Lr-wpan MAC layer abstraction. More...

#include "lr-wpan-mac-base.h"

Inheritance diagram for ns3::lrwpan::LrWpanMacBase:

Collaboration diagram for ns3::lrwpan::LrWpanMacBase:

Public Member Functions
	~LrWpanMacBase () override

virtual void	McpsDataRequest (McpsDataRequestParams params, Ptr< Packet > p)=0
	IEEE 802.15.4-2006, section 7.1.1.1 MCPS-DATA.request Request to transfer a MSDU.

virtual void	MlmeAssociateRequest (MlmeAssociateRequestParams params)=0
	IEEE 802.15.4-2011, section 6.2.2.1 MLME-ASSOCIATE.request Request primitive used by a device to request an association with a coordinator.

virtual void	MlmeAssociateResponse (MlmeAssociateResponseParams params)=0
	IEEE 802.15.4-2011, section 6.2.2.3 MLME-ASSOCIATE.response Primitive used to initiate a response to an MLME-ASSOCIATE.indication primitive.

virtual void	MlmeGetRequest (MacPibAttributeIdentifier id)=0
	IEEE 802.15.4-2006, section 7.1.6.1 MLME-GET.request Request information about a given PIB attribute.

virtual void	MlmeOrphanResponse (MlmeOrphanResponseParams params)=0
	IEEE 802.15.4-2011, section 6.2.7.2 MLME-ORPHAN.response Primitive used to initiatte a response to an MLME-ORPHAN.indication primitive.

virtual void	MlmePollRequest (MlmePollRequestParams params)=0
	IEEE 802.15.4-2011, section 6.2.14.2 MLME-POLL.request Prompts the device to request data from the coordinator.

virtual void	MlmeScanRequest (MlmeScanRequestParams params)=0
	IEEE 802.15.4-2011, section 6.2.10.1 MLME-SCAN.request Request primitive used to initiate a channel scan over a given list of channels.

virtual void	MlmeSetRequest (MacPibAttributeIdentifier id, Ptr< MacPibAttributes > attribute)=0
	IEEE 802.15.4-2011, section 6.2.11.1 MLME-SET.request Attempts to write the given value to the indicated PIB attribute.

virtual void	MlmeStartRequest (MlmeStartRequestParams params)=0
	IEEE 802.15.4-2006, section 7.1.14.1 MLME-START.request Request to allow a PAN coordinator to initiate a new PAN or beginning a new superframe configuration.

virtual void	MlmeSyncRequest (MlmeSyncRequestParams params)=0
	IEEE 802.15.4-2011, section 6.2.13.1 MLME-SYNC.request Request to synchronize with the coordinator by acquiring and, if specified, tracking beacons.

void	SetMcpsDataConfirmCallback (McpsDataConfirmCallback c)
	Set the callback for the confirmation of a data transmission request.

void	SetMcpsDataIndicationCallback (McpsDataIndicationCallback c)
	Set the callback for the indication of an incoming data packet.

void	SetMlmeAssociateConfirmCallback (MlmeAssociateConfirmCallback c)
	Set the callback for the confirmation of a data transmission request.

void	SetMlmeAssociateIndicationCallback (MlmeAssociateIndicationCallback c)
	Set the callback for the indication of an incoming associate request command.

void	SetMlmeBeaconNotifyIndicationCallback (MlmeBeaconNotifyIndicationCallback c)
	Set the callback for the indication of an incoming beacon packet.

void	SetMlmeCommStatusIndicationCallback (MlmeCommStatusIndicationCallback c)
	Set the callback for the indication to a response primitive.

void	SetMlmeGetConfirmCallback (MlmeGetConfirmCallback c)
	Set the callback for the confirmation of an attempt to read an attribute.

void	SetMlmeOrphanIndicationCallback (MlmeOrphanIndicationCallback c)
	Set the callback for the indication to the reception of an orphan notification.

void	SetMlmePollConfirmCallback (MlmePollConfirmCallback c)
	Set the callback for the confirmation of a data transmission request.

void	SetMlmeScanConfirmCallback (MlmeScanConfirmCallback c)
	Set the callback for the confirmation of a data transmission request.

void	SetMlmeSetConfirmCallback (MlmeSetConfirmCallback c)
	Set the callback for the confirmation of an attempt to write an attribute.

void	SetMlmeStartConfirmCallback (MlmeStartConfirmCallback c)
	Set the callback for the confirmation of a data transmission request.

void	SetMlmeSyncLossIndicationCallback (MlmeSyncLossIndicationCallback c)
	Set the callback for the loss of synchronization with a coordinator.

