L4 Protocol abstract base class. More...
#include "ip-l4-protocol.h"
Public Types | |
typedef Callback< void, Ptr< Packet >, Ipv4Address, Ipv4Address, uint8_t, Ptr< Ipv4Route > > | DownTargetCallback |
callback to send packets over IPv4 | |
typedef Callback< void, Ptr< Packet >, Ipv6Address, Ipv6Address, uint8_t, Ptr< Ipv6Route > > | DownTargetCallback6 |
callback to send packets over IPv6 | |
enum | RxStatus { RX_OK , RX_CSUM_FAILED , RX_ENDPOINT_CLOSED , RX_ENDPOINT_UNREACH } |
Rx status codes. More... | |
Public Member Functions | |
~IpL4Protocol () override | |
virtual DownTargetCallback | GetDownTarget () const =0 |
This method allows a caller to get the current down target callback set for this L4 protocol (IPv4 case) | |
virtual DownTargetCallback6 | GetDownTarget6 () const =0 |
This method allows a caller to get the current down target callback set for this L4 protocol (IPv6 case) | |
virtual int | GetProtocolNumber () const =0 |
Returns the protocol number of this protocol. | |
virtual RxStatus | Receive (Ptr< Packet > p, const Ipv4Header &header, Ptr< Ipv4Interface > incomingInterface)=0 |
Called from lower-level layers to send the packet up in the stack. | |
virtual RxStatus | Receive (Ptr< Packet > p, const Ipv6Header &header, Ptr< Ipv6Interface > incomingInterface)=0 |
Called from lower-level layers to send the packet up in the stack. | |
virtual void | ReceiveIcmp (Ipv4Address icmpSource, uint8_t icmpTtl, uint8_t icmpType, uint8_t icmpCode, uint32_t icmpInfo, Ipv4Address payloadSource, Ipv4Address payloadDestination, const uint8_t payload[8]) |
Called from lower-level layers to send the ICMP packet up in the stack. | |
virtual void | ReceiveIcmp (Ipv6Address icmpSource, uint8_t icmpTtl, uint8_t icmpType, uint8_t icmpCode, uint32_t icmpInfo, Ipv6Address payloadSource, Ipv6Address payloadDestination, const uint8_t payload[8]) |
Called from lower-level layers to send the ICMPv6 packet up in the stack. | |
virtual void | SetDownTarget (DownTargetCallback cb)=0 |
This method allows a caller to set the current down target callback set for this L4 protocol (IPv4 case) | |
virtual void | SetDownTarget6 (DownTargetCallback6 cb)=0 |
This method allows a caller to set the current down target callback set for this L4 protocol (IPv6 case) | |
Public Member Functions inherited from ns3::Object | |
Object () | |
Constructor. | |
~Object () override | |
Destructor. | |
void | AggregateObject (Ptr< Object > other) |
Aggregate two Objects together. | |
void | Dispose () |
Dispose of this Object. | |
AggregateIterator | GetAggregateIterator () const |
Get an iterator to the Objects aggregated to this one. | |
TypeId | GetInstanceTypeId () const override |
Get the most derived TypeId for this Object. | |
template<typename T > | |
Ptr< T > | GetObject () const |
Get a pointer to the requested aggregated Object. | |
template<> | |
Ptr< Object > | GetObject () const |
Specialization of () for objects of type ns3::Object. | |
template<typename T > | |
Ptr< T > | GetObject (TypeId tid) const |
Get a pointer to the requested aggregated Object by TypeId. | |
template<> | |
Ptr< Object > | GetObject (TypeId tid) const |
Specialization of (TypeId tid) for objects of type ns3::Object. | |
void | Initialize () |
Invoke DoInitialize on all Objects aggregated to this one. | |
bool | IsInitialized () const |
Check if the object has been initialized. | |
void | UnidirectionalAggregateObject (Ptr< Object > other) |
Aggregate an Object to another Object. | |
Public Member Functions inherited from ns3::SimpleRefCount< Object, ObjectBase, ObjectDeleter > | |
SimpleRefCount () | |
Default constructor. | |
