A Discrete-Event Network Simulator
API
Loading...
Searching...
No Matches
ns3::StaWifiMac Class Reference

The Wifi MAC high model for a non-AP STA in a BSS. More...

#include "sta-wifi-mac.h"

+ Inheritance diagram for ns3::StaWifiMac:
+ Collaboration diagram for ns3::StaWifiMac:

Classes

struct  ApInfo
 Struct to hold information regarding observed AP through active/passive scanning. More...
 
struct  EdcaParams
 EDCA Parameters. More...
 
struct  MuEdcaParams
 MU EDCA Parameters. More...
 
struct  StaLinkEntity
 Structure holding information specific to a single link. More...
 

Public Types

enum  MacState {
  ASSOCIATED , SCANNING , WAIT_ASSOC_RESP , UNASSOCIATED ,
  REFUSED
}
 The current MAC state of the STA. More...
 
using MgtFrameType
 type of the management frames used to get info about APs
 
- Public Types inherited from ns3::WifiMac
typedef Callback< void, Ptr< const Packet >, Mac48Address, Mac48AddressForwardUpCallback
 This type defines the callback of a higher layer that a WifiMac(-derived) object invokes to pass a packet up the stack.
 
using OriginatorAgreementOptConstRef
 optional const reference to OriginatorBlockAckAgreement
 
using RecipientAgreementOptConstRef
 optional const reference to RecipientBlockAckAgreement
 

Public Member Functions

 StaWifiMac ()
 
 ~StaWifiMac () override
 
int64_t AssignStreams (int64_t stream) override
 Assign a fixed random variable stream number to the random variables used by this model.
 
void BlockTxOnLink (uint8_t linkId, WifiQueueBlockedReason reason)
 Block transmissions on the given link for the given reason.
 
bool CanForwardPacketsTo (Mac48Address to) const override
 Return true if packets can be forwarded to the given destination, false otherwise.
 
uint16_t GetAssociationId () const
 Return the association ID.
 
Ptr< EmlsrManagerGetEmlsrManager () const
 
WifiPowerManagementMode GetPmMode (uint8_t linkId) const
 
std::set< uint8_t > GetSetupLinkIds () const
 Get the IDs of the setup links (if any).
 
bool IsAssociated () const
 Return whether we are associated with an AP.
 
bool IsEmlsrLink (uint8_t linkId) const
 
void NotifyChannelSwitching (uint8_t linkId) override
 Notify that channel on the given link has been switched.
 
void NotifyEmlsrModeChanged (const std::set< uint8_t > &linkIds)
 Notify the MAC that EMLSR mode has changed on the given set of links.
 
void NotifySwitchingEmlsrLink (Ptr< WifiPhy > phy, uint8_t linkId, Time delay)
 Notify that the given PHY switched channel to operate on another EMLSR link.
 
void ScanningTimeout (const std::optional< ApInfo > &bestAp)
 This method is called after wait beacon timeout or wait probe request timeout has occurred.
 
void SendProbeRequest (uint8_t linkId)
 Enqueue a probe request packet for transmission on the given link.
 
void SetAssocManager (Ptr< WifiAssocManager > assocManager)
 Set the Association Manager.
 
void SetEmlsrManager (Ptr< EmlsrManager > emlsrManager)
 Set the EMLSR Manager.
 
void SetPmModeAfterAssociation (uint8_t linkId)
 Set the Power Management mode of the setup links after association.
 
void SetPowerSaveMode (const std::pair< bool, uint8_t > &enableLinkIdPair)
 Enable or disable Power Save mode on the given link.
 
void SetWifiPhys (const std::vector< Ptr< WifiPhy > > &phys) override
 
void TxOk (Ptr< const WifiMpdu > mpdu)
 Notify that the MPDU we sent was successfully received by the receiver (i.e.
 
void UnblockTxOnLink (std::set< uint8_t > linkIds, WifiQueueBlockedReason reason)
 Unblock transmissions on the given links for the given reason.
 
- Public Member Functions inherited from ns3::WifiMac
 WifiMac ()
 
 WifiMac (const WifiMac &)=delete
 
 ~WifiMac () override
 
void BlockUnicastTxOnLinks (WifiQueueBlockedReason reason, const Mac48Address &address, const std::set< uint8_t > &linkIds)
 Block the transmission on the given links of all unicast frames addressed to the station with the given address for the given reason.
 
void Enqueue (Ptr< Packet > packet, Mac48Address to)
 
void Enqueue (Ptr< Packet > packet, Mac48Address to, Mac48Address from)
 
void Enqueue (Ptr< Packet > packet, Mac48Address to, Mac48Address from, uint8_t tid)
 
Mac48Address GetAddress () const
 
OriginatorAgreementOptConstRef GetBaAgreementEstablishedAsOriginator (Mac48Address recipient, uint8_t tid) const
 
RecipientAgreementOptConstRef GetBaAgreementEstablishedAsRecipient (Mac48Address originator, uint8_t tid) const
 
BlockAckReqType GetBarTypeAsOriginator (const Mac48Address &recipient, uint8_t tid) const
 
BlockAckReqType GetBarTypeAsRecipient (Mac48Address originator, uint8_t tid) const
 
BlockAckType GetBaTypeAsOriginator (const Mac48Address &recipient, uint8_t tid) const
 
BlockAckType GetBaTypeAsRecipient (Mac48Address originator, uint8_t tid) const
 
Mac48Address GetBssid (uint8_t linkId) const
 
Ptr< ChannelAccessManagerGetChannelAccessManager (uint8_t linkId=SINGLE_LINK_OP_ID) const
 Get the Channel Access Manager associated with the given link.
 
Ptr< WifiNetDeviceGetDevice () const
 Return the device this PHY is associated with.
 
bool GetDsssSupported (uint8_t linkId) const
 Return whether the device supports DSSS on the given link.
 
EhtCapabilities GetEhtCapabilities (uint8_t linkId) const
 Return the EHT capabilities of the device for the given link.
 
Ptr< EhtConfigurationGetEhtConfiguration () const
 
bool GetEhtSupported () const
 Return whether the device supports EHT.
 
bool GetEhtSupported (const Mac48Address &address) const
 
bool GetErpSupported (uint8_t linkId) const
 Return whether the device supports ERP on the given link.
 
ExtendedCapabilities GetExtendedCapabilities () const
 Return the extended capabilities of the device.
 
Ptr< FrameExchangeManagerGetFrameExchangeManager (uint8_t linkId=SINGLE_LINK_OP_ID) const
 Get the Frame Exchange Manager associated with the given link.
 
He6GhzBandCapabilities GetHe6GhzBandCapabilities (uint8_t linkId) const
 Return the HE 6GHz band capabilities of the device for the given 6 GHz link.
 
HeCapabilities GetHeCapabilities (uint8_t linkId) const
 Return the HE capabilities of the device for the given link.
 
Ptr< HeConfigurationGetHeConfiguration () const
 
bool GetHeSupported () const
 Return whether the device supports HE.
 
bool GetHeSupported (const Mac48Address &address) const
 
HtCapabilities GetHtCapabilities (uint8_t linkId) const
 Return the HT capabilities of the device for the given link.
 
Ptr< HtConfigurationGetHtConfiguration () const
 
bool GetHtSupported (const Mac48Address &address) const
 
bool GetHtSupported (uint8_t linkId) const
 Return whether the device supports HT on the given link.
 
std::optional< uint8_t > GetLinkForPhy (Ptr< const WifiPhy > phy) const
 Get the ID of the link (if any) on which the given PHY is operating.
 
std::optional< uint8_t > GetLinkForPhy (std::size_t phyId) const
 Get the ID of the link (if any) on which the given PHY is operating.
 
virtual std::optional< uint8_t > GetLinkIdByAddress (const Mac48Address &address) const
 Get the ID of the link having the given MAC address, if any.
 
const std::set< uint8_t > & GetLinkIds () const
 
Mac48Address GetLocalAddress (const Mac48Address &remoteAddr) const
 Get the local MAC address used to communicate with a remote STA.
 
Ptr< WifiMacQueueSchedulerGetMacQueueScheduler () const
 Get the wifi MAC queue scheduler.
 
uint32_t GetMaxAmpduSize (AcIndex ac) const
 Return the maximum A-MPDU size of the given Access Category.
 
uint16_t GetMaxAmsduSize (AcIndex ac) const
 Return the maximum A-MSDU size of the given Access Category.
 
uint16_t GetMaxBaBufferSize (std::optional< Mac48Address > address=std::nullopt) const
 Get the maximum Block Ack buffer size (in number of MPDUs) supported by the given device, if any, or by this device, otherwise, based on the supported standard.
 
std::optional< Mac48AddressGetMldAddress (const Mac48Address &remoteAddr) const
 
uint16_t GetMpduBufferSize () const
 
uint8_t GetNLinks () const
 Get the number of links (can be greater than 1 for 11be devices only).
 
bool GetQosSupported () const
 Return whether the device supports QoS.
 
Ptr< QosTxopGetQosTxop (AcIndex ac) const
 Accessor for a specified EDCA object.
 
Ptr< QosTxopGetQosTxop (uint8_t tid) const
 Accessor for a specified EDCA object.
 
Ssid GetSsid () const
 
std::optional< std::reference_wrapper< const WifiTidLinkMapping > > GetTidToLinkMapping (Mac48Address mldAddr, WifiDirection dir) const
 Get the TID-to-Link Mapping negotiated with the given MLD (if any) for the given direction.
 
bool GetTxBlockedOnLink (AcIndex ac, const WifiContainerQueueId &queueId, uint8_t linkId, WifiQueueBlockedReason reason=WifiQueueBlockedReason::REASONS_COUNT) const
 Check whether the transmission of the packets in the given container queue of the given Access Category are blocked on the given link for the given reason (if any).
 
Ptr< TxopGetTxop () const
 Accessor for the Txop object.
 
virtual Ptr< WifiMacQueueGetTxopQueue (AcIndex ac) const
 Get the wifi MAC queue of the (Qos)Txop associated with the given AC, if such (Qos)Txop is installed, or a null pointer, otherwise.
 
TypeOfStation GetTypeOfStation () const
 Return the type of station.
 
VhtCapabilities GetVhtCapabilities (uint8_t linkId) const
 Return the VHT capabilities of the device for the given link.
 