Public Member Functions inherited from ns3::Object
	Object ()
	Constructor.

	~Object () override
	Destructor.

void	AggregateObject (Ptr< Object > other)
	Aggregate two Objects together.

void	Dispose ()
	Dispose of this Object.

AggregateIterator	GetAggregateIterator () const
	Get an iterator to the Objects aggregated to this one.

TypeId	GetInstanceTypeId () const override
	Get the most derived TypeId for this Object.

template<typename T >
Ptr< T >	GetObject () const
	Get a pointer to the requested aggregated Object.

template<>
Ptr< Object >	GetObject () const
	Specialization of () for objects of type ns3::Object.

template<typename T >
Ptr< T >	GetObject (TypeId tid) const
	Get a pointer to the requested aggregated Object by TypeId.

template<>
Ptr< Object >	GetObject (TypeId tid) const
	Specialization of (TypeId tid) for objects of type ns3::Object.

void	Initialize ()
	Invoke DoInitialize on all Objects aggregated to this one.

bool	IsInitialized () const
	Check if the object has been initialized.

void	UnidirectionalAggregateObject (Ptr< Object > other)
	Aggregate an Object to another Object.

Public Member Functions inherited from ns3::SimpleRefCount< Object, ObjectBase, ObjectDeleter >
	SimpleRefCount ()
	Default constructor.

	SimpleRefCount (const SimpleRefCount &o)
	Copy constructor.

uint32_t	GetReferenceCount () const
	Get the reference count of the object.

SimpleRefCount &	operator= (const SimpleRefCount &o)
	Assignment operator.

void	Ref () const
	Increment the reference count.

void	Unref () const
	Decrement the reference count.

Public Member Functions inherited from ns3::ObjectBase
virtual	~ObjectBase ()
	Virtual destructor.

void	GetAttribute (std::string name, AttributeValue &value, bool permissive=false) const
	Get the value of an attribute, raising fatal errors if unsuccessful.

bool	GetAttributeFailSafe (std::string name, AttributeValue &value) const
	Get the value of an attribute without raising errors.

void	SetAttribute (std::string name, const AttributeValue &value)
	Set a single attribute, raising fatal errors if unsuccessful.

bool	SetAttributeFailSafe (std::string name, const AttributeValue &value)
	Set a single attribute without raising errors.

bool	TraceConnect (std::string name, std::string context, const CallbackBase &cb)
	Connect a TraceSource to a Callback with a context.

bool	TraceConnectWithoutContext (std::string name, const CallbackBase &cb)
	Connect a TraceSource to a Callback without a context.

bool	TraceDisconnect (std::string name, std::string context, const CallbackBase &cb)
	Disconnect from a TraceSource a Callback previously connected with a context.

bool	TraceDisconnectWithoutContext (std::string name, const CallbackBase &cb)
	Disconnect from a TraceSource a Callback previously connected without a context.

Static Public Member Functions
static TypeId	GetTypeId ()
	Get the type ID.

Static Public Member Functions inherited from ns3::Object
static TypeId	GetTypeId ()
	Register this type.

Static Public Member Functions inherited from ns3::ObjectBase
static TypeId	GetTypeId ()
	Get the type ID.

Protected Attributes
McpsDataConfirmCallback	m_mcpsDataConfirmCallback
	This callback is used to report data transmission request status to the upper layers.

McpsDataIndicationCallback	m_mcpsDataIndicationCallback
	This callback is used to notify incoming packets to the upper layers.

MlmeAssociateConfirmCallback	m_mlmeAssociateConfirmCallback
	This callback is used to report the status after a device request an association with a coordinator.

MlmeAssociateIndicationCallback	m_mlmeAssociateIndicationCallback
	This callback is used to indicate the reception of an association request command.

MlmeBeaconNotifyIndicationCallback	m_mlmeBeaconNotifyIndicationCallback
	This callback is used to notify incoming beacon packets to the upper layers.