SimpleRefCount (const SimpleRefCount &o) | |
Copy constructor. | |
uint32_t | GetReferenceCount () const |
Get the reference count of the object. | |
SimpleRefCount & | operator= (const SimpleRefCount &o) |
Assignment operator. | |
void | Ref () const |
Increment the reference count. | |
void | Unref () const |
Decrement the reference count. | |
Public Member Functions inherited from ns3::ObjectBase | |
virtual | ~ObjectBase () |
Virtual destructor. | |
void | GetAttribute (std::string name, AttributeValue &value, bool permissive=false) const |
Get the value of an attribute, raising fatal errors if unsuccessful. | |
bool | GetAttributeFailSafe (std::string name, AttributeValue &value) const |
Get the value of an attribute without raising errors. | |
void | SetAttribute (std::string name, const AttributeValue &value) |
Set a single attribute, raising fatal errors if unsuccessful. | |
bool | SetAttributeFailSafe (std::string name, const AttributeValue &value) |
Set a single attribute without raising errors. | |
bool | TraceConnect (std::string name, std::string context, const CallbackBase &cb) |
Connect a TraceSource to a Callback with a context. | |
bool | TraceConnectWithoutContext (std::string name, const CallbackBase &cb) |
Connect a TraceSource to a Callback without a context. | |
bool | TraceDisconnect (std::string name, std::string context, const CallbackBase &cb) |
Disconnect from a TraceSource a Callback previously connected with a context. | |
bool | TraceDisconnectWithoutContext (std::string name, const CallbackBase &cb) |
Disconnect from a TraceSource a Callback previously connected without a context. | |
Static Public Member Functions | |
static TypeId | GetTypeId () |
Get the type ID. | |
Static Public Member Functions inherited from ns3::Object | |
static TypeId | GetTypeId () |
Register this type. | |
Static Public Member Functions inherited from ns3::ObjectBase | |
static TypeId | GetTypeId () |
Get the type ID. | |
Additional Inherited Members | |
Protected Member Functions inherited from ns3::Object | |
Object (const Object &o) | |
Copy an Object. | |
virtual void | DoDispose () |
Destructor implementation. | |
virtual void | DoInitialize () |
Initialize() implementation. | |
virtual void | NotifyNewAggregate () |
Notify all Objects aggregated to this one of a new Object being aggregated. | |
Protected Member Functions inherited from ns3::ObjectBase | |
void | ConstructSelf (const AttributeConstructionList &attributes) |
Complete construction of ObjectBase; invoked by derived classes. | |
virtual void | NotifyConstructionCompleted () |
Notifier called once the ObjectBase is fully constructed. | |
Related Symbols inherited from ns3::ObjectBase | |
static TypeId | GetObjectIid () |
Ensure the TypeId for ObjectBase gets fully configured to anchor the inheritance tree properly. | |
L4 Protocol abstract base class.
This is an abstract base class for layer four protocols which use IP as the network layer.
Definition at line 40 of file ip-l4-protocol.h.
typedef Callback<void, Ptr<Packet>, Ipv4Address, Ipv4Address, uint8_t, Ptr<Ipv4Route> > ns3::IpL4Protocol::DownTargetCallback |
callback to send packets over IPv4
Definition at line 142 of file ip-l4-protocol.h.
typedef Callback<void, Ptr<Packet>, Ipv6Address, Ipv6Address, uint8_t, Ptr<Ipv6Route> > ns3::IpL4Protocol::DownTargetCallback6 |
callback to send packets over IPv6
Definition at line 147 of file ip-l4-protocol.h.
Rx status codes.
Enumerator | |
---|---|
RX_OK | |
RX_CSUM_FAILED | |
RX_ENDPOINT_CLOSED | |
RX_ENDPOINT_UNREACH |
Definition at line 46 of file ip-l4-protocol.h.
|
override |
Definition at line 39 of file ip-l4-protocol.cc.