Ptr< VhtConfigurationGetVhtConfiguration () const
 
bool GetVhtSupported (const Mac48Address &address) const
 
bool GetVhtSupported (uint8_t linkId) const
 Return whether the device supports VHT on the given link.
 
Ptr< WifiPhyGetWifiPhy (uint8_t linkId=SINGLE_LINK_OP_ID) const
 
Ptr< WifiRemoteStationManagerGetWifiRemoteStationManager (uint8_t linkId=0) const
 
virtual bool HasFramesToTransmit (uint8_t linkId)
 Check if the MAC has frames to transmit over the given link.
 
bool Is6GhzBand (uint8_t linkId) const
 Indicate if a given link is on the 6 GHz band.
 
void NotifyPromiscRx (Ptr< const Packet > packet)
 
void NotifyRx (Ptr< const Packet > packet)
 
void NotifyRxDrop (Ptr< const Packet > packet)
 
void NotifyTx (Ptr< const Packet > packet)
 
void NotifyTxDrop (Ptr< const Packet > packet)
 
WifiMacoperator= (const WifiMac &)=delete
 
void ResetWifiPhys ()
 Remove currently attached WifiPhy objects from this MAC.
 
virtual void SetAddress (Mac48Address address)
 
void SetBssid (Mac48Address bssid, uint8_t linkId)
 
void SetChannelAccessManagers (const std::vector< Ptr< ChannelAccessManager > > &caManagers)
 
void SetCtsToSelfSupported (bool enable)
 Enable or disable CTS-to-self feature.
 
void SetDevice (const Ptr< WifiNetDevice > device)
 Sets the device this PHY is associated with.
 
void SetForwardUpCallback (ForwardUpCallback upCallback)
 
void SetFrameExchangeManagers (const std::vector< Ptr< FrameExchangeManager > > &feManagers)
 
void SetLinkDownCallback (Callback< void > linkDown)
 
virtual void SetLinkUpCallback (Callback< void > linkUp)
 
virtual void SetMacQueueScheduler (Ptr< WifiMacQueueScheduler > scheduler)
 Set the wifi MAC queue scheduler.
 
void SetMpduBufferSize (uint16_t size)
 
void SetPromisc ()
 Sets the interface in promiscuous mode.
 
void SetSsid (Ssid ssid)
 
void SetTypeOfStation (TypeOfStation type)
 This method is invoked by a subclass to specify what type of station it is implementing.
 
void SetWifiRemoteStationManager (Ptr< WifiRemoteStationManager > stationManager)
 
void SetWifiRemoteStationManagers (const std::vector< Ptr< WifiRemoteStationManager > > &stationManagers)
 
virtual bool SupportsSendFrom () const
 
bool TidMappedOnLink (Mac48Address mldAddr, WifiDirection dir, uint8_t tid, uint8_t linkId) const
 Check whether the given TID is mapped on the given link in the given direction for the given MLD.
 
void UnblockUnicastTxOnLinks (WifiQueueBlockedReason reason, const Mac48Address &address, const std::set< uint8_t > &linkIds)
 Unblock the transmission on the given links of all unicast frames addressed to the station with the given address for the given reason.
 
- Public Member Functions inherited from ns3::Object
 Object ()
 Constructor.
 
 ~Object () override
 Destructor.
 
void AggregateObject (Ptr< Object > other)
 Aggregate two Objects together.
 
void Dispose ()
 Dispose of this Object.
 
AggregateIterator GetAggregateIterator () const
 Get an iterator to the Objects aggregated to this one.
 
TypeId GetInstanceTypeId () const override
 Get the most derived TypeId for this Object.
 
template<typename T >
Ptr< T > GetObject () const
 Get a pointer to the requested aggregated Object.
 
template<>
Ptr< ObjectGetObject () const
 Specialization of () for objects of type ns3::Object.
 
template<typename T >
Ptr< T > GetObject (TypeId tid) const
 Get a pointer to the requested aggregated Object by TypeId.
 
template<>
Ptr< ObjectGetObject (TypeId tid) const
 Specialization of (TypeId tid) for objects of type ns3::Object.
 
void Initialize ()
 Invoke DoInitialize on all Objects aggregated to this one.
 
bool IsInitialized () const
 Check if the object has been initialized.
 
void UnidirectionalAggregateObject (Ptr< Object > other)
 Aggregate an Object to another Object.
 
- Public Member Functions inherited from ns3::SimpleRefCount< Object, ObjectBase, ObjectDeleter >
 SimpleRefCount ()
 Default constructor.
 
 SimpleRefCount (const SimpleRefCount &o)
 Copy constructor.
 
uint32_t GetReferenceCount () const
 Get the reference count of the object.
 
SimpleRefCountoperator= (const SimpleRefCount &o)
 Assignment operator.
 
void Ref () const
 Increment the reference count.
 
void Unref () const
 Decrement the reference count.
 
- Public Member Functions inherited from ns3::ObjectBase
virtual ~ObjectBase ()
 Virtual destructor.
 
void GetAttribute (std::string name, AttributeValue &value, bool permissive=false) const
 Get the value of an attribute, raising fatal errors if unsuccessful.
 
bool GetAttributeFailSafe (std::string name, AttributeValue &value) const
 Get the value of an attribute without raising errors.
 
void SetAttribute (std::string name, const AttributeValue &value)
 Set a single attribute, raising fatal errors if unsuccessful.
 
bool SetAttributeFailSafe (std::string name, const AttributeValue &value)
 Set a single attribute without raising errors.
 
bool TraceConnect (std::string name, std::string context, const CallbackBase &cb)
 Connect a TraceSource to a Callback with a context.
 
bool TraceConnectWithoutContext (std::string name, const CallbackBase &cb)
 Connect a TraceSource to a Callback without a context.
 
bool TraceDisconnect (std::string name, std::string context, const CallbackBase &cb)
 Disconnect from a TraceSource a Callback previously connected with a context.
 
bool TraceDisconnectWithoutContext (std::string name, const CallbackBase &cb)
 Disconnect from a TraceSource a Callback previously connected without a context.
 

Static Public Member Functions

static TypeId GetTypeId ()
 Get the type ID.
 
- Static Public Member Functions inherited from ns3::WifiMac
static TypeId GetTypeId ()
 Get the type ID.
 
- Static Public Member Functions inherited from ns3::Object
static TypeId GetTypeId ()
 Register this type.
 
- Static Public Member Functions inherited from ns3::ObjectBase
static TypeId GetTypeId ()
 Get the type ID.
 

Protected Member Functions

StaLinkEntityGetLink (uint8_t linkId) const
 Get a reference to the link associated with the given ID.
 
StaLinkEntityGetStaLink (const std::unique_ptr< WifiMac::LinkEntity > &link) const
 Cast the given LinkEntity object to StaLinkEntity.
 
- Protected Member Functions inherited from ns3::WifiMac
void ApplyTidLinkMapping (const Mac48Address &mldAddr, WifiDirection dir)
 Apply the TID-to-Link Mapping negotiated with the given MLD for the given direction by properly configuring the queue scheduler.
 
virtual void ConfigureContentionWindow (uint32_t cwMin, uint32_t cwMax)
 
virtual void DeaggregateAmsduAndForward (Ptr< const WifiMpdu > mpdu)
 This method can be called to de-aggregate an A-MSDU and forward the constituent packets up the stack.
 
void DoDispose () override
 Destructor implementation.
 
void DoInitialize () override
 Initialize() implementation.
 
void ForwardUp (Ptr< const Packet > packet, Mac48Address from, Mac48Address to)
 Forward the packet up to the device.
 
Ptr< QosTxopGetBEQueue () const
 Accessor for the AC_BE channel access function.
 
Ptr< QosTxopGetBKQueue () const
 Accessor for the AC_BK channel access function.
 
LinkEntityGetLink (uint8_t linkId) const
 Get a reference to the link associated with the given ID.
 
const std::map< uint8_t, std::unique_ptr< LinkEntity > > & GetLinks () const
 
bool GetShortSlotTimeSupported () const
 
Ptr< QosTxopGetVIQueue () const
 Accessor for the AC_VI channel access function.
 
Ptr< QosTxopGetVOQueue () const
 Accessor for the AC_VO channel access function.
 
void NotifyConstructionCompleted () override
 Notifier called once the ObjectBase is fully constructed.
 
void SetShortSlotTimeSupported (bool enable)
 Enable or disable short slot time feature.
 
void SwapLinks (std::map< uint8_t, uint8_t > links)
 Swap the links based on the information included in the given map.
 
void UpdateTidToLinkMapping (const Mac48Address &mldAddr, WifiDirection dir, const WifiTidLinkMapping &mapping)
 Update the TID-to-Link Mappings for the given MLD in the given direction based on the given negotiated mappings.
 
- Protected Member Functions inherited from ns3::Object
 Object (const Object &o)
 Copy an Object.
 
virtual void NotifyNewAggregate ()
 Notify all Objects aggregated to this one of a new Object being aggregated.
 
- Protected Member Functions inherited from ns3::ObjectBase
void ConstructSelf (const AttributeConstructionList &attributes)
 Complete construction of ObjectBase; invoked by derived classes.
 

Private Types

using LinkSetupCallback = void (*)(uint8_t , Mac48Address )
 TracedCallback signature for link setup completed/canceled events.
 

Private Member Functions

void AssocRequestTimeout ()
 This method is called after the association timeout occurred.
 
bool CheckSupportedRates (std::variant< MgtBeaconHeader, MgtProbeResponseHeader > frame, uint8_t linkId)
 Determine whether the supported rates indicated in a given Beacon frame or Probe Response frame fit with the configured membership selector.
 
std::unique_ptr< LinkEntityCreateLinkEntity () const override
 Create a LinkEntity object.
 
void Disassociated ()
 Set the state to unassociated and try to associate again.
 
void DoCompleteConfig () override
 Allow subclasses to complete the configuration of the MAC layer components.
 
void DoDispose () override
 Destructor implementation.
 
Mac48Address DoGetLocalAddress (const Mac48Address &remoteAddr) const override
 This method is called if this device is an MLD to determine the MAC address of the affiliated STA used to communicate with the single link device having the given MAC address.
 
void DoInitialize () override
 Initialize() implementation.
 
void Enqueue (Ptr< WifiMpdu > mpdu, Mac48Address to, Mac48Address from) override
 
bool GetActiveProbing () const
 Return whether active probing is enabled.
 
std::variant< MgtAssocRequestHeader, MgtReassocRequestHeaderGetAssociationRequest (bool isReassoc, uint8_t linkId) const
 Get the (Re)Association Request frame to send on a given link.
 