MlmeCommStatusIndicationCallback	m_mlmeCommStatusIndicationCallback
	This callback is instigated through a response primitive.

MlmeGetConfirmCallback	m_mlmeGetConfirmCallback
	This callback is used to report the result of an attribute read request to the upper layers.

MlmeOrphanIndicationCallback	m_mlmeOrphanIndicationCallback
	This callback is used to indicate the reception of a orphan notification command.

MlmePollConfirmCallback	m_mlmePollConfirmCallback
	This callback is used to report the status after a device send data command request to the coordinator to transmit data.

MlmeScanConfirmCallback	m_mlmeScanConfirmCallback
	This callback is used to report the result of a scan on a group of channels for the selected channel page.

MlmeSetConfirmCallback	m_mlmeSetConfirmCallback
	This callback is used to report the result of an attribute writing request to the upper layers.

MlmeStartConfirmCallback	m_mlmeStartConfirmCallback
	This callback is used to report the start of a new PAN or the begin of a new superframe configuration.

MlmeSyncLossIndicationCallback	m_mlmeSyncLossIndicationCallback
	This callback is used to indicate the loss of synchronization with a coordinator.

Additional Inherited Members
Protected Member Functions inherited from ns3::Object
	Object (const Object &o)
	Copy an Object.

virtual void	DoDispose ()
	Destructor implementation.

virtual void	DoInitialize ()
	Initialize() implementation.

virtual void	NotifyNewAggregate ()
	Notify all Objects aggregated to this one of a new Object being aggregated.

Protected Member Functions inherited from ns3::ObjectBase
void	ConstructSelf (const AttributeConstructionList &attributes)
	Complete construction of ObjectBase; invoked by derived classes.

virtual void	NotifyConstructionCompleted ()
	Notifier called once the ObjectBase is fully constructed.

Related Symbols inherited from ns3::ObjectBase
static TypeId	GetObjectIid ()
	Ensure the TypeId for ObjectBase gets fully configured to anchor the inheritance tree properly.

Detailed Description

Lr-wpan MAC layer abstraction.

This class defines the interface functions (primitives) used by a IEEE 802.15.4-2011 compliant MAC layer. Any lr-wpan MAC should extend from this class and implement the behavior of the basic MAC interfaces (primitives).

Definition at line 659 of file lr-wpan-mac-base.h.

Constructor & Destructor Documentation

◆ ~LrWpanMacBase()

ns3::lrwpan::LrWpanMacBase::~LrWpanMacBase ( )

override

Definition at line 32 of file lr-wpan-mac-base.cc.

Member Function Documentation

◆ GetTypeId()

TypeId ns3::lrwpan::LrWpanMacBase::GetTypeId ( )

static

Get the type ID.

Returns: the object TypeId

Definition at line 23 of file lr-wpan-mac-base.cc.

References ns3::TypeId::AddDeprecatedName(), and ns3::TypeId::SetParent().

Here is the call graph for this function:

◆ McpsDataRequest()

virtual void ns3::lrwpan::LrWpanMacBase::McpsDataRequest	(	McpsDataRequestParams	params,
		Ptr< Packet >	p )

pure virtual

IEEE 802.15.4-2006, section 7.1.1.1 MCPS-DATA.request Request to transfer a MSDU.

Parameters

params	the request parameters
p	the packet to be transmitted

Implemented in ns3::lrwpan::LrWpanMac.

◆ MlmeAssociateRequest()

virtual void ns3::lrwpan::LrWpanMacBase::MlmeAssociateRequest ( MlmeAssociateRequestParams params )

pure virtual

IEEE 802.15.4-2011, section 6.2.2.1 MLME-ASSOCIATE.request Request primitive used by a device to request an association with a coordinator.

Parameters

params the request parameters

Implemented in ns3::lrwpan::LrWpanMac.

◆ MlmeAssociateResponse()

virtual void ns3::lrwpan::LrWpanMacBase::MlmeAssociateResponse ( MlmeAssociateResponseParams params )

pure virtual

IEEE 802.15.4-2011, section 6.2.2.3 MLME-ASSOCIATE.response Primitive used to initiate a response to an MLME-ASSOCIATE.indication primitive.

