Build a set of PointToPointNetDevice objects. More...

#include "point-to-point-helper.h"

Inheritance diagram for ns3::PointToPointHelper:

Collaboration diagram for ns3::PointToPointHelper:

Public Member Functions
	PointToPointHelper ()
	Create a PointToPointHelper to make life easier when creating point to point networks.

	~PointToPointHelper () override

void	DisableFlowControl ()
	Disable flow control only if you know what you are doing.

NetDeviceContainer	Install (NodeContainer c)

NetDeviceContainer	Install (Ptr< Node > a, Ptr< Node > b)

NetDeviceContainer	Install (Ptr< Node > a, std::string bName)

NetDeviceContainer	Install (std::string aName, Ptr< Node > b)

NetDeviceContainer	Install (std::string aNode, std::string bNode)

void	SetChannelAttribute (std::string name, const AttributeValue &value)
	Set an attribute value to be propagated to each Channel created by the helper.

void	SetDeviceAttribute (std::string name, const AttributeValue &value)
	Set an attribute value to be propagated to each NetDevice created by the helper.

template<typename... Ts>
void	SetQueue (std::string type, Ts &&... args)
	Each point to point net device must have a queue to pass packets through.

Public Member Functions inherited from ns3::PcapHelperForDevice
	PcapHelperForDevice ()
	Construct a PcapHelperForDevice.

virtual	~PcapHelperForDevice ()
	Destroy a PcapHelperForDevice.

void	EnablePcap (std::string prefix, NetDeviceContainer d, bool promiscuous=false)
	Enable pcap output on each device in the container which is of the appropriate type.

void	EnablePcap (std::string prefix, NodeContainer n, bool promiscuous=false)
	Enable pcap output on each device (which is of the appropriate type) in the nodes provided in the container.

void	EnablePcap (std::string prefix, Ptr< NetDevice > nd, bool promiscuous=false, bool explicitFilename=false)
	Enable pcap output the indicated net device.

void	EnablePcap (std::string prefix, std::string ndName, bool promiscuous=false, bool explicitFilename=false)
	Enable pcap output the indicated net device using a device previously named using the ns-3 object name service.

void	EnablePcap (std::string prefix, uint32_t nodeid, uint32_t deviceid, bool promiscuous=false)
	Enable pcap output on the device specified by a global node-id (of a previously created node) and associated device-id.

void	EnablePcapAll (std::string prefix, bool promiscuous=false)
	Enable pcap output on each device (which is of the appropriate type) in the set of all nodes created in the simulation.

Public Member Functions inherited from ns3::AsciiTraceHelperForDevice
	AsciiTraceHelperForDevice ()
	Construct an AsciiTraceHelperForDevice.

virtual	~AsciiTraceHelperForDevice ()
	Destroy an AsciiTraceHelperForDevice.

void	EnableAscii (Ptr< OutputStreamWrapper > stream, NetDeviceContainer d)
	Enable ascii trace output on each device in the container which is of the appropriate type.

void	EnableAscii (Ptr< OutputStreamWrapper > stream, NodeContainer n)
	Enable ascii trace output on each device (which is of the appropriate type) in the nodes provided in the container.

void	EnableAscii (Ptr< OutputStreamWrapper > stream, Ptr< NetDevice > nd)
	Enable ascii trace output on the indicated net device.

void	EnableAscii (Ptr< OutputStreamWrapper > stream, std::string ndName)
	Enable ascii trace output the indicated net device using a device previously named using the ns-3 object name service.

void	EnableAscii (Ptr< OutputStreamWrapper > stream, uint32_t nodeid, uint32_t deviceid)
	Enable ascii trace output on the device specified by a global node-id (of a previously created node) and associated device-id.

void	EnableAscii (std::string prefix, NetDeviceContainer d)
	Enable ascii trace output on each device in the container which is of the appropriate type.

void	EnableAscii (std::string prefix, NodeContainer n)
	Enable ascii trace output on each device (which is of the appropriate type) in the nodes provided in the container.

void	EnableAscii (std::string prefix, Ptr< NetDevice > nd, bool explicitFilename=false)
	Enable ascii trace output on the indicated net device.

void	EnableAscii (std::string prefix, std::string ndName, bool explicitFilename=false)
	Enable ascii trace output the indicated net device using a device previously named using the ns-3 object name service.

void	EnableAscii (std::string prefix, uint32_t nodeid, uint32_t deviceid, bool explicitFilename)
	Enable ascii trace output on the device specified by a global node-id (of a previously created node) and associated device-id.

void	EnableAsciiAll (Ptr< OutputStreamWrapper > stream)
	Enable ascii trace output on each device (which is of the appropriate type) in the set of all nodes created in the simulation.

void	EnableAsciiAll (std::string prefix)
	Enable ascii trace output on each device (which is of the appropriate type) in the set of all nodes created in the simulation.

Private Member Functions
void	EnableAsciiInternal (Ptr< OutputStreamWrapper > stream, std::string prefix, Ptr< NetDevice > nd, bool explicitFilename) override
	Enable ascii trace output on the indicated net device.

void	EnablePcapInternal (std::string prefix, Ptr< NetDevice > nd, bool promiscuous, bool explicitFilename) override
	Enable pcap output the indicated net device.

Private Attributes
ObjectFactory	m_channelFactory
	Channel Factory.

ObjectFactory	m_deviceFactory
	Device Factory.

bool	m_enableFlowControl
	whether to enable flow control

ObjectFactory	m_queueFactory
	Queue Factory.

Detailed Description

Build a set of PointToPointNetDevice objects.

Normally we eschew multiple inheritance, however, the classes PcapUserHelperForDevice and AsciiTraceUserHelperForDevice are "mixins".

Definition at line 32 of file point-to-point-helper.h.

Constructor & Destructor Documentation

◆ PointToPointHelper()

ns3::PointToPointHelper::PointToPointHelper ( )

Create a PointToPointHelper to make life easier when creating point to point networks.

Definition at line 34 of file point-to-point-helper.cc.

References m_channelFactory, m_deviceFactory, m_enableFlowControl, m_queueFactory, and ns3::ObjectFactory::SetTypeId().

Here is the call graph for this function:

◆ ~PointToPointHelper()

ns3::PointToPointHelper::~PointToPointHelper ( )

inlineoverride

Definition at line 41 of file point-to-point-helper.h.

Member Function Documentation

◆ DisableFlowControl()

void ns3::PointToPointHelper::DisableFlowControl ( )

Disable flow control only if you know what you are doing.

By disabling flow control, this NetDevice will be sent packets even if there is no room for them (such packets will be likely dropped by this NetDevice). Also, any queue disc installed on this NetDevice will have no effect, as every packet enqueued to the traffic control layer queue disc will be immediately dequeued.

Definition at line 55 of file point-to-point-helper.cc.

References m_enableFlowControl.

◆ EnableAsciiInternal()

void ns3::PointToPointHelper::EnableAsciiInternal	(	Ptr< OutputStreamWrapper >	stream,
		std::string	prefix,
		Ptr< NetDevice >	nd,
		bool	explicitFilename )

overrideprivatevirtual

Enable ascii trace output on the indicated net device.

NetDevice-specific implementation mechanism for hooking the trace and writing to the trace file.

Parameters

stream	The output stream object to use when logging ascii traces.
prefix	Filename prefix to use for ascii trace files.
nd	Net device for which you want to enable tracing.
explicitFilename	Treat the prefix as an explicit filename if true

Implements ns3::AsciiTraceHelperForDevice.

Definition at line 95 of file point-to-point-helper.cc.

Here is the call graph for this function:

◆ EnablePcapInternal()

void ns3::PointToPointHelper::EnablePcapInternal	(	std::string	prefix,
		Ptr< NetDevice >	nd,
		bool	promiscuous,
		bool	explicitFilename )

overrideprivatevirtual

Enable pcap output the indicated net device.

NetDevice-specific implementation mechanism for hooking the trace and writing to the trace file.

Parameters

prefix	Filename prefix to use for pcap files.
nd	Net device for which you want to enable tracing.
promiscuous	If true capture all possible packets available at the device.
explicitFilename	Treat the prefix as an explicit filename if true

Implements ns3::PcapHelperForDevice.

Definition at line 61 of file point-to-point-helper.cc.

References ns3::PcapHelper::CreateFile(), ns3::PcapHelper::DLT_PPP, ns3::PcapHelper::GetFilenameFromDevice(), ns3::PcapHelper::HookDefaultSink(), and NS_LOG_INFO.

Here is the call graph for this function:

◆ Install() [1/5]

NetDeviceContainer ns3::PointToPointHelper::Install ( NodeContainer c )

Parameters

c	a set of nodes

Returns: a NetDeviceContainer for nodes

This method creates a ns3::PointToPointChannel with the attributes configured by PointToPointHelper::SetChannelAttribute, then, for each node in the input container, we create a ns3::PointToPointNetDevice with the requested attributes, a queue for this ns3::NetDevice, and associate the resulting ns3::NetDevice with the ns3::Node and ns3::PointToPointChannel.

Definition at line 220 of file point-to-point-helper.cc.

References ns3::NodeContainer::Get(), ns3::NodeContainer::GetN(), Install(), and NS_ASSERT.

Referenced by ns3::NoBackhaulEpcHelper::NoBackhaulEpcHelper(), ns3::PointToPointDumbbellHelper::PointToPointDumbbellHelper(), ns3::PointToPointStarHelper::PointToPointStarHelper(), ns3::PointToPointEpcHelper::AddEnb(), ns3::NoBackhaulEpcHelper::AddX2Interface(), ns3::BriteTopologyHelper::ConstructTopology(), EpcS1uDlTestCase::DoRun(), EpcS1uUlTestCase::DoRun(), LenaCqaFfMacSchedulerTestCase1::DoRun(), LenaCqaFfMacSchedulerTestCase2::DoRun(), LenaFdTbfqFfMacSchedulerTestCase1::DoRun(), LenaFdTbfqFfMacSchedulerTestCase2::DoRun(), LenaPssFfMacSchedulerTestCase1::DoRun(), LenaPssFfMacSchedulerTestCase2::DoRun(), LenaTdTbfqFfMacSchedulerTestCase1::DoRun(), LenaTdTbfqFfMacSchedulerTestCase2::DoRun(), LteCellSelectionTestCase::DoRun(), LteDistributedFfrAreaTestCase::DoRun(), LteEpcE2eDataTestCase::DoRun(), LteHandoverTargetTestCase::DoRun(), LteIpv6RoutingTestCase::DoRun(), LteRadioLinkFailureTestCase::DoRun(), LteUeMeasurementsHandoverTestCase::DoRun(), LteX2HandoverMeasuresTestCase::DoRun(), LteX2HandoverTestCase::DoRun(), ns3::LenaDeactivateBearerTestCase::DoRun(), Ns3TcpCubicTestCase::DoRun(), experiment(), Install(), Install(), Install(), and Install().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ Install() [2/5]

NetDeviceContainer ns3::PointToPointHelper::Install	(	Ptr< Node >	a,
		Ptr< Node >	b )

Parameters

a	first node
b	second node

Returns: a NetDeviceContainer for nodes

Saves you from having to construct a temporary NodeContainer. Also, if MPI is enabled, for distributed simulations, appropriate remote point-to-point channels are created.

Definition at line 227 of file point-to-point-helper.cc.

References ns3::Mac48Address::Allocate(), ns3::ObjectFactory::Create(), ns3::CreateObject(), ns3::MpiInterface::GetSystemId(), ns3::MpiInterface::IsEnabled(), m_channelFactory, m_deviceFactory, m_enableFlowControl, m_queueFactory, ns3::MakeCallback(), ns3::PointToPointNetDevice::Receive(), and ns3::ObjectFactory::SetTypeId().

Here is the call graph for this function:

◆ Install() [3/5]

NetDeviceContainer ns3::PointToPointHelper::Install	(	Ptr< Node >	a,
		std::string	bName )

Parameters

a	first node
bName	name of second node

Returns: a NetDeviceContainer for nodes

Saves you from having to construct a temporary NodeContainer.

Definition at line 298 of file point-to-point-helper.cc.

References ns3::Names::Find(), and Install().

Here is the call graph for this function:

◆ Install() [4/5]

NetDeviceContainer ns3::PointToPointHelper::Install	(	std::string	aName,
		Ptr< Node >	b )

Parameters

aName	Name of first node
b	second node

Returns: a NetDeviceContainer for nodes

Saves you from having to construct a temporary NodeContainer.

Definition at line 305 of file point-to-point-helper.cc.

References ns3::Names::Find(), and Install().

Here is the call graph for this function:

◆ Install() [5/5]

NetDeviceContainer ns3::PointToPointHelper::Install	(	std::string	aNode,
		std::string	bNode )

Parameters

aNode	Name of first node
bNode	Name of second node

Returns: a NetDeviceContainer for nodes

Saves you from having to construct a temporary NodeContainer.

Definition at line 312 of file point-to-point-helper.cc.

References ns3::Names::Find(), and Install().

Here is the call graph for this function:

◆ SetChannelAttribute()

void ns3::PointToPointHelper::SetChannelAttribute	(	std::string	name,
		const AttributeValue &	value )

Set an attribute value to be propagated to each Channel created by the helper.

Parameters

name	the name of the attribute to set
value	the value of the attribute to set

Set these attribute on each ns3::PointToPointChannel created by PointToPointHelper::Install

Definition at line 49 of file point-to-point-helper.cc.

References m_channelFactory, and ns3::ObjectFactory::Set().

Referenced by ns3::NoBackhaulEpcHelper::NoBackhaulEpcHelper(), ns3::PointToPointEpcHelper::AddEnb(), ns3::NoBackhaulEpcHelper::AddX2Interface(), ns3::BriteTopologyHelper::ConstructTopology(), LenaCqaFfMacSchedulerTestCase1::DoRun(), LenaCqaFfMacSchedulerTestCase2::DoRun(), LenaFdTbfqFfMacSchedulerTestCase1::DoRun(), LenaFdTbfqFfMacSchedulerTestCase2::DoRun(), LenaPssFfMacSchedulerTestCase1::DoRun(), LenaPssFfMacSchedulerTestCase2::DoRun(), LenaTdTbfqFfMacSchedulerTestCase1::DoRun(), LenaTdTbfqFfMacSchedulerTestCase2::DoRun(), LteCellSelectionTestCase::DoRun(), LteDistributedFfrAreaTestCase::DoRun(), LteEpcE2eDataTestCase::DoRun(), LteHandoverTargetTestCase::DoRun(), LteIpv6RoutingTestCase::DoRun(), LteRadioLinkFailureTestCase::DoRun(), LteUeMeasurementsHandoverTestCase::DoRun(), LteX2HandoverMeasuresTestCase::DoRun(), LteX2HandoverTestCase::DoRun(), ns3::LenaDeactivateBearerTestCase::DoRun(), Ns3TcpCubicTestCase::DoRun(), and experiment().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ SetDeviceAttribute()

void ns3::PointToPointHelper::SetDeviceAttribute	(	std::string	name,
		const AttributeValue &	value )

Set an attribute value to be propagated to each NetDevice created by the helper.

Parameters

name	the name of the attribute to set
value	the value of the attribute to set

Set these attributes on each ns3::PointToPointNetDevice created by PointToPointHelper::Install

Definition at line 43 of file point-to-point-helper.cc.

References m_deviceFactory, and ns3::ObjectFactory::Set().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ SetQueue()

template<typename... Ts>

void ns3::PointToPointHelper::SetQueue	(	std::string	type,
		Ts &&...	args )

Each point to point net device must have a queue to pass packets through.

This method allows one to set the type of the queue that is automatically created when the device is created and attached to a node.

Template Parameters

Ts	[deduced] Argument types

Parameters

	type	the type of queue
[in]	args	Name and AttributeValue pairs to set.

Set the type of queue to create and associated to each PointToPointNetDevice created through PointToPointHelper::Install.

Definition at line 190 of file point-to-point-helper.h.

References ns3::QueueBase::AppendItemTypeIfNotPresent(), m_queueFactory, ns3::ObjectFactory::Set(), and ns3::ObjectFactory::SetTypeId().

Referenced by Ns3TcpCubicTestCase::DoRun().

Here is the call graph for this function:

Here is the caller graph for this function:

Member Data Documentation

◆ m_channelFactory

ObjectFactory ns3::PointToPointHelper::m_channelFactory

private

Channel Factory.

Definition at line 179 of file point-to-point-helper.h.

Referenced by PointToPointHelper(), Install(), and SetChannelAttribute().

◆ m_deviceFactory

ObjectFactory ns3::PointToPointHelper::m_deviceFactory

private

Device Factory.

Definition at line 180 of file point-to-point-helper.h.

Referenced by PointToPointHelper(), Install(), and SetDeviceAttribute().

◆ m_enableFlowControl

bool ns3::PointToPointHelper::m_enableFlowControl

private

whether to enable flow control

Definition at line 181 of file point-to-point-helper.h.

Referenced by PointToPointHelper(), DisableFlowControl(), and Install().

◆ m_queueFactory

ObjectFactory ns3::PointToPointHelper::m_queueFactory

private

Queue Factory.

Definition at line 178 of file point-to-point-helper.h.

Referenced by PointToPointHelper(), Install(), and SetQueue().

The documentation for this class was generated from the following files:

src/point-to-point/helper/point-to-point-helper.h
src/point-to-point/helper/point-to-point-helper.cc

Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ PointToPointHelper()

◆ ~PointToPointHelper()

Member Function Documentation

◆ DisableFlowControl()

◆ EnableAsciiInternal()

◆ EnablePcapInternal()

◆ Install() [1/5]

◆ Install() [2/5]

◆ Install() [3/5]

◆ Install() [4/5]

◆ Install() [5/5]

◆ SetChannelAttribute()

◆ SetDeviceAttribute()

◆ SetQueue()

Member Data Documentation

◆ m_channelFactory

◆ m_deviceFactory

◆ m_enableFlowControl

◆ m_queueFactory