CapabilityInformation GetCapabilities (uint8_t linkId) const
 Return the Capability information for the given link.
 
WifiScanParams::Channel GetCurrentChannel (uint8_t linkId) const
 Get the current primary20 channel used on the given link as a (channel number, PHY band) pair.
 
MultiLinkElement GetMultiLinkElement (bool isReassoc, uint8_t linkId) const
 Return the Multi-Link Element to include in the management frames transmitted on the given link.
 
AllSupportedRates GetSupportedRates (uint8_t linkId) const
 Return an instance of SupportedRates that contains all rates that we support including HT rates.
 
std::vector< TidToLinkMappingGetTidToLinkMappingElements (WifiTidToLinkMappingNegSupport apNegSupport)
 
bool IsWaitAssocResp () const
 Return whether we are waiting for an association response from an AP.
 
void MissedBeacons ()
 This method is called after we have not received a beacon from the AP on any link.
 
void NotifyDropPacketToEnqueue (Ptr< Packet > packet, Mac48Address to) override
 Allow subclasses to take actions when a packet to enqueue has been dropped.
 
void PhyCapabilitiesChanged ()
 Indicate that PHY capabilities have changed.
 
void Receive (Ptr< const WifiMpdu > mpdu, uint8_t linkId) override
 This method acts as the MacRxMiddle receive callback and is invoked to notify us that a frame has been received on the given link.
 
void ReceiveAssocResp (Ptr< const WifiMpdu > mpdu, uint8_t linkId)
 Process the (Re)Association Response frame received on the given link.
 
void ReceiveBeacon (Ptr< const WifiMpdu > mpdu, uint8_t linkId)
 Process the Beacon frame received on the given link.
 
void ReceiveProbeResp (Ptr< const WifiMpdu > mpdu, uint8_t linkId)
 Process the Probe Response frame received on the given link.
 
void RestartBeaconWatchdog (Time delay)
 Restarts the beacon timer.
 
void SendAssociationRequest (bool isReassoc)
 Forward an association or reassociation request packet to the DCF.
 
void SetActiveProbing (bool enable)
 Enable or disable active probing.
 
void SetEdcaParameters (const EdcaParams &params, uint8_t linkId)
 Set the EDCA parameters for the given link.
 
void SetMuEdcaParameters (const MuEdcaParams &params, uint8_t linkId)
 Set the MU EDCA parameters for the given link.
 
void SetState (MacState value)
 Set the current MAC state.
 
void StartScanning ()
 Start the scanning process which trigger active or passive scanning based on the active probing flag.
 
void TryToEnsureAssociated ()
 Try to ensure that we are associated with an AP by taking an appropriate action depending on the current association status.
 
void UpdateApInfo (const MgtFrameType &frame, const Mac48Address &apAddr, const Mac48Address &bssid, uint8_t linkId)
 Update associated AP's information from the given management frame (Beacon, Probe Response or Association Response).
 

Private Attributes

bool m_activeProbing
 active probing
 
uint16_t m_aid
 Association AID.
 
TracedCallback< Mac48Addressm_assocLogger
 association logger
 
Ptr< WifiAssocManagerm_assocManager
 Association Manager.
 
EventId m_assocRequestEvent
 association request event
 
Time m_assocRequestTimeout
 association request timeout
 
TracedCallback< Timem_beaconArrival
 beacon arrival logger
 
TracedCallback< ApInfom_beaconInfo
 beacon info logger
 
EventId m_beaconWatchdog
 beacon watchdog
 
Time m_beaconWatchdogEnd {0}
 beacon watchdog end
 
TracedCallback< Mac48Addressm_deAssocLogger
 disassociation logger
 
WifiTidLinkMapping m_dlTidLinkMappingInAssocReq
 store the DL TID-to-Link Mapping included in the Association Request frame
 
std::map< uint8_t, EventIdm_emlsrLinkSwitch
 maps PHY ID to the event scheduled to switch the corresponding PHY to a new EMLSR link
 
Ptr< EmlsrManagerm_emlsrManager
 EMLSR Manager.
 
uint32_t m_maxMissedBeacons
 maximum missed beacons
 
Time m_pmModeSwitchTimeout
 PM mode switch timeout.
 
Ptr< RandomVariableStreamm_probeDelay
 RandomVariable used to randomize the time of the first Probe Response on each channel.
 
Time m_probeRequestTimeout
 probe request timeout
 
TracedCallback< uint8_t, Mac48Addressm_setupCanceled
 link setup canceled logger
 
TracedCallback< uint8_t, Mac48Addressm_setupCompleted
 link setup completed logger
 
MacState m_state
 MAC state.
 
WifiTidLinkMapping m_ulTidLinkMappingInAssocReq
 store the UL TID-to-Link Mapping included in the Association Request frame
 
Time m_waitBeaconTimeout
 wait beacon timeout
 

Friends

class ::AmpduAggregationTest
 Allow test cases to access private members.
 
class ::MultiLinkOperationsTestBase
 Allow test cases to access private members.
 

Additional Inherited Members

- Protected Attributes inherited from ns3::WifiMac
Callback< void > m_linkDown
 Callback when a link is down.
 
Callback< void > m_linkUp
 Callback when a link is up.
 
Ptr< MacRxMiddlem_rxMiddle
 RX middle (defragmentation etc.)
 
Ptr< WifiMacQueueSchedulerm_scheduler
 wifi MAC queue scheduler
 
Ptr< MacTxMiddlem_txMiddle
 TX middle (aggregation etc.)
 
Ptr< Txopm_txop
 TXOP used for transmission of frames to non-QoS peers.
 

Detailed Description

The Wifi MAC high model for a non-AP STA in a BSS.

The state machine is as follows:

┌───────────┐            ┌────────────────┐                           ┌─────────────┐
│   Start   │      ┌─────┤   Associated   ◄───────────────────┐    ┌──►   Refused   │
└─┬─────────┘      │     └────────────────┘                   │    │  └─────────────┘
  │                │                                          │    │
  │                │ ┌─────────────────────────────────────┐  │    │
  │                │ │                                     │  │    │
  │  ┌─────────────▼─▼──┐       ┌──────────────┐       ┌───┴──▼────┴───────────────────┐
  └──►   Unassociated   ├───────►   Scanning   ├───────►   Wait Association Response   │
     └──────────────────┘       └──────┬──▲────┘       └───────────────┬──▲────────────┘
                                       │  │                            │  │
                                       │  │                            │  │
                                       └──┘                            └──┘

Notes:

  1. The state 'Start' is not included in MacState and only used for illustration purpose.
  2. The Unassociated state is a transient state before STA starts the scanning procedure which moves it into the Scanning state.
  3. In Scanning, STA is gathering beacon or probe response frames from APs, resulted in a list of candidate AP. After the timeout, it then tries to associate to the best AP, which is indicated by the Association Manager. STA will restart the scanning procedure if SetActiveProbing() called.
  4. In the case when AP responded to STA's association request with a refusal, STA will try to associate to the next best AP until the list of candidate AP is exhausted which sends STA to Refused state.
    • Note that this behavior is not currently tested since ns-3 does not implement association refusal at present.
  5. The transition from Wait Association Response to Unassociated occurs if an association request fails without explicit refusal (i.e., the AP fails to respond).
  6. The transition from Associated to Wait Association Response occurs when STA's PHY capabilities changed. In this state, STA tries to reassociate with the previously associated AP.
  7. The transition from Associated to Unassociated occurs if the number of missed beacons exceeds the threshold.

Definition at line 132 of file sta-wifi-mac.h.

Member Typedef Documentation

◆ LinkSetupCallback

using ns3::StaWifiMac::LinkSetupCallback = void (*)(uint8_t , Mac48Address )
private

TracedCallback signature for link setup completed/canceled events.

Definition at line 619 of file sta-wifi-mac.h.

◆ MgtFrameType

Initial value:
std::variant<MgtBeaconHeader, MgtProbeResponseHeader, MgtAssocResponseHeader>

type of the management frames used to get info about APs

Definition at line 141 of file sta-wifi-mac.h.

Member Enumeration Documentation

◆ MacState

The current MAC state of the STA.

Enumerator
ASSOCIATED 
SCANNING 
WAIT_ASSOC_RESP 
UNASSOCIATED 
REFUSED 

Definition at line 353 of file sta-wifi-mac.h.

Constructor & Destructor Documentation

◆ StaWifiMac()

ns3::StaWifiMac::StaWifiMac ( )

Definition at line 144 of file sta-wifi-mac.cc.

References NS_LOG_FUNCTION, ns3::WifiMac::SetTypeOfStation(), and ns3::STA.

+ Here is the call graph for this function:

◆ ~StaWifiMac()

ns3::StaWifiMac::~StaWifiMac ( )
override

Definition at line 201 of file sta-wifi-mac.cc.

References NS_LOG_FUNCTION.

Member Function Documentation

◆ AssignStreams()

int64_t ns3::StaWifiMac::AssignStreams ( int64_t stream)
overridevirtual

Assign a fixed random variable stream number to the random variables used by this model.

Return the number of streams (possibly zero) that have been assigned.

Parameters
streamfirst stream index to use
Returns
the number of stream indices assigned by this model

Reimplemented from ns3::WifiMac.

Definition at line 236 of file sta-wifi-mac.cc.

References ns3::WifiMac::AssignStreams(), m_probeDelay, NS_LOG_FUNCTION, and ns3::RandomVariableStream::SetStream().

+ Here is the call graph for this function:

◆ AssocRequestTimeout()

void ns3::StaWifiMac::AssocRequestTimeout ( )
private

This method is called after the association timeout occurred.

We switch the state to WAIT_ASSOC_RESP and re-send an association request.

Definition at line 845 of file sta-wifi-mac.cc.

References NS_LOG_FUNCTION, SendAssociationRequest(), SetState(), and WAIT_ASSOC_RESP.

Referenced by SendAssociationRequest().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ BlockTxOnLink()

void ns3::StaWifiMac::BlockTxOnLink ( uint8_t linkId,
WifiQueueBlockedReason reason )

Block transmissions on the given link for the given reason.