Parameters

params the associate response parameters

Implemented in ns3::lrwpan::LrWpanMac.

◆ MlmeGetRequest()

virtual void ns3::lrwpan::LrWpanMacBase::MlmeGetRequest ( MacPibAttributeIdentifier id )

pure virtual

IEEE 802.15.4-2006, section 7.1.6.1 MLME-GET.request Request information about a given PIB attribute.

Note: The PibAttributeIndex parameter is not included because attributes that represent tables are not supported.

Parameters

id	the attribute identifier

Implemented in ns3::lrwpan::LrWpanMac.

◆ MlmeOrphanResponse()

virtual void ns3::lrwpan::LrWpanMacBase::MlmeOrphanResponse ( MlmeOrphanResponseParams params )

pure virtual

IEEE 802.15.4-2011, section 6.2.7.2 MLME-ORPHAN.response Primitive used to initiatte a response to an MLME-ORPHAN.indication primitive.

Parameters

params the orphan response parameters

Implemented in ns3::lrwpan::LrWpanMac.

◆ MlmePollRequest()

virtual void ns3::lrwpan::LrWpanMacBase::MlmePollRequest ( MlmePollRequestParams params )

pure virtual

IEEE 802.15.4-2011, section 6.2.14.2 MLME-POLL.request Prompts the device to request data from the coordinator.

Parameters

params the request parameters

Implemented in ns3::lrwpan::LrWpanMac.

◆ MlmeScanRequest()

virtual void ns3::lrwpan::LrWpanMacBase::MlmeScanRequest ( MlmeScanRequestParams params )

pure virtual

IEEE 802.15.4-2011, section 6.2.10.1 MLME-SCAN.request Request primitive used to initiate a channel scan over a given list of channels.

Parameters

params the scan request parameters

Implemented in ns3::lrwpan::LrWpanMac.

◆ MlmeSetRequest()

virtual void ns3::lrwpan::LrWpanMacBase::MlmeSetRequest	(	MacPibAttributeIdentifier	id,
		Ptr< MacPibAttributes >	attribute )

pure virtual

IEEE 802.15.4-2011, section 6.2.11.1 MLME-SET.request Attempts to write the given value to the indicated PIB attribute.

Parameters

id	the attributed identifier
attribute	the attribute value

Implemented in ns3::lrwpan::LrWpanMac.

◆ MlmeStartRequest()

virtual void ns3::lrwpan::LrWpanMacBase::MlmeStartRequest ( MlmeStartRequestParams params )

pure virtual

IEEE 802.15.4-2006, section 7.1.14.1 MLME-START.request Request to allow a PAN coordinator to initiate a new PAN or beginning a new superframe configuration.

Parameters

params the request parameters

Implemented in ns3::lrwpan::LrWpanMac.

◆ MlmeSyncRequest()

virtual void ns3::lrwpan::LrWpanMacBase::MlmeSyncRequest ( MlmeSyncRequestParams params )

pure virtual

IEEE 802.15.4-2011, section 6.2.13.1 MLME-SYNC.request Request to synchronize with the coordinator by acquiring and, if specified, tracking beacons.

Parameters

params the request parameters

Implemented in ns3::lrwpan::LrWpanMac.

◆ SetMcpsDataConfirmCallback()

void ns3::lrwpan::LrWpanMacBase::SetMcpsDataConfirmCallback ( McpsDataConfirmCallback c )

Set the callback for the confirmation of a data transmission request.

The callback implements MCPS-DATA.confirm SAP of IEEE 802.15.4-2006, section 7.1.1.2.

Parameters

c	the callback

Definition at line 37 of file lr-wpan-mac-base.cc.

References m_mcpsDataConfirmCallback.

◆ SetMcpsDataIndicationCallback()

void ns3::lrwpan::LrWpanMacBase::SetMcpsDataIndicationCallback ( McpsDataIndicationCallback c )

Set the callback for the indication of an incoming data packet.

The callback implements MCPS-DATA.indication SAP of IEEE 802.15.4-2006, section 7.1.1.3.

Parameters

c	the callback

Definition at line 43 of file lr-wpan-mac-base.cc.

References m_mcpsDataIndicationCallback.