References NS_LOG_FUNCTION.
|
pure virtual |
This method allows a caller to get the current down target callback set for this L4 protocol (IPv4 case)
Implemented in ns3::dsr::DsrRouting, ns3::Icmpv4L4Protocol, ns3::Icmpv6L4Protocol, ns3::TcpL4Protocol, and ns3::UdpL4Protocol.
|
pure virtual |
This method allows a caller to get the current down target callback set for this L4 protocol (IPv6 case)
Implemented in ns3::dsr::DsrRouting, ns3::Icmpv4L4Protocol, ns3::Icmpv6L4Protocol, ns3::TcpL4Protocol, and ns3::UdpL4Protocol.
|
pure virtual |
Returns the protocol number of this protocol.
Implemented in ns3::dsr::DsrRouting, ns3::Icmpv4L4Protocol, ns3::Icmpv6L4Protocol, ns3::TcpL4Protocol, and ns3::UdpL4Protocol.
Referenced by GetTypeId().
|
static |
Get the type ID.
Definition at line 25 of file ip-l4-protocol.cc.
References ns3::TypeId::ATTR_GET, GetProtocolNumber(), ns3::MakeIntegerAccessor(), ns3::MakeIntegerChecker(), and ns3::TypeId::SetParent().
|
pure virtual |
Called from lower-level layers to send the packet up in the stack.
p | packet to forward up |
header | IPv4 Header information |
incomingInterface | the Ipv4Interface on which the packet arrived |
Implemented in ns3::dsr::DsrRouting, ns3::Icmpv4L4Protocol, ns3::Icmpv6L4Protocol, ns3::TcpL4Protocol, and ns3::UdpL4Protocol.
|
pure virtual |
Called from lower-level layers to send the packet up in the stack.
p | packet to forward up |
header | IPv6 Header information |
incomingInterface | the Ipv6Interface on which the packet arrived |
Implemented in ns3::dsr::DsrRouting, ns3::Icmpv4L4Protocol, ns3::Icmpv6L4Protocol, ns3::TcpL4Protocol, and ns3::UdpL4Protocol.
|
virtual |
Called from lower-level layers to send the ICMP packet up in the stack.
icmpSource | the source address of the icmp message |
icmpTtl | the ttl of the icmp message |
icmpType | the 'type' field of the icmp message |
icmpCode | the 'code' field of the icmp message |
icmpInfo | extra information dependent on the icmp message generated by Icmpv4L4Protocol |
payloadSource | the source address of the packet which triggered the icmp message |
payloadDestination | the destination address of the packet which triggered the icmp message. |
payload | the first 8 bytes of the packet payload which triggered the icmp message. |
Reimplemented in ns3::TcpL4Protocol, and ns3::UdpL4Protocol.
Definition at line 45 of file ip-l4-protocol.cc.
References NS_LOG_FUNCTION.
|
virtual |
Called from lower-level layers to send the ICMPv6 packet up in the stack.
icmpSource | the source address of the icmp message |
icmpTtl | the ttl of the icmp message |
icmpType | the 'type' field of the icmp message |
icmpCode | the 'code' field of the icmp message |
icmpInfo | extra information dependent on the icmp message generated by Icmpv6L4Protocol |
payloadSource | the source address of the packet which triggered the icmp message |
payloadDestination | the destination address of the packet which triggered the icmp message. |
payload | the first 8 bytes of the packet payload which triggered the icmp message. |
Reimplemented in ns3::TcpL4Protocol, and ns3::UdpL4Protocol.
Definition at line 60 of file ip-l4-protocol.cc.
References NS_LOG_FUNCTION.
|
pure virtual |
This method allows a caller to set the current down target callback set for this L4 protocol (IPv4 case)
cb | current Callback for the L4 protocol |
Implemented in ns3::dsr::DsrRouting, ns3::Icmpv4L4Protocol, ns3::Icmpv6L4Protocol, ns3::TcpL4Protocol, and ns3::UdpL4Protocol.
|
pure virtual |
This method allows a caller to set the current down target callback set for this L4 protocol (IPv6 case)
cb | current Callback for the L4 protocol |
Implemented in ns3::dsr::DsrRouting, ns3::Icmpv4L4Protocol, ns3::Icmpv6L4Protocol, ns3::TcpL4Protocol, and ns3::UdpL4Protocol.