Parameters
linkIdthe ID of the given link
reasonthe reason for blocking transmissions on the given link

Definition at line 1009 of file sta-wifi-mac.cc.

References ns3::WifiMac::BlockUnicastTxOnLinks(), ns3::Mac48Address::GetBroadcast(), ns3::WifiMac::GetBssid(), ns3::WifiMac::GetFrameExchangeManager(), ns3::WifiMac::GetMacQueueScheduler(), ns3::WifiMac::GetWifiRemoteStationManager(), NS_LOG_FUNCTION, ns3::WIFI_MGT_QUEUE, and ns3::wifiAcList.

+ Here is the call graph for this function:

◆ CanForwardPacketsTo()

bool ns3::StaWifiMac::CanForwardPacketsTo ( Mac48Address to) const
overridevirtual

Return true if packets can be forwarded to the given destination, false otherwise.

Parameters
tothe address to which the packet should be sent
Returns
whether packets can be forwarded to the given destination

Implements ns3::WifiMac.

Definition at line 971 of file sta-wifi-mac.cc.

References IsAssociated().

+ Here is the call graph for this function:

◆ CheckSupportedRates()

bool ns3::StaWifiMac::CheckSupportedRates ( std::variant< MgtBeaconHeader, MgtProbeResponseHeader > frame,
uint8_t linkId )
private

Determine whether the supported rates indicated in a given Beacon frame or Probe Response frame fit with the configured membership selector.

Parameters
framethe given Beacon or Probe Response frame
linkIdID of the link the mgt frame was received over
Returns
whether the the supported rates indicated in the given management frame fit with the configured membership selector

Definition at line 1532 of file sta-wifi-mac.cc.

References ns3::WifiPhy::GetBssMembershipSelectorList(), ns3::WifiMac::GetWifiPhy(), NS_ASSERT, NS_LOG_DEBUG, and NS_LOG_FUNCTION.

Referenced by ReceiveBeacon(), and ReceiveProbeResp().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ CreateLinkEntity()

std::unique_ptr< WifiMac::LinkEntity > ns3::StaWifiMac::CreateLinkEntity ( ) const
overrideprivatevirtual

Create a LinkEntity object.

Returns
a unique pointer to the created LinkEntity object

Reimplemented from ns3::WifiMac.

Definition at line 218 of file sta-wifi-mac.cc.

◆ Disassociated()

void ns3::StaWifiMac::Disassociated ( )
private

Set the state to unassociated and try to associate again.

Definition at line 885 of file sta-wifi-mac.cc.

References ns3::StaWifiMac::StaLinkEntity::bssid, ns3::EventId::Cancel(), ns3::WifiMac::GetLinks(), GetStaLink(), ns3::WifiMac::GetWifiRemoteStationManager(), m_aid, m_assocRequestEvent, m_deAssocLogger, NS_LOG_DEBUG, NS_LOG_FUNCTION, SetState(), TryToEnsureAssociated(), and UNASSOCIATED.

Referenced by MissedBeacons(), and NotifyChannelSwitching().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ DoCompleteConfig()

void ns3::StaWifiMac::DoCompleteConfig ( )
overrideprivatevirtual

Allow subclasses to complete the configuration of the MAC layer components.

Implements ns3::WifiMac.

Definition at line 207 of file sta-wifi-mac.cc.

References NS_LOG_FUNCTION.

◆ DoDispose()

void ns3::StaWifiMac::DoDispose ( )
overrideprivatevirtual

Destructor implementation.

This method is called by Dispose() or by the Object's destructor, whichever comes first.

Subclasses are expected to implement their real destruction code in an overridden version of this method and chain up to their parent's implementation once they are done. i.e, for simplicity, the destructor of every subclass should be empty and its content should be moved to the associated DoDispose() method.

It is safe to call GetObject() from within this method.

Reimplemented from ns3::Object.

Definition at line 180 of file sta-wifi-mac.cc.

References ns3::WifiMac::DoDispose(), m_assocManager, m_emlsrLinkSwitch, m_emlsrManager, and NS_LOG_FUNCTION.

+ Here is the call graph for this function:

◆ DoGetLocalAddress()

Mac48Address ns3::StaWifiMac::DoGetLocalAddress ( const Mac48Address & remoteAddr) const
overrideprivatevirtual

This method is called if this device is an MLD to determine the MAC address of the affiliated STA used to communicate with the single link device having the given MAC address.

This method is overridden because its implementation depends on the type of station.

Parameters
remoteAddrthe MAC address of the remote single link device
Returns
the MAC address of the affiliated STA used to communicate with the remote device

Reimplemented from ns3::WifiMac.

Definition at line 955 of file sta-wifi-mac.cc.

References ns3::StaWifiMac::StaLinkEntity::bssid, ns3::WifiMac::GetAddress(), ns3::WifiMac::GetLinks(), and GetStaLink().

+ Here is the call graph for this function:

◆ DoInitialize()

void ns3::StaWifiMac::DoInitialize ( )
overrideprivatevirtual

Initialize() implementation.

This method is called only once by Initialize(). If the user calls Initialize() multiple times, DoInitialize() is called only the first time.

Subclasses are expected to override this method and chain up to their parent's implementation once they are done. It is safe to call GetObject() and AggregateObject() from within this method.

Reimplemented from ns3::Object.

Definition at line 157 of file sta-wifi-mac.cc.

References ns3::WifiMac::DoInitialize(), ns3::WifiMac::GetLinkForPhy(), m_assocManager, m_emlsrManager, ns3::MakeCallback(), NS_ABORT_IF, NS_ASSERT, NS_LOG_FUNCTION, StartScanning(), ns3::ObjectBase::TraceConnectWithoutContext(), and TxOk().

+ Here is the call graph for this function:

◆ Enqueue()

void ns3::StaWifiMac::Enqueue ( Ptr< WifiMpdu > mpdu,
Mac48Address to,
Mac48Address from )
overrideprivatevirtual
Parameters
mpduthe MPDU to send.
tothe address to which the packet should be sent.
fromthe address from which the packet should be sent.

Subclasses need to implement this method to finalize the MAC header of the MPDU (MAC addresses and ToDS/FromDS flags) and enqueue the MPDU in a TX queue.

Implements ns3::WifiMac.

Definition at line 984 of file sta-wifi-mac.cc.

References ns3::WifiMac::GetAddress(), ns3::WifiMac::GetBssid(), ns3::WifiMac::GetFrameExchangeManager(), ns3::WifiMac::GetQosTxop(), GetSetupLinkIds(), ns3::WifiMac::GetTxop(), ns3::WifiMac::GetWifiRemoteStationManager(), NS_ASSERT, NS_LOG_FUNCTION, and ns3::StaticCast().

+ Here is the call graph for this function:

◆ GetActiveProbing()

bool ns3::StaWifiMac::GetActiveProbing ( ) const
private

Return whether active probing is enabled.

Returns
true if active probing is enabled, false otherwise

Definition at line 287 of file sta-wifi-mac.cc.

References m_activeProbing.

Referenced by GetTypeId().

+ Here is the caller graph for this function:

◆ GetAssociationId()

uint16_t ns3::StaWifiMac::GetAssociationId ( ) const

Return the association ID.

Returns
the association ID

Definition at line 268 of file sta-wifi-mac.cc.

References IsAssociated(), m_aid, and NS_ASSERT_MSG.

+ Here is the call graph for this function:

◆ GetAssociationRequest()

std::variant< MgtAssocRequestHeader, MgtReassocRequestHeader > ns3::StaWifiMac::GetAssociationRequest ( bool isReassoc,
uint8_t linkId ) const
private

Get the (Re)Association Request frame to send on a given link.

The returned frame never includes a Multi-Link Element.

Parameters
isReassocwhether a Reassociation Request has to be returned
linkIdthe ID of the given link
Returns
the (Re)Association Request frame

Definition at line 409 of file sta-wifi-mac.cc.

References ns3::WifiMac::GetBssid(), GetCapabilities(), ns3::WifiMac::GetEhtCapabilities(), ns3::WifiMac::GetEhtSupported(), ns3::WifiMac::GetExtendedCapabilities(), ns3::WifiMac::GetHe6GhzBandCapabilities(), ns3::WifiMac::GetHeCapabilities(), ns3::WifiMac::GetHeSupported(), ns3::WifiMac::GetHtCapabilities(), ns3::WifiMac::GetHtSupported(), ns3::WifiMac::GetSsid(), GetSupportedRates(), ns3::WifiMac::GetVhtCapabilities(), ns3::WifiMac::GetVhtSupported(), ns3::WifiMac::Is6GhzBand(), NS_LOG_FUNCTION, and ns3::MgtReassocRequestHeader::SetCurrentApAddress().

Referenced by GetMultiLinkElement(), and SendAssociationRequest().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ GetCapabilities()

CapabilityInformation ns3::StaWifiMac::GetCapabilities ( uint8_t linkId) const
private

Return the Capability information for the given link.

Parameters
linkIdthe ID of the given link
Returns
the Capability information that we support

Definition at line 1921 of file sta-wifi-mac.cc.

References ns3::WifiMac::GetErpSupported(), ns3::WifiMac::GetShortSlotTimeSupported(), ns3::WifiMac::GetWifiPhy(), ns3::CapabilityInformation::SetShortPreamble(), and ns3::CapabilityInformation::SetShortSlotTime().

Referenced by GetAssociationRequest().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ GetCurrentChannel()

WifiScanParams::Channel ns3::StaWifiMac::GetCurrentChannel ( uint8_t linkId) const
private

Get the current primary20 channel used on the given link as a (channel number, PHY band) pair.

Parameters
linkIdthe ID of the given link
Returns
a (channel number, PHY band) pair

Definition at line 305 of file sta-wifi-mac.cc.

References ns3::WifiMac::GetWifiPhy().

Referenced by ReceiveBeacon().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ GetEmlsrManager()

Ptr< EmlsrManager > ns3::StaWifiMac::GetEmlsrManager ( ) const
Returns
the EMLSR Manager

Definition at line 262 of file sta-wifi-mac.cc.

References m_emlsrManager.

◆ GetLink()

StaWifiMac::StaLinkEntity & ns3::StaWifiMac::GetLink ( uint8_t linkId) const
protected

Get a reference to the link associated with the given ID.

Parameters
linkIdthe given link ID
Returns
a reference to the link associated with the given ID

Definition at line 224 of file sta-wifi-mac.cc.