◆ SetMlmeAssociateConfirmCallback()

void ns3::lrwpan::LrWpanMacBase::SetMlmeAssociateConfirmCallback ( MlmeAssociateConfirmCallback c )

Set the callback for the confirmation of a data transmission request.

The callback implements MLME-ASSOCIATE.confirm SAP of IEEE 802.15.4-2011, section 6.2.2.4.

Parameters

c	the callback

Definition at line 79 of file lr-wpan-mac-base.cc.

References m_mlmeAssociateConfirmCallback.

◆ SetMlmeAssociateIndicationCallback()

void ns3::lrwpan::LrWpanMacBase::SetMlmeAssociateIndicationCallback ( MlmeAssociateIndicationCallback c )

Set the callback for the indication of an incoming associate request command.

The callback implements MLME-ASSOCIATE.indication SAP of IEEE 802.15.4-2011, section 6.2.2.2.

Parameters

c	the callback

Definition at line 49 of file lr-wpan-mac-base.cc.

References m_mlmeAssociateIndicationCallback.

◆ SetMlmeBeaconNotifyIndicationCallback()

void ns3::lrwpan::LrWpanMacBase::SetMlmeBeaconNotifyIndicationCallback ( MlmeBeaconNotifyIndicationCallback c )

Set the callback for the indication of an incoming beacon packet.

The callback implements MLME-BEACON-NOTIFY.indication SAP of IEEE 802.15.4-2011, section 6.2.4.1.

Parameters

c	the callback

Definition at line 85 of file lr-wpan-mac-base.cc.

References m_mlmeBeaconNotifyIndicationCallback.

◆ SetMlmeCommStatusIndicationCallback()

void ns3::lrwpan::LrWpanMacBase::SetMlmeCommStatusIndicationCallback ( MlmeCommStatusIndicationCallback c )

Set the callback for the indication to a response primitive.

The callback implements MLME-COMM-STATUS.indication SAP of IEEE 802.15.4-2011, section 6.2.4.2.

Parameters

c	the callback

Definition at line 55 of file lr-wpan-mac-base.cc.

References m_mlmeCommStatusIndicationCallback.

◆ SetMlmeGetConfirmCallback()

void ns3::lrwpan::LrWpanMacBase::SetMlmeGetConfirmCallback ( MlmeGetConfirmCallback c )

Set the callback for the confirmation of an attempt to read an attribute.

The callback implements MLME-GET.confirm SAP of IEEE 802.15.4-2011, section 6.2.5.2

Parameters

c	the callback

Definition at line 103 of file lr-wpan-mac-base.cc.

References m_mlmeGetConfirmCallback.

◆ SetMlmeOrphanIndicationCallback()

void ns3::lrwpan::LrWpanMacBase::SetMlmeOrphanIndicationCallback ( MlmeOrphanIndicationCallback c )

Set the callback for the indication to the reception of an orphan notification.

The callback implements MLME-ORPHAN.indication SAP of IEEE 802.15.4-2011, section 6.2.7.1.

Parameters

c	the callback

Definition at line 61 of file lr-wpan-mac-base.cc.

References m_mlmeOrphanIndicationCallback.

◆ SetMlmePollConfirmCallback()

void ns3::lrwpan::LrWpanMacBase::SetMlmePollConfirmCallback ( MlmePollConfirmCallback c )

Set the callback for the confirmation of a data transmission request.

The callback implements MLME-POLL.confirm SAP of IEEE 802.15.4-2011, section 6.2.14.2

Parameters

c	the callback

Definition at line 109 of file lr-wpan-mac-base.cc.

References m_mlmePollConfirmCallback.

◆ SetMlmeScanConfirmCallback()

void ns3::lrwpan::LrWpanMacBase::SetMlmeScanConfirmCallback ( MlmeScanConfirmCallback c )

Set the callback for the confirmation of a data transmission request.

The callback implements MLME-SCAN.confirm SAP of IEEE 802.15.4-2011, section 6.2.10.2.

Parameters

c	the callback

Definition at line 73 of file lr-wpan-mac-base.cc.

References m_mlmeScanConfirmCallback.

◆ SetMlmeSetConfirmCallback()

void ns3::lrwpan::LrWpanMacBase::SetMlmeSetConfirmCallback ( MlmeSetConfirmCallback c )

Set the callback for the confirmation of an attempt to write an attribute.

