This SpectrumChannel implementation can handle the presence of SpectrumPhy instances which can use different spectrum models, i.e., different SpectrumModel. More...

#include "multi-model-spectrum-channel.h"

Inheritance diagram for ns3::MultiModelSpectrumChannel:

Collaboration diagram for ns3::MultiModelSpectrumChannel:

Public Member Functions
	MultiModelSpectrumChannel ()

void	AddRx (Ptr< SpectrumPhy > phy) override
	Add a SpectrumPhy to a channel, so it can receive packets.

Ptr< NetDevice >	GetDevice (std::size_t i) const override

std::size_t	GetNDevices () const override

void	RemoveRx (Ptr< SpectrumPhy > phy) override
	Remove a SpectrumPhy from a channel.

void	StartTx (Ptr< SpectrumSignalParameters > params) override
	Used by attached PHY instances to transmit signals on the channel.

Public Member Functions inherited from ns3::SpectrumChannel
	SpectrumChannel ()
	constructor

	~SpectrumChannel () override
	destructor

void	AddPhasedArraySpectrumPropagationLossModel (Ptr< PhasedArraySpectrumPropagationLossModel > loss)
	Add the frequency-dependent propagation loss model that is compapatible with the phased antenna arrays at the TX and RX.

void	AddPropagationLossModel (Ptr< PropagationLossModel > loss)
	Add the single-frequency propagation loss model to be used.

void	AddSpectrumPropagationLossModel (Ptr< SpectrumPropagationLossModel > loss)
	Add the frequency-dependent propagation loss model to be used.

void	AddSpectrumTransmitFilter (Ptr< SpectrumTransmitFilter > filter)
	Add the transmit filter to be used to filter possible signal receptions at the StartTx() time.

int64_t	AssignStreams (int64_t stream)
	This method calls AssignStreams() on any/all of the PropagationLossModel, PropagationDelayModel, SpectrumPropagationLossModel, PhasedArraySpectrumPropagationLossModel, and SpectrumTransmitFilter objects that have been added to this channel.

void	DoDispose () override
	Destructor implementation.

Ptr< PhasedArraySpectrumPropagationLossModel >	GetPhasedArraySpectrumPropagationLossModel () const
	Get the frequency-dependent propagation loss model that is compatible with the phased antenna arrays at TX and RX.

Ptr< PropagationDelayModel >	GetPropagationDelayModel () const
	Get the propagation delay model that has been set on the channel.

Ptr< PropagationLossModel >	GetPropagationLossModel () const
	Get the propagation loss model.

Ptr< SpectrumPropagationLossModel >	GetSpectrumPropagationLossModel () const
	Get the frequency-dependent propagation loss model.

Ptr< SpectrumTransmitFilter >	GetSpectrumTransmitFilter () const
	Get the transmit filter, or first in a chain of transmit filters if more than one is present.

void	SetPropagationDelayModel (Ptr< PropagationDelayModel > delay)
	Set the propagation delay model to be used.

Public Member Functions inherited from ns3::Channel
	Channel ()

	~Channel () override

uint32_t	GetId () const

Public Member Functions inherited from ns3::Object
	Object ()
	Constructor.

	~Object () override
	Destructor.

void	AggregateObject (Ptr< Object > other)
	Aggregate two Objects together.

void	Dispose ()
	Dispose of this Object.

AggregateIterator	GetAggregateIterator () const
	Get an iterator to the Objects aggregated to this one.

TypeId	GetInstanceTypeId () const override
	Get the most derived TypeId for this Object.

template<typename T >
Ptr< T >	GetObject () const
	Get a pointer to the requested aggregated Object.

template<>
Ptr< Object >	GetObject () const
	Specialization of () for objects of type ns3::Object.

template<typename T >
Ptr< T >	GetObject (TypeId tid) const
	Get a pointer to the requested aggregated Object by TypeId.

template<>
Ptr< Object >	GetObject (TypeId tid) const
	Specialization of (TypeId tid) for objects of type ns3::Object.

void	Initialize ()
	Invoke DoInitialize on all Objects aggregated to this one.

bool	IsInitialized () const
	Check if the object has been initialized.

void	UnidirectionalAggregateObject (Ptr< Object > other)
	Aggregate an Object to another Object.