References ns3::WifiMac::GetLink().

Referenced by GetPmMode(), IsEmlsrLink(), NotifySwitchingEmlsrLink(), ReceiveAssocResp(), ReceiveBeacon(), ScanningTimeout(), SendAssociationRequest(), SetPmModeAfterAssociation(), SetPowerSaveMode(), and TxOk().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ GetMultiLinkElement()

MultiLinkElement ns3::StaWifiMac::GetMultiLinkElement ( bool isReassoc,
uint8_t linkId ) const
private

Return the Multi-Link Element to include in the management frames transmitted on the given link.

Parameters
isReassocwhether the Multi-Link Element is included in a Reassociation Request
linkIdthe ID of the given link
Returns
the Multi-Link Element

Definition at line 462 of file sta-wifi-mac.cc.

References ns3::MultiLinkElement::AddPerStaProfileSubelement(), ns3::MultiLinkElement::BASIC_VARIANT, ns3::EnumValue< T >::Get(), ns3::TimeValue::Get(), ns3::WifiMac::GetAddress(), GetAssociationRequest(), ns3::MultiLinkElement::GetCommonInfoBasic(), ns3::WifiMac::GetEhtConfiguration(), ns3::WifiMac::GetLinks(), ns3::WifiMac::GetNLinks(), ns3::MultiLinkElement::GetNPerStaProfileSubelements(), ns3::MultiLinkElement::GetPerStaProfile(), GetStaLink(), m_emlsrManager, ns3::CommonInfoBasicMle::m_mldCapabilities, NS_ASSERT, NS_LOG_FUNCTION, ns3::MultiLinkElement::SetEmlsrPaddingDelay(), ns3::MultiLinkElement::SetEmlsrSupported(), ns3::MultiLinkElement::SetEmlsrTransitionDelay(), ns3::MultiLinkElement::PerStaProfileSubelement::SetLinkId(), and ns3::MultiLinkElement::SetMldMacAddress().

Referenced by SendAssociationRequest().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ GetPmMode()

WifiPowerManagementMode ns3::StaWifiMac::GetPmMode ( uint8_t linkId) const
Parameters
linkIdthe ID of the given link
Returns
the current Power Management mode of the STA operating on the given link

Definition at line 1857 of file sta-wifi-mac.cc.

References GetLink(), and ns3::StaWifiMac::StaLinkEntity::pmMode.

+ Here is the call graph for this function:

◆ GetSetupLinkIds()

std::set< uint8_t > ns3::StaWifiMac::GetSetupLinkIds ( ) const

Get the IDs of the setup links (if any).

Returns
the IDs of the setup links

Definition at line 936 of file sta-wifi-mac.cc.

References ns3::StaWifiMac::StaLinkEntity::bssid, ns3::WifiMac::GetLinks(), GetStaLink(), and IsAssociated().

Referenced by Enqueue(), and Receive().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ GetStaLink()

StaWifiMac::StaLinkEntity & ns3::StaWifiMac::GetStaLink ( const std::unique_ptr< WifiMac::LinkEntity > & link) const
protected

Cast the given LinkEntity object to StaLinkEntity.

Parameters
linkthe given LinkEntity object
Returns
a reference to the object casted to StaLinkEntity

Definition at line 230 of file sta-wifi-mac.cc.

Referenced by Disassociated(), DoGetLocalAddress(), GetMultiLinkElement(), GetSetupLinkIds(), NotifyEmlsrModeChanged(), ReceiveAssocResp(), ScanningTimeout(), SendAssociationRequest(), and SetPmModeAfterAssociation().

+ Here is the caller graph for this function:

◆ GetSupportedRates()

AllSupportedRates ns3::StaWifiMac::GetSupportedRates ( uint8_t linkId) const
private

Return an instance of SupportedRates that contains all rates that we support including HT rates.

Parameters
linkIdthe ID of the link for which the request is made
Returns
SupportedRates all rates that we support

Definition at line 1901 of file sta-wifi-mac.cc.

References ns3::AllSupportedRates::AddBssMembershipSelectorRate(), ns3::AllSupportedRates::AddSupportedRate(), ns3::WifiPhy::GetBssMembershipSelectorList(), ns3::WifiPhy::GetChannelWidth(), ns3::WifiMac::GetHtSupported(), ns3::WifiPhy::GetModeList(), ns3::WifiMac::GetWifiPhy(), and NS_LOG_DEBUG.

Referenced by GetAssociationRequest(), and SendProbeRequest().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ GetTidToLinkMappingElements()

std::vector< TidToLinkMapping > ns3::StaWifiMac::GetTidToLinkMappingElements ( WifiTidToLinkMappingNegSupport apNegSupport)
private
Parameters
apNegSupportthe negotiation type supported by the AP MLD
Returns
the TID-to-Link Mapping element(s) to include in Association Request frame.

Definition at line 542 of file sta-wifi-mac.cc.

References ns3::BOTH_DIRECTIONS, ns3::DOWNLINK, ns3::EnumValue< T >::Get(), ns3::WifiMac::GetEhtConfiguration(), m_dlTidLinkMappingInAssocReq, m_ulTidLinkMappingInAssocReq, ns3::NOT_SUPPORTED, NS_ABORT_MSG_IF, NS_ASSERT, NS_LOG_DEBUG, NS_LOG_FUNCTION, ns3::SAME_LINK_SET, ns3::TidToLinkMappingValidForNegType1(), and ns3::UPLINK.

Referenced by SendAssociationRequest().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ GetTypeId()

◆ IsAssociated()

bool ns3::StaWifiMac::IsAssociated ( ) const

Return whether we are associated with an AP.

Returns
true if we are associated with an AP, false otherwise

Definition at line 924 of file sta-wifi-mac.cc.

References ASSOCIATED, and m_state.

Referenced by CanForwardPacketsTo(), GetAssociationId(), GetSetupLinkIds(), NotifyChannelSwitching(), PhyCapabilitiesChanged(), Receive(), ReceiveBeacon(), and SetPowerSaveMode().

+ Here is the caller graph for this function:

◆ IsEmlsrLink()

bool ns3::StaWifiMac::IsEmlsrLink ( uint8_t linkId) const
Parameters
linkIdthe ID of the given link
Returns
whether the EMLSR mode is enabled on the given link

Definition at line 346 of file sta-wifi-mac.cc.

References ns3::StaWifiMac::StaLinkEntity::emlsrEnabled, and GetLink().

+ Here is the call graph for this function:

◆ IsWaitAssocResp()

bool ns3::StaWifiMac::IsWaitAssocResp ( ) const
private

Return whether we are waiting for an association response from an AP.

Returns
true if we are waiting for an association response from an AP, false otherwise

Definition at line 930 of file sta-wifi-mac.cc.

References m_state, and WAIT_ASSOC_RESP.

Referenced by ReceiveBeacon().

+ Here is the caller graph for this function:

◆ MissedBeacons()

void ns3::StaWifiMac::MissedBeacons ( )
private

This method is called after we have not received a beacon from the AP on any link.

Definition at line 853 of file sta-wifi-mac.cc.

References ns3::EventId::Cancel(), Disassociated(), ns3::WifiMac::GetLinks(), ns3::EventId::IsPending(), m_beaconWatchdog, m_beaconWatchdogEnd, MissedBeacons(), ns3::Simulator::Now(), NS_LOG_DEBUG, NS_LOG_FUNCTION, ns3::Simulator::Schedule(), and ns3::Seconds().

Referenced by MissedBeacons(), and RestartBeaconWatchdog().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ NotifyChannelSwitching()

void ns3::StaWifiMac::NotifyChannelSwitching ( uint8_t linkId)
overridevirtual

Notify that channel on the given link has been switched.

Parameters
linkIdthe ID of the given link

Reimplemented from ns3::WifiMac.

Definition at line 2071 of file sta-wifi-mac.cc.

References Disassociated(), IsAssociated(), ns3::Object::IsInitialized(), m_assocManager, ns3::WifiMac::NotifyChannelSwitching(), and NS_LOG_FUNCTION.

+ Here is the call graph for this function:

◆ NotifyDropPacketToEnqueue()

void ns3::StaWifiMac::NotifyDropPacketToEnqueue ( Ptr< Packet > packet,
Mac48Address to )
overrideprivatevirtual

Allow subclasses to take actions when a packet to enqueue has been dropped.

Parameters
packetthe dropped packet
tothe address to which the packet should have been sent

Reimplemented from ns3::WifiMac.

Definition at line 977 of file sta-wifi-mac.cc.

References NS_LOG_FUNCTION, and TryToEnsureAssociated().

+ Here is the call graph for this function:

◆ NotifyEmlsrModeChanged()

void ns3::StaWifiMac::NotifyEmlsrModeChanged ( const std::set< uint8_t > & linkIds)

Notify the MAC that EMLSR mode has changed on the given set of links.

Parameters
linkIdsthe IDs of the links that are now EMLSR links (EMLSR mode is disabled on other links)

Definition at line 314 of file sta-wifi-mac.cc.

References ns3::WifiMac::GetLinks(), GetStaLink(), ns3::LOG_FUNCTION, NS_LOG_FUNCTION, ns3::WIFI_PM_ACTIVE, and ns3::WIFI_PM_POWERSAVE.

+ Here is the call graph for this function:

◆ NotifySwitchingEmlsrLink()

void ns3::StaWifiMac::NotifySwitchingEmlsrLink ( Ptr< WifiPhy > phy,
uint8_t linkId,
Time delay )

Notify that the given PHY switched channel to operate on another EMLSR link.