The callback implements MLME-SET.confirm SAP of IEEE 802.15.4-2011, section 6.2.11.2

Parameters

c	the callback

Definition at line 97 of file lr-wpan-mac-base.cc.

References m_mlmeSetConfirmCallback.

◆ SetMlmeStartConfirmCallback()

void ns3::lrwpan::LrWpanMacBase::SetMlmeStartConfirmCallback ( MlmeStartConfirmCallback c )

Set the callback for the confirmation of a data transmission request.

The callback implements MLME-START.confirm SAP of IEEE 802.15.4-2006, section 7.1.14.2.

Parameters

c	the callback

Definition at line 67 of file lr-wpan-mac-base.cc.

References m_mlmeStartConfirmCallback.

◆ SetMlmeSyncLossIndicationCallback()

void ns3::lrwpan::LrWpanMacBase::SetMlmeSyncLossIndicationCallback ( MlmeSyncLossIndicationCallback c )

Set the callback for the loss of synchronization with a coordinator.

The callback implements MLME-SYNC-LOSS.indication SAP of IEEE 802.15.4-2011, section 6.2.13.2.

Parameters

c	the callback

Definition at line 91 of file lr-wpan-mac-base.cc.

References m_mlmeSyncLossIndicationCallback.

Member Data Documentation

◆ m_mcpsDataConfirmCallback

McpsDataConfirmCallback ns3::lrwpan::LrWpanMacBase::m_mcpsDataConfirmCallback

protected

This callback is used to report data transmission request status to the upper layers.

See IEEE 802.15.4-2006, section 7.1.1.2.

Definition at line 891 of file lr-wpan-mac-base.h.

Referenced by ns3::lrwpan::LrWpanMac::DoDispose(), ns3::lrwpan::LrWpanMac::EnqueueTxQElement(), ns3::lrwpan::LrWpanMac::McpsDataRequest(), ns3::lrwpan::LrWpanMac::PdDataConfirm(), ns3::lrwpan::LrWpanMac::PdDataIndication(), ns3::lrwpan::LrWpanMac::PrepareRetransmission(), ns3::lrwpan::LrWpanMac::PurgeInd(), ns3::lrwpan::LrWpanMac::SetLrWpanMacState(), and SetMcpsDataConfirmCallback().

◆ m_mcpsDataIndicationCallback

McpsDataIndicationCallback ns3::lrwpan::LrWpanMacBase::m_mcpsDataIndicationCallback

protected

This callback is used to notify incoming packets to the upper layers.

See IEEE 802.15.4-2006, section 7.1.1.3.

Definition at line 897 of file lr-wpan-mac-base.h.

Referenced by ns3::lrwpan::LrWpanMac::DoDispose(), ns3::lrwpan::LrWpanMac::PdDataIndication(), and SetMcpsDataIndicationCallback().

◆ m_mlmeAssociateConfirmCallback

MlmeAssociateConfirmCallback ns3::lrwpan::LrWpanMacBase::m_mlmeAssociateConfirmCallback

protected

This callback is used to report the status after a device request an association with a coordinator.

See IEEE 802.15.4-2011, section 6.2.2.4.

Definition at line 936 of file lr-wpan-mac-base.h.

Referenced by ns3::lrwpan::LrWpanMac::DoDispose(), ns3::lrwpan::LrWpanMac::LostAssocRespCommand(), ns3::lrwpan::LrWpanMac::MlmeAssociateRequest(), ns3::lrwpan::LrWpanMac::PdDataConfirm(), ns3::lrwpan::LrWpanMac::PlmeSetAttributeConfirm(), ns3::lrwpan::LrWpanMac::PrepareRetransmission(), ns3::lrwpan::LrWpanMac::SetLrWpanMacState(), and SetMlmeAssociateConfirmCallback().

◆ m_mlmeAssociateIndicationCallback

MlmeAssociateIndicationCallback ns3::lrwpan::LrWpanMacBase::m_mlmeAssociateIndicationCallback

protected

This callback is used to indicate the reception of an association request command.

See IEEE 802.15.4-2011, section 6.2.2.2

Definition at line 903 of file lr-wpan-mac-base.h.

