNB side of the S1-AP Service Access Point (SAP), provides the eNB methods to be called when an S1-AP message is received by the eNB. More...
|
| |
| class | ns3::EpcS1apSapMme |
| | MME side of the S1-AP Service Access Point (SAP), provides the MME methods to be called when an S1-AP message is received by the MME. More...
|
| |
| class | ns3::EpcSgwApplication |
| | This application implements the Serving Gateway Entity (SGW) according to the 3GPP TS 23.401 document. More...
|
| |
| class | ns3::EpcX2 |
| | This entity is installed inside an eNB and provides the functionality for the X2 interface. More...
|
| |
| class | ns3::GtpcCreateSessionRequestMessage |
| | GTP-C Create Session Request Message. More...
|
| |
| class | ns3::GtpcCreateSessionResponseMessage |
| | GTP-C Create Session Response Message. More...
|
| |
| class | ns3::GtpcDeleteBearerCommandMessage |
| | GTP-C Delete Bearer Command Message. More...
|
| |
| class | ns3::GtpcDeleteBearerRequestMessage |
| | GTP-C Delete Bearer Request Message. More...
|
| |
| class | ns3::GtpcDeleteBearerResponseMessage |
| | GTP-C Delete Bearer Response Message. More...
|
| |
| class | ns3::GtpcHeader |
| | Header of the GTPv2-C protocol. More...
|
| |
| class | ns3::GtpcIes |
| | GTP-C Information Elements. More...
|
| |
| class | ns3::GtpcModifyBearerRequestMessage |
| | GTP-C Modify Bearer Request Message. More...
|
| |
| class | ns3::GtpcModifyBearerResponseMessage |
| | GTP-C Modify Bearer Response Message. More...
|
| |
| class | ns3::GtpuHeader |
| | Implementation of the GPRS Tunnelling Protocol header according to GTPv1-U Release 10 as per 3Gpp TS 29.281 document. More...
|
| |
| class | LteAggregationThroughputScaleTestCase |
| | Testing that UE throughput scales linearly with number of component carriers. More...
|
| |
| class | ns3::LteAmc |
| | Implements the Adaptive Modulation And Coding Scheme. More...
|
| |
| class | ns3::LteCcmMacSapProvider |
| | Service Access Point (SAP) offered by the component carrier manager (CCM) by MAC to CCM. More...
|
| |
| class | ns3::LteCcmMacSapUser |
| | Service Access Point (SAP) offered by MAC to the component carrier manager (CCM). More...
|
| |
| class | LteCellSelectionTestCase |
| | Testing the initial cell selection procedure by UE at IDLE state in the beginning of simulation. More...
|
| |
| class | ns3::LteControlMessage |
| | The LteControlMessage provides a basic implementations for control messages (such as PDCCH allocation map, CQI feedbacks) that are exchanged among eNodeB and UEs. More...
|
| |
| class | ns3::LteEnbNetDevice |
| | The eNodeB device implementation. More...
|
| |
| class | ns3::LteEnbPhy |
| | LteEnbPhy models the physical layer for the eNodeB. More...
|
| |
| class | ns3::LteEnbRrc |
| | The LTE Radio Resource Control entity at the eNB. More...
|
| |
| class | ns3::LteGlobalPathlossDatabase |
| | Store the last pathloss value for each TX-RX pair. More...
|
| |
| class | ns3::LteHarqPhy |
| | The LteHarqPhy class implements the HARQ functionalities related to PHY layer (i.e., decodification buffers for incremental redundancy management) More...
|
| |
| class | ns3::LteHelper |
| | Creation and configuration of LTE entities. More...
|
| |
| class | ns3::LteHexGridEnbTopologyHelper |
| | This helper class allows to easily create a topology with eNBs grouped in three-sector sites laid out on an hexagonal grid. More...
|
| |
| class | ns3::LteNetDevice |
| | LteNetDevice provides basic implementation for all LTE network devices. More...
|
| |
| class | ns3::LtePdcpHeader |
| | The packet header for the Packet Data Convergence Protocol (PDCP) packets. More...
|
| |
| class | ns3::LtePhy |
| | The LtePhy models the physical layer of LTE. More...
|
| |
| class | LtePrimaryCellChangeTestCase |
| | Testing the handover procedure with multiple component carriers. More...
|
| |
| class | LteRadioLinkFailureTestCase |
| | Testing the cell reselection procedure by UE at IDLE state. More...
|
| |
| class | ns3::LteRlcAmHeader |
| | The packet header for the AM Radio Link Control (RLC) protocol packets. More...
|
| |
| class | ns3::LteRlcHeader |
| | The packet header for the Radio Link Control (RLC) protocol packets. More...
|
| |
| class | ns3::LteRrcSap |
| | Class holding definition common to all UE/eNodeB SAP Users/Providers. More...
|
| |
| class | ns3::LteSimpleNetDevice |
| | The LteSimpleNetDevice class implements the LTE simple net device. More...
|
| |
| class | ns3::LteSimpleSpectrumPhy |
| | The LteSimpleSpectrumPhy models the physical layer of LTE This class is used to test Frequency Reuse Algorithms, it allow to get SpectrumValue from channel and pass it to test script by trace mechanism. More...
|
| |
| class | ns3::LteSpectrumPhy |
| | The LteSpectrumPhy models the physical layer of LTE. More...
|
| |
| struct | ns3::LteSpectrumSignalParameters |
| | Signal parameters for Lte. More...
|
| |
| struct | ns3::LteSpectrumSignalParametersDataFrame |
| | Signal parameters for Lte Data Frame (PDSCH), and eventually after some control messages through other control channel embedded in PDSCH (i.e. More...
|
| |
| struct | ns3::LteSpectrumSignalParametersDlCtrlFrame |
| | Signal parameters for Lte DL Ctrl Frame (RS, PCFICH and PDCCH) More...
|
| |
| struct | ns3::LteSpectrumSignalParametersUlSrsFrame |
| | Signal parameters for Lte SRS Frame. More...
|
| |
| class | ns3::LteSpectrumValueHelper |
| | This class defines all functions to create spectrum model for lte. More...
|
| |
| class | ns3::LteStatsCalculator |
| | Base class for ***StatsCalculator classes. More...
|
| |
| class | ns3::LteUeNetDevice |
| | The LteUeNetDevice class implements the UE net device. More...
|
| |
| class | ns3::LteUePhy |
| | The LteSpectrumPhy models the physical layer of LTE. More...
|
| |
| class | ns3::LteUeRrcProtocolIdeal |
| | Models the transmission of RRC messages from the UE to the eNB in an ideal fashion, without errors and without consuming any radio resources. More...
|
| |
| class | ns3::LteUeRrcProtocolReal |
| | Models the transmission of RRC messages from the UE to the eNB in a real fashion, by creating real RRC PDUs and transmitting them over Signaling Radio Bearers using radio resources allocated by the LTE MAC scheduler. More...
|
| |
| class | ns3::MacStatsCalculator |
| | Takes care of storing the information generated at MAC layer. More...
|
| |
| class | ns3::MibLteControlMessage |
| | Abstract model for broadcasting the Master Information Block (MIB) within the control channel (BCCH). More...
|
| |
| class | ns3::NoBackhaulEpcHelper |
| | Create an EPC network with PointToPoint links between the core network nodes. More...
|
| |
| class | ns3::PhyRxStatsCalculator |
| | Takes care of storing the information generated at PHY layer regarding reception. More...
|
| |
| class | ns3::PhyStatsCalculator |
| | Takes care of storing the information generated at PHY layer. More...
|
| |
| class | ns3::PhyTxStatsCalculator |
| | Takes care of storing the information generated at PHY layer regarding transmission. More...
|
| |
| class | ns3::PointToPointEpcHelper |
| | Create an EPC network with PointToPoint links in the backhaul network. More...
|
| |
| class | ns3::RachPreambleLteControlMessage |
| | abstract model for the Random Access Preamble More...
|
| |
| class | ns3::RadioBearerStatsCalculator |
| | This class is an ns-3 trace sink that performs the calculation of PDU statistics for uplink and downlink. More...
|
| |
| class | ns3::RadioBearerStatsConnector |
| | This class is very useful when user needs to collect statistics from PDCP and RLC. More...
|
| |
| class | ns3::RadioEnvironmentMapHelper |
| | Generates a 2D map of the SINR from the strongest transmitter in the downlink of an LTE FDD system. More...
|
| |
| class | ns3::RarLteControlMessage |
| | abstract model for the MAC Random Access Response message More...
|
| |
| class | ns3::RrcAsn1Header |
| | This class extends Asn1Header functions, adding serialization/deserialization of some Information elements defined in 3GPP TS 36.331. More...
|
| |
| class | ns3::Sib1LteControlMessage |
| | Abstract model for broadcasting the System Information Block Type 1 (SIB1) within the control channel (BCCH). More...
|
| |
| class | ns3::UeManager |
| | Manages all the radio bearer information possessed by the ENB RRC for a single UE. More...
|
| |
| class | ns3::UlDciLteControlMessage |
| | The Uplink Data Control Indicator messages defines the RB allocation for the users in the uplink. More...
|
| |
| class | ns3::UplinkLteGlobalPathlossDatabase |
| | Store the last pathloss value for each TX-RX pair for uplink. More...
|
| |
Collaboration diagram for LTE Models:
1.11.0