Initial configuration:

Parameters
phythe given PHY
linkIdthe ID of the EMLSR link on which the given PHY is operating
delaythe delay after which the channel switch will be completed
   ┌───┬───┬───┐        ┌────┐       ┌───────┐

Link A │FEM│RSM│CAM│◄──────►│Main├──────►│Channel│ │ │ │ │ │PHY │ │ A │ └───┴───┴───┘ └────┘ └───────┘

┌───┬───┬───┐ ┌────┐ ┌───────┐ Link B │FEM│RSM│CAM│ │Aux │ │Channel│ │ │ │ │◄──────►│PHY ├──────►│ B │ └───┴───┴───┘ └────┘ └───────┘

A link switching/swapping is notified by the EMLSR Manager and the Channel Access Manager (CAM) notifies us that a first PHY (i.e., the Main PHY) switches to Channel B. We connect the Main PHY to the MAC stack B:

   ┌───┬───┬───┐        ┌────┐       ┌───────┐

Link A │FEM│RSM│CAM│ ┌───►│Main├───┐ │Channel│ │ │ │ │ │ │PHY │ │ │ A │ └───┴───┴───┘ │ └────┘ │ └───────┘ │ │ ┌───┬───┬───┐ │ ┌────┐ │ ┌───────┐ Link B │FEM│RSM│CAM│◄──┘ │Aux │ └──►│Channel│ │ │ │ │◄─ ─ ─ ─│PHY ├──────►│ B │ └───┴───┴───┘INACTIVE└────┘ └───────┘

MAC stack B keeps a PHY listener associated with the Aux PHY, even though it is inactive, meaning that the PHY listener will only notify channel switches (no CCA, no RX). If the EMLSR Manager requested a link switching, this configuration will be kept until further requests. If the EMLSR Manager requested a link swapping, link B's CAM will be notified by its (inactive) PHY listener upon the channel switch performed by the Aux PHY. In this case, we remove the inactive PHY listener and connect the Aux PHY to MAC stack A:

   ┌───┬───┬───┐        ┌────┐       ┌───────┐

Link A │FEM│RSM│CAM│◄─┐ ┌──►│Main├───┐ │Channel│ │ │ │ │ │ │ │PHY │ ┌─┼──►│ A │ └───┴───┴───┘ │ │ └────┘ │ │ └───────┘ │ │ │ │ ┌───┬───┬───┐ │ │ ┌────┐ │ │ ┌───────┐ Link B │FEM│RSM│CAM│◄─┼─┘ │Aux │ │ └──►│Channel│ │ │ │ │ └────►│PHY ├─┘ │ B │ └───┴───┴───┘ └────┘ └───────┘

Definition at line 2015 of file sta-wifi-mac.cc.

References ns3::Time::As(), GetLink(), ns3::WifiMac::GetLinks(), m_emlsrLinkSwitch, m_emlsrManager, NS_ASSERT, NS_LOG_FUNCTION, ns3::WifiMac::LinkEntity::phy, ns3::Simulator::Schedule(), and ns3::Time::US.

+ Here is the call graph for this function:

◆ PhyCapabilitiesChanged()

void ns3::StaWifiMac::PhyCapabilitiesChanged ( )
private

Indicate that PHY capabilities have changed.

Definition at line 1957 of file sta-wifi-mac.cc.

References IsAssociated(), NS_LOG_DEBUG, NS_LOG_FUNCTION, SendAssociationRequest(), SetState(), and WAIT_ASSOC_RESP.

Referenced by SetWifiPhys().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ Receive()

void ns3::StaWifiMac::Receive ( Ptr< const WifiMpdu > mpdu,
uint8_t linkId )
overrideprivatevirtual

This method acts as the MacRxMiddle receive callback and is invoked to notify us that a frame has been received on the given link.

The implementation is intended to capture logic that is going to be common to all (or most) derived classes. Specifically, handling of Block Ack management frames is dealt with here.

This method will need, however, to be overridden by derived classes so that they can perform their data handling before invoking the base version.

The given link may be undefined in some cases (e.g., in case of QoS Data frames received in the context of a Block Ack agreement – because the BlockAckManager does not have to record the link each buffered MPDU has been received on); in such a cases, the value of linkId should be WIFI_LINKID_UNDEFINED.

Parameters
mpduthe MPDU that has been received.
linkIdthe ID of the given link

Reimplemented from ns3::WifiMac.

Definition at line 1057 of file sta-wifi-mac.cc.

References ns3::Mac48Address::ConvertFrom(), ns3::WifiMac::DeaggregateAmsduAndForward(), ns3::WifiMac::ForwardUp(), ns3::WifiMacHeader::GetAddr1(), ns3::WifiMacHeader::GetAddr3(), ns3::WifiMac::GetAddress(), ns3::WifiMac::GetBssid(), ns3::WifiMac::GetDevice(), ns3::WifiMac::GetFrameExchangeManager(), GetSetupLinkIds(), ns3::WifiMacHeader::GetType(), ns3::WifiMacHeader::HasData(), IsAssociated(), ns3::WifiMacHeader::IsCtl(), ns3::WifiMacHeader::IsData(), ns3::WifiMacHeader::IsFromDs(), ns3::Mac48Address::IsGroup(), ns3::WifiMacHeader::IsQosAmsdu(), ns3::WifiMacHeader::IsQosData(), ns3::WifiMacHeader::IsToDs(), m_emlsrManager, ns3::WifiMac::NotifyRxDrop(), NS_ASSERT, NS_LOG_FUNCTION, NS_LOG_LOGIC, ns3::WifiActionHeader::Peek(), ns3::WifiActionHeader::PROTECTED_EHT, ns3::WifiActionHeader::PROTECTED_EHT_EML_OPERATING_MODE_NOTIFICATION, ns3::WifiMac::Receive(), ReceiveAssocResp(), ReceiveBeacon(), ReceiveProbeResp(), ns3::WIFI_MAC_MGT_ACTION, ns3::WIFI_MAC_MGT_ASSOCIATION_REQUEST, ns3::WIFI_MAC_MGT_ASSOCIATION_RESPONSE, ns3::WIFI_MAC_MGT_BEACON, ns3::WIFI_MAC_MGT_PROBE_REQUEST, ns3::WIFI_MAC_MGT_PROBE_RESPONSE, ns3::WIFI_MAC_MGT_REASSOCIATION_REQUEST, and ns3::WIFI_MAC_MGT_REASSOCIATION_RESPONSE.

+ Here is the call graph for this function:

◆ ReceiveAssocResp()

void ns3::StaWifiMac::ReceiveAssocResp ( Ptr< const WifiMpdu > mpdu,
uint8_t linkId )
private

Process the (Re)Association Response frame received on the given link.

Parameters
mpduthe MPDU containing the (Re)Association Response frame
linkIdthe ID of the given link

Definition at line 1259 of file sta-wifi-mac.cc.

References ns3::WifiMac::ApplyTidLinkMapping(), ASSOCIATED, ns3::StaWifiMac::StaLinkEntity::bssid, ns3::EventId::Cancel(), ns3::Txop::CHECK_MEDIUM_BUSY, ns3::Txop::DIDNT_HAVE_FRAMES_TO_TRANSMIT, ns3::DOWNLINK, ns3::WifiMacHeader::GetAddr2(), ns3::WifiMacHeader::GetAddr3(), ns3::MgtAssocResponseHeader::GetAssociationId(), GetLink(), ns3::WifiMac::GetLinks(), ns3::WifiMac::GetMldAddress(), ns3::WifiMac::GetNLinks(), ns3::WifiMac::GetQosTxop(), GetStaLink(), ns3::MgtAssocResponseHeader::GetStatusCode(), ns3::WifiMac::GetTxop(), ns3::WifiMac::GetWifiRemoteStationManager(), ns3::WifiMacHeader::IsAssocResp(), ns3::Callback< R, UArgs >::IsNull(), ns3::EventId::IsPending(), ns3::WifiMacHeader::IsReassocResp(), ns3::StatusCode::IsSuccess(), m_aid, m_assocLogger, m_assocRequestEvent, m_dlTidLinkMappingInAssocReq, ns3::WifiMac::m_linkUp, m_setupCompleted, m_state, m_ulTidLinkMappingInAssocReq, ns3::NOT_SUPPORTED, NS_ABORT_MSG_IF, NS_ASSERT, NS_LOG_DEBUG, NS_LOG_FUNCTION, ns3::WifiMac::LinkEntity::phy, REFUSED, ns3::WifiMac::SetBssid(), ns3::WifiPhy::SetOffMode(), SetPmModeAfterAssociation(), SetState(), StartScanning(), UpdateApInfo(), ns3::WifiMac::UpdateTidToLinkMapping(), ns3::UPLINK, WAIT_ASSOC_RESP, and ns3::wifiAcList.

Referenced by Receive().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ ReceiveBeacon()

void ns3::StaWifiMac::ReceiveBeacon ( Ptr< const WifiMpdu > mpdu,
uint8_t linkId )
private

Process the Beacon frame received on the given link.

Parameters
mpduthe MPDU containing the Beacon frame
linkIdthe ID of the given link

Definition at line 1172 of file sta-wifi-mac.cc.

References ASSOCIATED, ns3::StaWifiMac::StaLinkEntity::bssid, ns3::MgtProbeResponseHeader::Capabilities(), CheckSupportedRates(), ns3::SnrTag::Get(), ns3::WifiMacHeader::GetAddr2(), ns3::WifiMacHeader::GetAddr3(), GetCurrentChannel(), GetLink(), IsAssociated(), ns3::WifiMacHeader::IsBeacon(), IsWaitAssocResp(), m_assocManager, m_beaconArrival, m_beaconInfo, ns3::StaWifiMac::ApInfo::m_bssid, ns3::StaWifiMac::ApInfo::m_frame, m_maxMissedBeacons, m_state, ns3::MicroSeconds(), ns3::Simulator::Now(), NS_ASSERT, NS_LOG_DEBUG, NS_LOG_FUNCTION, NS_LOG_LOGIC, RestartBeaconWatchdog(), and UpdateApInfo().

Referenced by Receive().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ ReceiveProbeResp()

void ns3::StaWifiMac::ReceiveProbeResp ( Ptr< const WifiMpdu > mpdu,
uint8_t linkId )
private

Process the Probe Response frame received on the given link.

Parameters
mpduthe MPDU containing the Probe Response frame
linkIdthe ID of the given link

Definition at line 1234 of file sta-wifi-mac.cc.

References CheckSupportedRates(), ns3::SnrTag::Get(), ns3::WifiMacHeader::GetAddr2(), ns3::WifiMacHeader::GetAddr3(), ns3::WifiMacHeader::IsProbeResp(), m_assocManager, ns3::StaWifiMac::ApInfo::m_bssid, NS_ASSERT, NS_LOG_DEBUG, and NS_LOG_FUNCTION.

Referenced by Receive().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ RestartBeaconWatchdog()

void ns3::StaWifiMac::RestartBeaconWatchdog ( Time delay)
private

Restarts the beacon timer.

Parameters
delaythe delay before the watchdog fires

Definition at line 911 of file sta-wifi-mac.cc.