Referenced by ns3::lrwpan::LrWpanMac::DoDispose(), ns3::lrwpan::LrWpanMac::PdDataConfirm(), and SetMlmeAssociateIndicationCallback().

◆ m_mlmeBeaconNotifyIndicationCallback

MlmeBeaconNotifyIndicationCallback ns3::lrwpan::LrWpanMacBase::m_mlmeBeaconNotifyIndicationCallback

protected

This callback is used to notify incoming beacon packets to the upper layers.

See IEEE 802.15.4-2011, section 6.2.4.1.

Definition at line 942 of file lr-wpan-mac-base.h.

Referenced by ns3::lrwpan::LrWpanMac::DoDispose(), ns3::lrwpan::LrWpanMac::ReceiveBeacon(), and SetMlmeBeaconNotifyIndicationCallback().

◆ m_mlmeCommStatusIndicationCallback

MlmeCommStatusIndicationCallback ns3::lrwpan::LrWpanMacBase::m_mlmeCommStatusIndicationCallback

protected

This callback is instigated through a response primitive.

See IEEE 802.15.4-2011, section 6.2.4.2

Definition at line 909 of file lr-wpan-mac-base.h.

Referenced by ns3::lrwpan::LrWpanMac::DoDispose(), ns3::lrwpan::LrWpanMac::EnqueueInd(), ns3::lrwpan::LrWpanMac::PdDataConfirm(), ns3::lrwpan::LrWpanMac::PdDataIndication(), ns3::lrwpan::LrWpanMac::PrepareRetransmission(), ns3::lrwpan::LrWpanMac::PurgeInd(), ns3::lrwpan::LrWpanMac::SetLrWpanMacState(), and SetMlmeCommStatusIndicationCallback().

◆ m_mlmeGetConfirmCallback

MlmeGetConfirmCallback ns3::lrwpan::LrWpanMacBase::m_mlmeGetConfirmCallback

protected

This callback is used to report the result of an attribute read request to the upper layers.

See IEEE 802.15.4-2011, section 6.2.5.2

Definition at line 962 of file lr-wpan-mac-base.h.

Referenced by ns3::lrwpan::LrWpanMac::MlmeGetRequest(), and SetMlmeGetConfirmCallback().

◆ m_mlmeOrphanIndicationCallback

MlmeOrphanIndicationCallback ns3::lrwpan::LrWpanMacBase::m_mlmeOrphanIndicationCallback

protected

This callback is used to indicate the reception of a orphan notification command.

See IEEE 802.15.4-2011, section 6.2.7.1

Definition at line 915 of file lr-wpan-mac-base.h.

Referenced by ns3::lrwpan::LrWpanMac::DoDispose(), ns3::lrwpan::LrWpanMac::PdDataIndication(), and SetMlmeOrphanIndicationCallback().

◆ m_mlmePollConfirmCallback

MlmePollConfirmCallback ns3::lrwpan::LrWpanMacBase::m_mlmePollConfirmCallback

protected

This callback is used to report the status after a device send data command request to the coordinator to transmit data.

See IEEE 802.15.4-2011, section 6.2.14.2.

Definition at line 969 of file lr-wpan-mac-base.h.

Referenced by ns3::lrwpan::LrWpanMac::DoDispose(), ns3::lrwpan::LrWpanMac::PdDataIndication(), ns3::lrwpan::LrWpanMac::PrepareRetransmission(), ns3::lrwpan::LrWpanMac::SetLrWpanMacState(), and SetMlmePollConfirmCallback().

◆ m_mlmeScanConfirmCallback

MlmeScanConfirmCallback ns3::lrwpan::LrWpanMacBase::m_mlmeScanConfirmCallback

protected

This callback is used to report the result of a scan on a group of channels for the selected channel page.

See IEEE 802.15.4-2011, section 6.2.10.2.

Definition at line 929 of file lr-wpan-mac-base.h.

Referenced by ns3::lrwpan::LrWpanMac::DoDispose(), ns3::lrwpan::LrWpanMac::EndChannelEnergyScan(), ns3::lrwpan::LrWpanMac::EndChannelScan(), ns3::lrwpan::LrWpanMac::MlmeScanRequest(), ns3::lrwpan::LrWpanMac::PdDataIndication(), ns3::lrwpan::LrWpanMac::PlmeSetAttributeConfirm(), and SetMlmeScanConfirmCallback().