Public Member Functions inherited from ns3::SimpleRefCount< Object, ObjectBase, ObjectDeleter >
	SimpleRefCount ()
	Default constructor.

	SimpleRefCount (const SimpleRefCount &o)
	Copy constructor.

uint32_t	GetReferenceCount () const
	Get the reference count of the object.

SimpleRefCount &	operator= (const SimpleRefCount &o)
	Assignment operator.

void	Ref () const
	Increment the reference count.

void	Unref () const
	Decrement the reference count.

Public Member Functions inherited from ns3::ObjectBase
virtual	~ObjectBase ()
	Virtual destructor.

void	GetAttribute (std::string name, AttributeValue &value, bool permissive=false) const
	Get the value of an attribute, raising fatal errors if unsuccessful.

bool	GetAttributeFailSafe (std::string name, AttributeValue &value) const
	Get the value of an attribute without raising errors.

void	SetAttribute (std::string name, const AttributeValue &value)
	Set a single attribute, raising fatal errors if unsuccessful.

bool	SetAttributeFailSafe (std::string name, const AttributeValue &value)
	Set a single attribute without raising errors.

bool	TraceConnect (std::string name, std::string context, const CallbackBase &cb)
	Connect a TraceSource to a Callback with a context.

bool	TraceConnectWithoutContext (std::string name, const CallbackBase &cb)
	Connect a TraceSource to a Callback without a context.

bool	TraceDisconnect (std::string name, std::string context, const CallbackBase &cb)
	Disconnect from a TraceSource a Callback previously connected with a context.

bool	TraceDisconnectWithoutContext (std::string name, const CallbackBase &cb)
	Disconnect from a TraceSource a Callback previously connected without a context.

Static Public Member Functions
static TypeId	GetTypeId ()
	Get the type ID.

Static Public Member Functions inherited from ns3::SpectrumChannel
static TypeId	GetTypeId ()
	Get the type ID.

Static Public Member Functions inherited from ns3::Channel
static TypeId	GetTypeId ()
	Get the type ID.

Static Public Member Functions inherited from ns3::Object
static TypeId	GetTypeId ()
	Register this type.

Static Public Member Functions inherited from ns3::ObjectBase
static TypeId	GetTypeId ()
	Get the type ID.

Protected Member Functions
void	DoDispose () override
	Destructor implementation.

Protected Member Functions inherited from ns3::SpectrumChannel
virtual int64_t	DoAssignStreams (int64_t stream)
	This provides a base class implementation that may be subclassed if needed by subclasses that might need additional stream assignments.

Protected Member Functions inherited from ns3::Object
	Object (const Object &o)
	Copy an Object.

virtual void	DoInitialize ()
	Initialize() implementation.

virtual void	NotifyNewAggregate ()
	Notify all Objects aggregated to this one of a new Object being aggregated.

Protected Member Functions inherited from ns3::ObjectBase
void	ConstructSelf (const AttributeConstructionList &attributes)
	Complete construction of ObjectBase; invoked by derived classes.

virtual void	NotifyConstructionCompleted ()
	Notifier called once the ObjectBase is fully constructed.

Private Member Functions
TxSpectrumModelInfoMap_t::const_iterator	FindAndEventuallyAddTxSpectrumModel (Ptr< const SpectrumModel > txSpectrumModel)
	This method checks if m_rxSpectrumModelInfoMap contains an entry for the given TX SpectrumModel.

virtual void	StartRx (Ptr< SpectrumSignalParameters > params, Ptr< SpectrumPhy > receiver)
	Used internally to reschedule transmission after the propagation delay.

Private Attributes
std::size_t	m_numDevices
	Number of devices connected to the channel.

RxSpectrumModelInfoMap_t	m_rxSpectrumModelInfoMap
	Data structure holding, for each RX spectrum model, all the corresponding SpectrumPhy instances.

TxSpectrumModelInfoMap_t	m_txSpectrumModelInfoMap
	Data structure holding, for each TX SpectrumModel, all the converters to any RX SpectrumModel, and all the corresponding SpectrumPhy instances.

Additional Inherited Members
Public Types inherited from ns3::SpectrumChannel
typedef void(*	GainTracedCallback) (Ptr< const MobilityModel > txMobility, Ptr< const MobilityModel > rxMobility, double txAntennaGain, double rxAntennaGain, double propagationGain, double pathloss)
	TracedCallback signature for path loss calculation events.

typedef void(*	LossTracedCallback) (Ptr< const SpectrumPhy > txPhy, Ptr< const SpectrumPhy > rxPhy, double lossDb)
	TracedCallback signature for path loss calculation events.

typedef void(*	SignalParametersTracedCallback) (Ptr< SpectrumSignalParameters > params)
	TracedCallback signature for Ptr<const SpectrumSignalParameters>.

Protected Attributes inherited from ns3::SpectrumChannel
Ptr< SpectrumTransmitFilter >	m_filter {nullptr}
	Transmit filter to be used with this channel.

TracedCallback< Ptr< const MobilityModel >, Ptr< const MobilityModel >, double, double, double, double >	m_gainTrace
	The `Gain` trace source.

double	m_maxLossDb
	Maximum loss [dB].

TracedCallback< Ptr< const SpectrumPhy >, Ptr< const SpectrumPhy >, double >	m_pathLossTrace
	The `PathLoss` trace source.

Ptr< PhasedArraySpectrumPropagationLossModel >	m_phasedArraySpectrumPropagationLoss
	Frequency-dependent propagation loss model to be used with this channel.

Ptr< PropagationDelayModel >	m_propagationDelay
	Propagation delay model to be used with this channel.

Ptr< PropagationLossModel >	m_propagationLoss
	Single-frequency propagation loss model to be used with this channel.

Ptr< SpectrumPropagationLossModel >	m_spectrumPropagationLoss
	Frequency-dependent propagation loss model to be used with this channel.

TracedCallback< Ptr< SpectrumSignalParameters > >	m_txSigParamsTrace
	Traced callback for SpectrumSignalParameters in StartTx requests.

Related Symbols inherited from ns3::ObjectBase
static TypeId	GetObjectIid ()
	Ensure the TypeId for ObjectBase gets fully configured to anchor the inheritance tree properly.

Detailed Description

This SpectrumChannel implementation can handle the presence of SpectrumPhy instances which can use different spectrum models, i.e., different SpectrumModel.

Note: It is allowed for a receiving SpectrumPhy to switch to a different SpectrumModel during the simulation. The requirement for this to work is that, after the SpectrumPhy switched its SpectrumModel, MultiModelSpectrumChannel::AddRx () is called again passing the pointer to that SpectrumPhy.

Definition at line 92 of file multi-model-spectrum-channel.h.

Constructor & Destructor Documentation

◆ MultiModelSpectrumChannel()

ns3::MultiModelSpectrumChannel::MultiModelSpectrumChannel ( )

Definition at line 72 of file multi-model-spectrum-channel.cc.

References NS_LOG_FUNCTION.

Member Function Documentation

◆ AddRx()

void ns3::MultiModelSpectrumChannel::AddRx ( Ptr< SpectrumPhy > phy )

overridevirtual

Add a SpectrumPhy to a channel, so it can receive packets.

This method is used to attach a SpectrumPhy instance to a SpectrumChannel instance, so that the SpectrumPhy can receive packets sent on that channel. Note that a SpectrumPhy that only transmits (without receiving ever) does not need to be added to the channel.

This method is to be implemented by all classes inheriting from SpectrumChannel.

Parameters

phy	the SpectrumPhy instance to be added to the channel as a receiver.

Implements ns3::SpectrumChannel.

Definition at line 125 of file multi-model-spectrum-channel.cc.

References m_numDevices, m_rxSpectrumModelInfoMap, m_txSpectrumModelInfoMap, NS_ASSERT, NS_ASSERT_MSG, NS_LOG_FUNCTION, NS_LOG_LOGIC, and RemoveRx().

Here is the call graph for this function:

◆ DoDispose()

void ns3::MultiModelSpectrumChannel::DoDispose ( )

overrideprotectedvirtual

Destructor implementation.

This method is called by Dispose() or by the Object's destructor, whichever comes first.

Subclasses are expected to implement their real destruction code in an overridden version of this method and chain up to their parent's implementation once they are done. i.e, for simplicity, the destructor of every subclass should be empty and its content should be moved to the associated DoDispose() method.

It is safe to call GetObject() from within this method.

Reimplemented from ns3::Object.

Definition at line 79 of file multi-model-spectrum-channel.cc.

References ns3::SpectrumChannel::DoDispose(), m_rxSpectrumModelInfoMap, m_txSpectrumModelInfoMap, and NS_LOG_FUNCTION.

Here is the call graph for this function:

◆ FindAndEventuallyAddTxSpectrumModel()

TxSpectrumModelInfoMap_t::const_iterator ns3::MultiModelSpectrumChannel::FindAndEventuallyAddTxSpectrumModel ( Ptr< const SpectrumModel > txSpectrumModel )

private

This method checks if m_rxSpectrumModelInfoMap contains an entry for the given TX SpectrumModel.

If such entry exists, it returns an iterator pointing to it. If not, it creates a new entry in m_txSpectrumModelInfoMap, and returns an iterator to it.

Parameters

txSpectrumModel The TX SpectrumModel being considered

Returns: An iterator pointing to the corresponding entry in m_txSpectrumModelInfoMap

Definition at line 173 of file multi-model-spectrum-channel.cc.

References m_rxSpectrumModelInfoMap, m_txSpectrumModelInfoMap, NS_ASSERT, NS_LOG_FUNCTION, and NS_LOG_LOGIC.

Referenced by StartRx().

Here is the caller graph for this function:

◆ GetDevice()

Ptr< NetDevice > ns3::MultiModelSpectrumChannel::GetDevice ( std::size_t i ) const

overridevirtual

Parameters

i	index of NetDevice to retrieve

Returns: one of the NetDevices connected to this channel.

This method must be implemented by subclasses.

Implements ns3::Channel.

Definition at line 432 of file multi-model-spectrum-channel.cc.

References m_numDevices, m_rxSpectrumModelInfoMap, NS_ASSERT, and NS_FATAL_ERROR.

◆ GetNDevices()

std::size_t ns3::MultiModelSpectrumChannel::GetNDevices ( ) const

overridevirtual

Returns: the number of NetDevices connected to this Channel.

This method must be implemented by subclasses.

Implements ns3::Channel.

Definition at line 426 of file multi-model-spectrum-channel.cc.

References m_numDevices.

◆ GetTypeId()

TypeId ns3::MultiModelSpectrumChannel::GetTypeId ( )

static

Get the type ID.

Returns: the object TypeId

Definition at line 88 of file multi-model-spectrum-channel.cc.

References ns3::TypeId::SetParent().

Referenced by ns3::LteHelper::LteHelper().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ RemoveRx()

void ns3::MultiModelSpectrumChannel::RemoveRx ( Ptr< SpectrumPhy > phy )

overridevirtual

Remove a SpectrumPhy from a channel.

This method is used to detach a SpectrumPhy instance from a SpectrumChannel instance, so that the SpectrumPhy does not receive packets sent on that channel.

This method is to be implemented by all classes inheriting from SpectrumChannel.

Parameters