References ns3::Simulator::GetDelayLeft(), ns3::EventId::IsExpired(), m_beaconWatchdog, m_beaconWatchdogEnd, MissedBeacons(), ns3::Simulator::Now(), NS_LOG_DEBUG, NS_LOG_FUNCTION, and ns3::Simulator::Schedule().

Referenced by ReceiveBeacon(), and ScanningTimeout().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ ScanningTimeout()

void ns3::StaWifiMac::ScanningTimeout ( const std::optional< ApInfo > & bestAp)

This method is called after wait beacon timeout or wait probe request timeout has occurred.

This will trigger association process from beacons or probe responses gathered while scanning.

Parameters
bestApthe info about the best AP to associate with, if one was found

Definition at line 776 of file sta-wifi-mac.cc.

References ns3::StaWifiMac::StaLinkEntity::bssid, GetLink(), ns3::WifiMac::GetLinks(), GetStaLink(), ns3::WifiMac::GetWifiRemoteStationManager(), m_maxMissedBeacons, ns3::MicroSeconds(), NS_ABORT_MSG, NS_ASSERT_MSG, NS_LOG_DEBUG, NS_LOG_FUNCTION, RestartBeaconWatchdog(), ns3::Seconds(), SendAssociationRequest(), ns3::StaWifiMac::StaLinkEntity::sendAssocReq, SetState(), StartScanning(), ns3::WifiMac::SwapLinks(), UpdateApInfo(), and WAIT_ASSOC_RESP.

+ Here is the call graph for this function:

◆ SendAssociationRequest()

void ns3::StaWifiMac::SendAssociationRequest ( bool isReassoc)
private

Forward an association or reassociation request packet to the DCF.

The standard is not clear on the correct queue for management frames if QoS is supported. We always use the DCF.

Parameters
isReassocflag whether it is a reassociation request

Definition at line 613 of file sta-wifi-mac.cc.

References AssocRequestTimeout(), ns3::EventId::Cancel(), ns3::Create(), GetAssociationRequest(), ns3::WifiMac::GetBEQueue(), GetLink(), ns3::WifiMac::GetLinks(), ns3::WifiMac::GetMldAddress(), GetMultiLinkElement(), ns3::WifiMac::GetNLinks(), ns3::WifiMac::GetQosSupported(), GetStaLink(), GetTidToLinkMappingElements(), ns3::WifiMac::GetTxop(), ns3::WifiMac::GetVOQueue(), ns3::WifiMac::GetWifiRemoteStationManager(), ns3::EventId::IsPending(), m_assocRequestEvent, m_assocRequestTimeout, ns3::NOT_SUPPORTED, NS_ABORT_MSG_IF, NS_LOG_FUNCTION, ns3::Txop::Queue(), ns3::Simulator::Schedule(), ns3::StaWifiMac::StaLinkEntity::sendAssocReq, ns3::WifiMacHeader::SetAddr1(), ns3::WifiMacHeader::SetAddr2(), ns3::WifiMacHeader::SetAddr3(), ns3::WifiMacHeader::SetDsNotFrom(), ns3::WifiMacHeader::SetDsNotTo(), ns3::WifiMacHeader::SetType(), ns3::WIFI_MAC_MGT_ASSOCIATION_REQUEST, and ns3::WIFI_MAC_MGT_REASSOCIATION_REQUEST.

Referenced by AssocRequestTimeout(), PhyCapabilitiesChanged(), and ScanningTimeout().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ SendProbeRequest()

◆ SetActiveProbing()

void ns3::StaWifiMac::SetActiveProbing ( bool enable)
private

Enable or disable active probing.

Parameters
enableenable or disable active probing

Definition at line 275 of file sta-wifi-mac.cc.

References m_activeProbing, m_state, NS_LOG_DEBUG, NS_LOG_FUNCTION, SCANNING, and StartScanning().

Referenced by GetTypeId().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ SetAssocManager()

void ns3::StaWifiMac::SetAssocManager ( Ptr< WifiAssocManager > assocManager)

Set the Association Manager.

Parameters
assocManagerthe Association Manager

Definition at line 246 of file sta-wifi-mac.cc.

References m_assocManager, and NS_LOG_FUNCTION.

◆ SetEdcaParameters()

void ns3::StaWifiMac::SetEdcaParameters ( const EdcaParams & params,
uint8_t linkId )
private

Set the EDCA parameters for the given link.

Parameters
paramsthe EDCA parameters
linkIdthe ID of the given link

Definition at line 1937 of file sta-wifi-mac.cc.

References ns3::WifiMac::GetQosTxop().

Referenced by UpdateApInfo().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ SetEmlsrManager()

void ns3::StaWifiMac::SetEmlsrManager ( Ptr< EmlsrManager > emlsrManager)

Set the EMLSR Manager.

Parameters
emlsrManagerthe EMLSR Manager

Definition at line 254 of file sta-wifi-mac.cc.

References m_emlsrManager, and NS_LOG_FUNCTION.

◆ SetMuEdcaParameters()

void ns3::StaWifiMac::SetMuEdcaParameters ( const MuEdcaParams & params,
uint8_t linkId )
private

Set the MU EDCA parameters for the given link.

Parameters
paramsthe MU EDCA parameters
linkIdthe ID of the given link

Definition at line 1947 of file sta-wifi-mac.cc.

References ns3::WifiMac::GetQosTxop().

Referenced by UpdateApInfo().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ SetPmModeAfterAssociation()

void ns3::StaWifiMac::SetPmModeAfterAssociation ( uint8_t linkId)

Set the Power Management mode of the setup links after association.

Parameters
linkIdthe ID of the link used to establish association

When a link becomes enabled for a non-AP STA that is affiliated with a non-AP MLD after successful association with an AP MLD with (Re)Association Request/Response frames transmitted on that link [..], the power management mode of the non-AP STA, immediately after the acknowledgement of the (Re)Association Response frame [..], is active mode. (Sec. 35.3.7.1.4 of 802.11be D3.0)

When a link becomes enabled for a non-AP STA that is affiliated with a non-AP MLD after successful association with an AP MLD with (Re)Association Request/Response frames transmitted on another link [..], the power management mode of the non-AP STA, immediately after the acknowledgement of the (Re)Association Response frame [..], is power save mode, and its power state is doze. (Sec. 35.3.7.1.4 of 802.11be D3.0)

Definition at line 1452 of file sta-wifi-mac.cc.

References ns3::WifiPhy::CalculateTxDuration(), GetLink(), ns3::WifiMac::GetLinks(), GetStaLink(), ns3::NanoSeconds(), NS_ASSERT_MSG, NS_LOG_FUNCTION, ns3::WifiMac::LinkEntity::phy, ns3::Simulator::Schedule(), SetPowerSaveMode(), ns3::WIFI_PM_ACTIVE, and ns3::WIFI_PM_POWERSAVE.

Referenced by ReceiveAssocResp().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ SetPowerSaveMode()

void ns3::StaWifiMac::SetPowerSaveMode ( const std::pair< bool, uint8_t > & enableLinkIdPair)

Enable or disable Power Save mode on the given link.

Parameters
enableLinkIdPaira pair indicating whether to enable or not power save mode on the link with the given ID

Definition at line 1796 of file sta-wifi-mac.cc.

References ns3::AC_BE, ns3::Create(), ns3::WifiMac::GetAddress(), ns3::WifiMac::GetBssid(), ns3::WifiMac::GetFrameExchangeManager(), GetLink(), ns3::WifiMac::GetQosSupported(), ns3::WifiMac::GetQosTxop(), ns3::WifiMac::HasFramesToTransmit(), IsAssociated(), m_pmModeSwitchTimeout, ns3::WifiMac::m_txop, NS_LOG_DEBUG, NS_LOG_FUNCTION, ns3::Txop::Queue(), ns3::Simulator::Schedule(), ns3::WifiMacHeader::SetAddr1(), ns3::WifiMacHeader::SetAddr2(), ns3::WifiMacHeader::SetAddr3(), ns3::WifiMacHeader::SetDsNotFrom(), ns3::WifiMacHeader::SetDsTo(), ns3::WifiMacHeader::SetNoPowerManagement(), ns3::WifiMacHeader::SetPowerManagement(), SetPowerSaveMode(), ns3::WIFI_MAC_DATA_NULL, ns3::WIFI_PM_ACTIVE, ns3::WIFI_PM_POWERSAVE, ns3::WIFI_PM_SWITCHING_TO_ACTIVE, and ns3::WIFI_PM_SWITCHING_TO_PS.

Referenced by GetTypeId(), SetPmModeAfterAssociation(), and SetPowerSaveMode().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ SetState()

void ns3::StaWifiMac::SetState ( MacState value)
private

Set the current MAC state.

Parameters
valuethe new state

Definition at line 1931 of file sta-wifi-mac.cc.

References m_state.

Referenced by AssocRequestTimeout(), Disassociated(), PhyCapabilitiesChanged(), ReceiveAssocResp(), ScanningTimeout(), and StartScanning().

+ Here is the caller graph for this function:

◆ SetWifiPhys()

void ns3::StaWifiMac::SetWifiPhys ( const std::vector< Ptr< WifiPhy > > & phys)
overridevirtual
Parameters
physthe physical layers attached to this MAC.

Reimplemented from ns3::WifiMac.

Definition at line 293 of file sta-wifi-mac.cc.

References ns3::MakeCallback(), NS_LOG_FUNCTION, PhyCapabilitiesChanged(), and ns3::WifiMac::SetWifiPhys().

+ Here is the call graph for this function:

◆ StartScanning()

void ns3::StaWifiMac::StartScanning ( )
private

Start the scanning process which trigger active or passive scanning based on the active probing flag.

Definition at line 744 of file sta-wifi-mac.cc.

References ns3::ACTIVE, ns3::WifiScanParams::channelList, ns3::WifiMac::GetLinks(), ns3::WifiMac::GetSsid(), ns3::RandomVariableStream::GetValue(), m_activeProbing, m_assocManager, m_probeDelay, m_probeRequestTimeout, m_waitBeaconTimeout, ns3::WifiScanParams::maxChannelTime, ns3::MicroSeconds(), ns3::WifiScanParams::minChannelTime, NS_ASSERT, NS_LOG_FUNCTION, ns3::PASSIVE, ns3::WifiScanParams::probeDelay, SCANNING, SetState(), ns3::WifiScanParams::ssid, ns3::WifiScanParams::type, and ns3::WIFI_PHY_BAND_UNSPECIFIED.