◆ m_mlmeSetConfirmCallback

MlmeSetConfirmCallback ns3::lrwpan::LrWpanMacBase::m_mlmeSetConfirmCallback

protected

This callback is used to report the result of an attribute writing request to the upper layers.

See IEEE 802.15.4-2011, section 6.2.11.2.

Definition at line 955 of file lr-wpan-mac-base.h.

Referenced by ns3::lrwpan::LrWpanMac::MlmeSetRequest(), ns3::lrwpan::LrWpanMac::PlmeSetAttributeConfirm(), and SetMlmeSetConfirmCallback().

◆ m_mlmeStartConfirmCallback

MlmeStartConfirmCallback ns3::lrwpan::LrWpanMacBase::m_mlmeStartConfirmCallback

protected

This callback is used to report the start of a new PAN or the begin of a new superframe configuration.

See IEEE 802.15.4-2006, section 7.1.14.2.

Definition at line 922 of file lr-wpan-mac-base.h.

Referenced by ns3::lrwpan::LrWpanMac::DoDispose(), ns3::lrwpan::LrWpanMac::EndStartRequest(), ns3::lrwpan::LrWpanMac::MlmeStartRequest(), ns3::lrwpan::LrWpanMac::PdDataConfirm(), ns3::lrwpan::LrWpanMac::PlmeSetAttributeConfirm(), and SetMlmeStartConfirmCallback().

◆ m_mlmeSyncLossIndicationCallback

MlmeSyncLossIndicationCallback ns3::lrwpan::LrWpanMacBase::m_mlmeSyncLossIndicationCallback

protected

This callback is used to indicate the loss of synchronization with a coordinator.

See IEEE 802.15.4-2011, section 6.2.13.2.

Definition at line 948 of file lr-wpan-mac-base.h.

Referenced by ns3::lrwpan::LrWpanMac::BeaconSearchTimeout(), ns3::lrwpan::LrWpanMac::DoDispose(), and SetMlmeSyncLossIndicationCallback().

The documentation for this class was generated from the following files:

src/lr-wpan/model/lr-wpan-mac-base.h
src/lr-wpan/model/lr-wpan-mac-base.cc

Public Member Functions

Static Public Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ ~LrWpanMacBase()

Member Function Documentation

◆ GetTypeId()

◆ McpsDataRequest()

◆ MlmeAssociateRequest()

◆ MlmeAssociateResponse()

◆ MlmeGetRequest()

◆ MlmeOrphanResponse()

◆ MlmePollRequest()

◆ MlmeScanRequest()

◆ MlmeSetRequest()

◆ MlmeStartRequest()

◆ MlmeSyncRequest()

◆ SetMcpsDataConfirmCallback()

◆ SetMcpsDataIndicationCallback()

◆ SetMlmeAssociateConfirmCallback()

◆ SetMlmeAssociateIndicationCallback()

◆ SetMlmeBeaconNotifyIndicationCallback()

◆ SetMlmeCommStatusIndicationCallback()

◆ SetMlmeGetConfirmCallback()

◆ SetMlmeOrphanIndicationCallback()

◆ SetMlmePollConfirmCallback()

◆ SetMlmeScanConfirmCallback()

◆ SetMlmeSetConfirmCallback()

◆ SetMlmeStartConfirmCallback()

◆ SetMlmeSyncLossIndicationCallback()

Member Data Documentation

◆ m_mcpsDataConfirmCallback

◆ m_mcpsDataIndicationCallback

◆ m_mlmeAssociateConfirmCallback

◆ m_mlmeAssociateIndicationCallback

◆ m_mlmeBeaconNotifyIndicationCallback

◆ m_mlmeCommStatusIndicationCallback

◆ m_mlmeGetConfirmCallback

◆ m_mlmeOrphanIndicationCallback

◆ m_mlmePollConfirmCallback

◆ m_mlmeScanConfirmCallback

◆ m_mlmeSetConfirmCallback

◆ m_mlmeStartConfirmCallback

◆ m_mlmeSyncLossIndicationCallback