Referenced by DoInitialize(), ReceiveAssocResp(), ScanningTimeout(), SetActiveProbing(), and TryToEnsureAssociated().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ TryToEnsureAssociated()

void ns3::StaWifiMac::TryToEnsureAssociated ( )
private

Try to ensure that we are associated with an AP by taking an appropriate action depending on the current association status.

Definition at line 708 of file sta-wifi-mac.cc.

References ASSOCIATED, ns3::WifiMac::m_linkDown, m_state, NS_LOG_FUNCTION, REFUSED, SCANNING, StartScanning(), UNASSOCIATED, and WAIT_ASSOC_RESP.

Referenced by Disassociated(), and NotifyDropPacketToEnqueue().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ TxOk()

void ns3::StaWifiMac::TxOk ( Ptr< const WifiMpdu > mpdu)

Notify that the MPDU we sent was successfully received by the receiver (i.e.

we received an Ack from the receiver).

Parameters
mpduthe MPDU that we successfully sent

Definition at line 1863 of file sta-wifi-mac.cc.

References GetLink(), ns3::WifiMac::GetLinkIdByAddress(), ns3::WifiMac::GetTxopQueue(), ns3::WifiMacHeader::IsPowerManagement(), NS_ASSERT_MSG, NS_LOG_FUNCTION, ns3::WIFI_PM_ACTIVE, ns3::WIFI_PM_POWERSAVE, ns3::WIFI_PM_SWITCHING_TO_ACTIVE, and ns3::WIFI_PM_SWITCHING_TO_PS.

Referenced by DoInitialize().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ UnblockTxOnLink()

void ns3::StaWifiMac::UnblockTxOnLink ( std::set< uint8_t > linkIds,
WifiQueueBlockedReason reason )

Unblock transmissions on the given links for the given reason.

Parameters
linkIdsthe IDs of the given links
reasonthe reason for unblocking transmissions on the given links

Definition at line 1031 of file sta-wifi-mac.cc.

References ns3::Mac48Address::GetBroadcast(), ns3::WifiMac::GetBssid(), ns3::WifiMac::GetFrameExchangeManager(), ns3::WifiMac::GetMacQueueScheduler(), ns3::WifiMac::GetWifiRemoteStationManager(), NS_LOG_FUNCTION, ns3::WifiMac::UnblockUnicastTxOnLinks(), ns3::WIFI_MGT_QUEUE, and ns3::wifiAcList.

+ Here is the call graph for this function:

◆ UpdateApInfo()

void ns3::StaWifiMac::UpdateApInfo ( const MgtFrameType & frame,
const Mac48Address & apAddr,
const Mac48Address & bssid,
uint8_t linkId )
private

Update associated AP's information from the given management frame (Beacon, Probe Response or Association Response).

If STA is not associated, this information will be used for the association process.

Parameters
framethe body of the given management frame
apAddrMAC address of the AP
bssidMAC address of BSSID
linkIdID of the link the management frame was received over

Definition at line 1559 of file sta-wifi-mac.cc.

References ns3::AC_BE, ns3::AC_BK, ns3::AC_VI, ns3::AC_VO, ns3::WifiMac::GetEhtSupported(), ns3::WifiMac::GetErpSupported(), ns3::WifiMac::GetHeConfiguration(), ns3::WifiMac::GetHeSupported(), ns3::WifiMac::GetHtSupported(), ns3::WifiPhy::GetMcsList(), ns3::WifiPhy::GetModeList(), ns3::WifiMac::GetQosSupported(), ns3::WifiMac::GetVhtSupported(), ns3::WifiMac::GetWifiPhy(), ns3::WifiMac::GetWifiRemoteStationManager(), ns3::WifiMac::Is6GhzBand(), m_emlsrManager, ns3::MicroSeconds(), NS_ASSERT, NS_LOG_FUNCTION, SetEdcaParameters(), SetMuEdcaParameters(), ns3::WifiPhy::SetSlot(), ns3::WIFI_MOD_CLASS_HE, and ns3::WIFI_MOD_CLASS_VHT.

Referenced by ReceiveAssocResp(), ReceiveBeacon(), and ScanningTimeout().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

Friends And Related Symbol Documentation

◆ ::AmpduAggregationTest

friend class ::AmpduAggregationTest
friend

Allow test cases to access private members.

Definition at line 136 of file sta-wifi-mac.h.

◆ ::MultiLinkOperationsTestBase

friend class ::MultiLinkOperationsTestBase
friend

Allow test cases to access private members.

Definition at line 138 of file sta-wifi-mac.h.

Member Data Documentation

◆ m_activeProbing

bool ns3::StaWifiMac::m_activeProbing
private

active probing

Definition at line 599 of file sta-wifi-mac.h.

Referenced by GetActiveProbing(), SetActiveProbing(), and StartScanning().

◆ m_aid

uint16_t ns3::StaWifiMac::m_aid
private

Association AID.

Definition at line 589 of file sta-wifi-mac.h.

Referenced by Disassociated(), GetAssociationId(), and ReceiveAssocResp().

◆ m_assocLogger

TracedCallback<Mac48Address> ns3::StaWifiMac::m_assocLogger
private

association logger

Definition at line 611 of file sta-wifi-mac.h.

Referenced by GetTypeId(), and ReceiveAssocResp().

◆ m_assocManager

Ptr<WifiAssocManager> ns3::StaWifiMac::m_assocManager
private

◆ m_assocRequestEvent

EventId ns3::StaWifiMac::m_assocRequestEvent
private

association request event

Definition at line 595 of file sta-wifi-mac.h.

Referenced by Disassociated(), ReceiveAssocResp(), and SendAssociationRequest().

◆ m_assocRequestTimeout

Time ns3::StaWifiMac::m_assocRequestTimeout
private

association request timeout

Definition at line 594 of file sta-wifi-mac.h.

Referenced by GetTypeId(), and SendAssociationRequest().

◆ m_beaconArrival

TracedCallback<Time> ns3::StaWifiMac::m_beaconArrival
private

beacon arrival logger

Definition at line 615 of file sta-wifi-mac.h.

Referenced by GetTypeId(), and ReceiveBeacon().

◆ m_beaconInfo

TracedCallback<ApInfo> ns3::StaWifiMac::m_beaconInfo
private

beacon info logger

Definition at line 616 of file sta-wifi-mac.h.

Referenced by GetTypeId(), and ReceiveBeacon().

◆ m_beaconWatchdog

EventId ns3::StaWifiMac::m_beaconWatchdog
private

beacon watchdog

Definition at line 597 of file sta-wifi-mac.h.

Referenced by MissedBeacons(), and RestartBeaconWatchdog().

◆ m_beaconWatchdogEnd

Time ns3::StaWifiMac::m_beaconWatchdogEnd {0}
private

beacon watchdog end

Definition at line 598 of file sta-wifi-mac.h.

Referenced by MissedBeacons(), and RestartBeaconWatchdog().

◆ m_deAssocLogger

TracedCallback<Mac48Address> ns3::StaWifiMac::m_deAssocLogger
private

disassociation logger

Definition at line 613 of file sta-wifi-mac.h.

Referenced by Disassociated(), and GetTypeId().

◆ m_dlTidLinkMappingInAssocReq

WifiTidLinkMapping ns3::StaWifiMac::m_dlTidLinkMappingInAssocReq
private

store the DL TID-to-Link Mapping included in the Association Request frame

Definition at line 607 of file sta-wifi-mac.h.

Referenced by GetTidToLinkMappingElements(), and ReceiveAssocResp().

◆ m_emlsrLinkSwitch

std::map<uint8_t, EventId> ns3::StaWifiMac::m_emlsrLinkSwitch
private

maps PHY ID to the event scheduled to switch the corresponding PHY to a new EMLSR link

Definition at line 603 of file sta-wifi-mac.h.

Referenced by DoDispose(), and NotifySwitchingEmlsrLink().

◆ m_emlsrManager

Ptr<EmlsrManager> ns3::StaWifiMac::m_emlsrManager
private

◆ m_maxMissedBeacons

uint32_t ns3::StaWifiMac::m_maxMissedBeacons
private

maximum missed beacons

Definition at line 596 of file sta-wifi-mac.h.

Referenced by GetTypeId(), ReceiveBeacon(), and ScanningTimeout().

◆ m_pmModeSwitchTimeout

Time ns3::StaWifiMac::m_pmModeSwitchTimeout
private

PM mode switch timeout.

Definition at line 602 of file sta-wifi-mac.h.

Referenced by GetTypeId(), and SetPowerSaveMode().

◆ m_probeDelay

Ptr<RandomVariableStream> ns3::StaWifiMac::m_probeDelay
private

RandomVariable used to randomize the time of the first Probe Response on each channel.

Definition at line 600 of file sta-wifi-mac.h.

Referenced by AssignStreams(), GetTypeId(), and StartScanning().

◆ m_probeRequestTimeout

Time ns3::StaWifiMac::m_probeRequestTimeout
private

probe request timeout

Definition at line 593 of file sta-wifi-mac.h.

Referenced by GetTypeId(), and StartScanning().

◆ m_setupCanceled

TracedCallback<uint8_t, Mac48Address> ns3::StaWifiMac::m_setupCanceled
private

link setup canceled logger

Definition at line 614 of file sta-wifi-mac.h.

Referenced by GetTypeId().

◆ m_setupCompleted

TracedCallback<uint8_t, Mac48Address> ns3::StaWifiMac::m_setupCompleted
private

link setup completed logger

Definition at line 612 of file sta-wifi-mac.h.

Referenced by GetTypeId(), and ReceiveAssocResp().

◆ m_state

MacState ns3::StaWifiMac::m_state
private

◆ m_ulTidLinkMappingInAssocReq

WifiTidLinkMapping ns3::StaWifiMac::m_ulTidLinkMappingInAssocReq
private

store the UL TID-to-Link Mapping included in the Association Request frame

Definition at line 609 of file sta-wifi-mac.h.

Referenced by GetTidToLinkMappingElements(), and ReceiveAssocResp().

◆ m_waitBeaconTimeout

Time ns3::StaWifiMac::m_waitBeaconTimeout
private

wait beacon timeout

Definition at line 592 of file sta-wifi-mac.h.

Referenced by GetTypeId(), and StartScanning().


The documentation for this class was generated from the following files: